Advanced Search
    Articles in press have been peer-reviewed and accepted, which are not yet assigned to volumes /issues, but are citable by Digital Object Identifier (DOI).
    Forming Process Optimization and Mechanical Properties of Bronze/Steel and Steel/Bronze Composite Thin Walls Fabricated by Cold Metal Transfer Arc Additive Manufacturing
    LI Deyini, XU Yulang, ZHANG Cheng, ZHAO Xianrui, LI Zhanjiang, ZHANG Qiangyong, XIAO Dengguang
    DOI: 10.11973/jxgccl250298
    Abstract PDF
    Optimization of Ultrasonic Rolling Process Parameters Based on PSO-BP Neural Network and NSGA-II Algorithm
    LAN Yeshen, RAO Chuchu, CHEN Chao, LYU Yunpeng
    DOI: 10.11973/jxgccl250462
    Abstract PDF
    Microstructure and Wear Resistance of Ni62F Alloy Flux-Cored Wire Surfacing Layer with Different Iron and Chromium Contents
    WU Bin, ZHUANG Lijun, YANG Hao, WU Jing, PAN Fengbo, AN Bingzhou
    DOI: 10.11973/jxgccl250449
    Abstract PDF
    Effect of Rare Earth La on Microstructure and Mechanical Properties of Fe-Ni-Al Maraging Steel During Isothermal Aging
    YAO Ke, WANG Haiyan, ZHOU Tong, GAO Xueyun, XUE Chunjiang, HAN Yan, ZHANG Renyun
    DOI: 10.11973/jxgccl250445
    Abstract PDF
    Friction and Wear Properties of M2 Steel Composites Synergistically Reinforced with Micro-TiCN and Nano-ZrO2
    ZHOU Zhenyu, HUANG Shiqiang, OU Changjie, ZOU Xinchang, LIU Kang
    DOI: 10.11973/jxgccl250448
    Abstract PDF
    Dynamic Deformation Behavior of UF340 Novel Steel for Automotive Outer Panels
    ZHANG Junping, FANG Gang, ZHOU Jia, ZHOU Zhansong, NIU Liqiang, LI Xiaoyu, LU Hongzhou, JIN Lei, GUAN Jiandong, GUO Aiming
    DOI: 10.11973/jxgccl250424
    Abstract PDF
    Effect of Nb Content on Microstructure and Properties of SA516Gr70 Steel for Pressure Vessel
    SHAO Chunjuan, ZHEN Fan, QU Jinbo, WU Fengjuan
    DOI: 10.11973/jxgccl250284
    Abstract PDF
    High-Temperature Low-Cycle Fatigue Properties of Inconel 617 Alloy at 700 °C
    WU Jun, ZHENG Yexun, LI Bingbing, CHEN Xu, LIU Yuanwen
    DOI: 10.11973/jxgccl250267
    Abstract PDF
    Influence of Ultrasonic Assistance on Microstructure and Tensile Properties of Friction Stir Welded Joints of 2A12/7075 Dissimilar Aluminum Alloys
    WANG Yongqi, WANG Pengyu, BAI Zhihao, ZHANG Yu, ZHOU Dongshuai, WANG Jian
    DOI: 10.11973/jxgccl250421
    Abstract PDF
    Effect of Different Nitride Additions on Microstructure and Mechanical Properties of As-extruded AZ61 Magnesium Alloy
    QIU Wei, YANG Lingfei, CHEN Wei, ZHANG Senmao, LI Cong, CHEN Jian
    DOI: 10.11973/jxgccl250275
    Abstract PDF
    Comparison of Microstructure and Properties of Domestic and Imported T10 Steel Valve Plates
    WU Zhaopeng, TANG Ling, YUAN Xingdong, FU Mingming, JI Yunping, ZHANG Yongsheng, LI Yiming
    DOI: 10.11973/jxgccl250263
    Abstract PDF
    Effects of Intermediate Annealing on Microstructure and Properties of Cu-1.0Ag Alloy with High Strength and High Conductivity
