高级检索
    刘卫民, 陈勇, 刘永刚, 沈星. 交叉指形电极压电纤维复合材料的优化设计[J]. 机械工程材料, 2006, 30(2): 29-31.
    引用本文: 刘卫民, 陈勇, 刘永刚, 沈星. 交叉指形电极压电纤维复合材料的优化设计[J]. 机械工程材料, 2006, 30(2): 29-31.
    shu
    LIU Wei-min, CHEN Yong, LIU Yong-gang, SHEN Xing. Performance Improvement of Interdigitated Electrodes Piezoelectric Fiber Composites[J]. Materials and Mechanical Engineering, 2006, 30(2): 29-31.
    Citation: LIU Wei-min, CHEN Yong, LIU Yong-gang, SHEN Xing. Performance Improvement of Interdigitated Electrodes Piezoelectric Fiber Composites[J]. Materials and Mechanical Engineering, 2006, 30(2): 29-31.
    shu

    交叉指形电极压电纤维复合材料的优化设计

    Performance Improvement of Interdigitated Electrodes Piezoelectric Fiber Composites

      摘要
    • 摘要: 交叉指形电极压电纤维复合材料是1-3型压电复合材料的新成员,以提高其驱动应变为目的,采用有限元软件ANSYS分析了其驱动特性,并给出了组分材料特性对驱动性能的影响规律.结果表明:采用低弹性模量、高泊松比的压电相和聚合物相有利于提高压电片的驱动应变;聚合物相的介电常数对驱动应变影响最大,采用高介电常数的聚合物相可以使其驱动应变明显提高.

       

      Abstract: Interdigitated electrodes piezoelectric fiber composites (IDEs) are new members of 1-3 piezoelectric composites.In order to improve the performance of IDEs,the software ANSYS was used to analyze the strain affected by piezoelectric and polymer.The actuation performance of IDEs could be improved efficiently by selecting piezoelectric and polymer with low Youngs modulus and high Poisson ratio.The permittivity of polymer was more important to actuation performance and high permittivity could improve strain more.

       

      • HTML全文
      • 参考文献(8)
      • 相关文章
      • 施引文献
    • 资源附件(0)

    /

    返回文章
    返回