    LI Yongdi, WU Zhenyu, PAN Kai, ZHANG Pengpeng, WEI Yi, LU Tairong
    DOI: 10.11973/jxgccl250255
    Abstract PDF
    Optimization of Heat Treatment Process for 65Mn Tool Steel
    YANG Fanrong, LI Wen, CONG Yuan, WANG Tong, CHEN Liupeng, PEI Xinhua, MAO Xiangyang
    DOI: 10.11973/jxgccl250257
    Abstract PDF
    Microstructure and Sliding Friction and Wear Properties of Hardfacing Layer of High Chromium Bimetallic Wear-Resistant Plate
    LIU Tianjun, LI Xintong, WANG Qingliang
    DOI: 10.11973/jxgccl250250
    Abstract PDF
    Effect of Heat Treatment on Properties of SiCp/Al-Mg-Si-Cu Alloy Composites
    SHI Yuanji, RIZIWANGULI, LI Fangjie, ZHAN Yihui, CHEN Zeyu, ZHOU Xie, YAN Xiangyang, TANG Renhao
    DOI: 10.11973/jxgccl250066
    Abstract PDF
    High Temperature Austenitic Deformation Behavior of X80 Pipeline Steel
    WU Xiaolong, ZHOU Yuqing, YANG Yuhou, WANG Jiaojiao, HOU Wei, ZHAO Linlin, WANG Zhuo, SONG Honglong
    DOI: 10.11973/jxgccl250232
    Abstract PDF
    Life Proportion Laws of Creep Crack Initiation and Propagation of FGH96 Alloy
    FU Zehuan, ZHAO Xinyuan, ZHENG Dong, ZHUANG Shuying, ZHAO Xinyu, HU Xuteng
    DOI: 10.11973/jxgccl250223
    Abstract PDF
    Influencing Factors and Mechanism of Impact Toughness of G115 Steel Joint Welded by CHW-SG115 Wire Submerged Arc Welding
    HUO Xilong, CAO Rui, LONG Haixiao, JIA Xingwang, YANG Fei, XU Xiaolong, LIAO Jianrong
    DOI: 10.11973/jxgccl250168
    Abstract PDF
    Microstructure and Properties of Traditional and Rapid Cooling Friction Stir Welded Joints of High Strength Automotive Steel
    QIU Kai, ZHANG Lu
    DOI: 10.11973/jxgccl250308
    Abstract PDF
    Low Cycle Fatigue Properties of Laser Selective Melting Ti-6Al-4V alloy after direct aging treatment
    GONG Lichao, YAO Zhenhua, LIN Zhixiong, XIE Yunqi, HANG Song, CHEN Hailong
    DOI: 10.11973/jxgccl250169
    Abstract PDF
    Abrasive Design and Material Removal Performance of Aluminum Chemical Mechanical Polishing
    YIN Chao, ZHANG Ronghua, WAN Junxi, XIE Wenjun, HU Xiaokai
    DOI: 10.11973/jxgccl250345
    Abstract PDF
    Life Analysis of Nickel-base Single Crystal Alloy Porous Plates under High Temperature Creep-Fatigue Interaction
    XIANG Shouliang, SHI Duoqi, LI Nina, ZHAO Ya, ZHU Kangjie, YANG Xiaoguang
    DOI: 10.11973/jxgccl250324
    Abstract PDF
    Microstructure and Mechanical Properties of GTD-111 Superalloy First-Stage Turbine Blade Repaired by Laser Welding
    SHANGGUAN Xingang, WANG Guang, SUN Yasong, HAO Chen, LIU Wenbo
    DOI: 10.11973/jxgccl250350
    Abstract PDF
    Evaluation of High Strain Rate Sensitivity in Single Crystal Aluminum via Laser Induced Projectile Impact
    YOU Yulin, CHEN Jiayu, LUO Guohu, HU Yongxiang
    DOI: 10.11973/jxgccl250148
    Abstract PDF
    Effects of Argon Shielding Condition on Surface Microstructure and Phase of Weld of 316L Stainless Steel Pipe
    DENG Shen, CHEN Genbao, ZHU Xiongming, YAO Liang, TANG Mingqi, ZHANG Qingke, SONG Zhenlun
    DOI: 10.11973/jxgccl250332
    Abstract PDF
    Effect of rolling rate on microstructure, mechanical properties and damping properties of Mg-0.5% Al alloy
    HAN Qianyue, SUN Youping, HE Jiangmei, LU Yuwei, ZHANG Kaifei
    DOI: 10.11973/jxgccl250338
    Abstract PDF
    Superplasticity and Its Stability of Rolled TC4 Titanium Alloy Thick Plates for Deep-Sea Application
    QIU Yu, LU Zichuan, YANG Jianhui, WU Yong
    DOI: 10.11973/jxgccl250262
    Abstract PDF
    Microstructure Evolution and Mechanical Properties of a Ni-Cr-Al Superalloy During Aging
    LI Ang, WANG Mingyang, TAN Yi, LI Pengting
    DOI: 10.11973/jxgccl250179
    Abstract PDF
    Microstructure and Properties of Laser-Cladded FeCoNiCrMnNdx High-Entropy Alloy Coating
    FANG Jie, XU Jianwei, WANG Wenjie, LYU Peng, LIU Shibin
    DOI: 10.11973/jxgccl250491
    Abstract PDF
    Numerical Simulation of Welding Residual Stress in Butt Multi-Pass Welded Steel Plate
    WANG Yanxiang, LI Yuanrui, JIAO Yang, WANG Xiaopeng, ZHANG Genhua, LIU Haishun
    DOI: 10.11973/jxgccl250203
    Abstract PDF
    Fluid-Elastic Instability of Heat-Transfer Tubes with Small Mass Damping Parameters in Two-Phase Flow Environment
    HAN Peize, MA Penghui, CHEN Zhengqiao, TAN Wei, ZHU Guorui
    DOI: 10.11973/jxgccl240374
    Abstract PDF
    Research Status on Metal/Non-Metal Doped Composite Lubricant Films Prepared by Magnetron Sputtering
    LI Wenqi, RONG Yi, LI Wenge, ZHAO Yuantao
    2026, 50(4): 1-6, 13. DOI: 10.11973/jxgccl250088
    Abstract PDF
    Corrosion Behavior of Different Steels for Sulfuric Acid Alkylation System in Ammonium Sulfate Solution
    ZHANG Song, OU Guofu, ZHAO Yupei
    2026, 50(4): 7-13. DOI: 10.11973/jxgccl250027
    Abstract PDF
    Effect of Grinding Rotation Speed on Material Removal Behavior of U75V Steel Rail Welded Joint
    LIU Xuemin, LIU Yi, WANG Shixin, YOU Jinhong, ZHANG Wulin, CHENG Yu
    2026, 50(4): 14-20. DOI: 10.11973/jxgccl240558
    Abstract PDF
    Effect of Isothermal Quenching Duration on Microstructure and Properties of 18NiCrMo14-6 Carburized Bearing Steel
    LI Pan, XIAO Yuanzhao, LIU Xiaopei, XU Hui, ZHANG Chi
    2026, 50(4): 21-26, 43. DOI: 10.11973/jxgccl250052
    Abstract PDF
    Effect of Ultrasonic Rolling on Surface Structure and Properties of 7050 Aluminum Alloy
    ZHANG Xingyue, LIN Lianghua, XU Lanshan, ZOU Yang
    2026, 50(4): 27-31. DOI: 10.11973/jxgccl250413
    Abstract PDF
    Effect of Surface Roughness on Corrosion Behavior of N80 Carbon Steel in CO2 Environment
    YANG Qi, ZHOU Yuping, LEI Haoran, ZHANG Haifeng, LIU Wei, HAN Binhu, CAO Feng, LI Dejun, GUO Xiaojun
    2026, 50(4): 32-37. DOI: 10.11973/jxgccl250503
    Abstract PDF
    Influence of Drawing Deformation on Microstructure and Mechanical Properties of FeCrCoWNi High Entropy Alloy
    LI Yapeng, ZHOU Ziyi
    2026, 50(4): 38-43. DOI: 10.11973/jxgccl250356
    Abstract PDF
    Effect of Robot Speed on Microstructure and Mechanical Properties of 5356 Aluminum Alloy Fabricated by Cold Metal Transfer Arc Additive Manufacturing
    LIU Shuangyao, SUN Yipu, LIU Zilu, LI Zupeng, WANG Ruiquan, WANG Wei, LU Yanan, CHEN Guang
    2026, 50(4): 44-52. DOI: 10.11973/jxgccl250468
    Abstract PDF
    Effects of Rare Earth Element Modification on Microstructure and Properties of In-situ Self-generated Mg2Si Reinforced Al-based Composites
    TANG Hui, CHEN Shengqian, SONG Xinhua, ZHONG Peiyun
    2026, 50(4): 53-58, 64. DOI: 10.11973/jxgccl250489
    Abstract PDF
    Corrosion Resistance and Ice Suppression Performance of Electrophoretic Deposition PFA Coating on Aluminum Alloy Profiles Surface
    WANG Xiaoyang, LIU Shuai, YANG Yuanting, WU Kefan
    2026, 50(4): 59-64. DOI: 10.11973/jxgccl250493
    Abstract PDF
    Tribological Properties of Nanosecond Laser Surface Textured Nickel-Based Amorphous Alloy Coatings
    ZHAO Mengna, LI Guang, XU Jianfei, ZHAO Qiang, CAI Shiyu, HAN Bingyuan
    2026, 50(4): 65-71. DOI: 10.11973/jxgccl250336
    Abstract PDF
    Effect of Cu Content on Double-Peak Aging Hardening Behavior and Precipitation Strengthening Mechanism of Al-Si-Mg-Cu Alloys
    ZHOU Pengfei, BEN Nengjun, ZHANG Xiaowei, HUI Weidong
    2026, 50(4): 72-77, 84. DOI: 10.11973/jxgccl250145
    Abstract PDF
    Energy Absorption Characteristics of Triply Periodic Minimal Surface Filled Tapered Tubes under Quasi-Static Axial Compression
    LÜ Yujin, LIANG Laiyu, WANG Zhe, WANG Huawei, WU Yaozhong
    2026, 50(4): 78-84. DOI: 10.11973/jxgccl250354
    Abstract PDF
    Finite Element Simulation on Instability Characteristics of Aluminum Alloy Sandwich Plates
    SUN Shoule, ZHANG Chaofeng, WANG Shuangli, PANG Liehui, LI Jiahao
    2026, 50(4): 85-91. DOI: 10.11973/jxgccl250299
    Abstract PDF
    Effect of Cooling Rate on Grain Refinement of ZL114A Alloy Solidification Structure under Pulsed Magnetic Field
    LIU Yang, BAI Qingwei, ZHANG Kaihua, ZHANG Jiahui, LIU Tao, WANG Bo, GAO Haitao, ZHANG Yupeng
    2026, 50(4): 92-99. DOI: 10.11973/jxgccl250019
    Abstract PDF
    Yield Strength Prediction of NbTaW-Based High-Entropy Alloys by Machine Learning
    YAN Huanqi, DENG Dunying, WEN Hanqing, TONG Yonggang
    2026, 50(4): 100-105. DOI: 10.11973/jxgccl250048
    Abstract PDF
    Compressive Deformation Behavior and Constitutive Model of SiCp/6092 Aluminum Alloy Composite
    WANG Dongliang, ZHANG Jilin
    2026, 50(4): 106-111, 120. DOI: 10.11973/jxgccl250364
    Abstract PDF
    Influence of Tool Convex Hull Structure on Cold Expansion Strengthening Effect of Non-round Holes
    CHEN Jiasheng, LEI Xuelin, WANG Jiachen, ZHU Defu, TIAN Yongjun, CHENG Lüyi, ZHANG Xiancheng
    2026, 50(4): 112-120. DOI: 10.11973/jxgccl250067
    Abstract PDF
    Tensile Strength Testing of Ultra-Thin Sheets Based on Small Punch Test
    WANG Haibo, SUN Haisheng, MA Yiming, LI Chang, GUAN Kaishu, HAO Kaikai, QI Xing
    2026, 50(4): 121-126. DOI: 10.11973/jxgccl250065
    Abstract PDF