Advanced Search
    Articles in press have been peer-reviewed and accepted, which are not yet assigned to volumes /issues, but are citable by Digital Object Identifier (DOI).
    Corrosion Fatigue Crack Growth Behavior of 2.25Cr1Mo Steel in Steam Generator Service Environment
    LIU Chao, LIU Wenzhi, FU Xiaogang, ZHANG Baoliang
    DOI: 10.11973/jxgccl250572
    Abstract PDF
    Effect of Cooling Rate of Stabilization Annealing on Microstructure and Tensile Properties of 617 Alloy
    CHEN Lingzhi, KAN Chen, ZHANG Guo, ZHANG Maoyuan, QI Jianing, ZHENG Yue
    DOI: 10.11973/jxgccl250323
    Abstract PDF
    Stress Corrosion Crack Growth Behavior of Nickel-Based Alloy 690 for a Valve in Pressurized Water Reactor Primary Circuit
    DING Kai, PENG Cheng, ZHANG Xu, YUAN Xinyu, WANG Jiamei, CHEN Kai, ZHANG Lefu
    DOI: 10.11973/jxgccl260002
    Abstract PDF
    Research Status on Metal/Non-Metal Doped Composite Lubricant Films Prepared by Magnetron Sputtering
    LI Wenqi, RONG Yi, LI Wenge, ZHAO Yuantao
    DOI: 10.11973/jxgccl250088
    Abstract PDF
    Influence of CoSO4 Mass Concentration in Electrodeposition Bath on Microstructure and Properties of Ni-Co-CeO2 Composite Coating
    ZHANG Jianing, ZHAO Yuantao, LIU Shenqiang¹, LI Yu¹, LI Haoxiang¹, ZHONG Ning¹, LI Wenge¹, LI Ke
    DOI: 10.11973/jxgccl250114
    Abstract PDF
    Effect of Isothermal Quenching Duration on Microstructure and Properties of 18NiCrMo14-6 Carburized Bearing Steel
    LI Pan, XIAO Yuanzhao, LIU Xiaopei, XU Hui, ZHANG Chi
    DOI: 10.11973/jxgccl250052
    Abstract PDF
    Microstructure and Properties of Laser-Cladded FeCoNiCrMnNdx High-Entropy Alloy Coating
    FANG Jie, XU Jianwei, WANG Wenjie, LYU Peng, LIU Shibin
    DOI: 10.11973/jxgccl250491
    Abstract PDF
    Effect of Final Annealing Temperature on Microstructure and Corrosion Resistance of Zr-Sn-Nb Alloy Cladding Tubes
    WU Zongpei, QIU Jun, YANG Zhongbo, XU Jianjun, ZHAO Yongfu
    DOI: 10.11973/jxgccl250581
    Abstract PDF
    Effect of Cold Deformation on Stress Corrosion Behavior of 316LN Stainless Steel in Simulated Pressurized Water Reactor Primary Circuit Water
    ZHANG Litao, WANG Jianqiu
    DOI: 10.11973/jxgccl250573
    Abstract PDF
    Application and Research Status of Inorganic High-Temperature Thermally Conductive Coatings for Heat Pipe Reactors
    QUBI Ciluo, LI Rongbo, XIA Shuan, BA Fahai, JIANG Jiaxuan, QIAO Jiaxi, GONG Yi
    DOI: 10.11973/jxgccl250590
    Abstract PDF
    Research Status on Flow-Accelerated Corrosion in the Secondary Circuit Carbon Steel Piping of Nuclear Power Plants
    CHEN Kai, YOU Yuling, ZHOU Qiyin, BAO Yichen, LI Ling, WANG Hongchang, LIU Xiaoqiang, MENG Fanjiang, WANG Xujia, ZHANG Lefu
    DOI: 10.11973/jxgccl250578
    Abstract PDF
    Research Progress on Corrosion Product Deposition Behavior on Pressurized Water Reactor Fuel Cladding
    CHEN Kai, ZHOU Fujie, XIA Tianxing, HUANG Tao, ZHANG Lefu
    DOI: 10.11973/jxgccl250511
    Abstract PDF
    Internal Pressure Burst Fracture Mechanism of a New Zirconium Alloy Cladding Tube
    HE Yong, LIAO Jingjing, XU Jiangtao, HONG Xiaofeng, YANG Zhongbo
    DOI: 10.11973/jxgccl250441
    Abstract PDF
    Research Progress on Oxidation Corrosion of Sodium Heat Pipes in High-Temperature Service Environments
    CHEN Haohan, JIANG Wentian, HUANG Qingyang, LIU Zihao, FU Chao, GAI Xin, DING Tao
    DOI: 10.11973/jxgccl250540
    Abstract PDF
    Microstructure Evolution and Property of Inconel 690 Alloy Under Temporal Matching of Magnetic-Thermal Energy Fields
    LI Junhui, HUANG Liang, MAO Wenjie, WANG Shengze, WANG Rui, HE Shiyu, MEI Jinna, CAI Zhen
    DOI: 10.11973/jxgccl250593
    Abstract PDF
    Numerical Simulation of Welding Residual Stress in Butt Multi-Pass Welded Steel Plate
    WANG Yanxiang, LI Yuanrui, JIAO Yang, WANG Xiaopeng, ZHANG Genhua, LIU Haishun
    DOI: 10.11973/jxgccl250203
    Abstract PDF
    Yield Strength Prediction of NbTaW-Based High-Entropy Alloys by Machine Learning
    YAN Huanqi, DENG Dunying, WEN Hanqing, TONG Yonggang
    DOI: 10.11973/jxgccl250048
    Abstract PDF
    Effect of Grinding Rotation Speed on Material Removal Behavior of U75V Steel Rail Welded Joint
    LIU Xuemin, LIU Yi, WANG Shixin, YOU Jinhong, ZHANG Wulin, CHENG Yu
    DOI: 10.11973/jxgccl240558
    Abstract PDF
    Corrosion Behavior of Different Steels for Sulfuric Acid Alkylation System in Ammonium Sulfate Solution
    ZHANG Song, OU Guofu, ZHAO Yupei
    DOI: 10.11973/jxgccl250027
    Abstract PDF
    Tensile Strength Testing of Ultra-Thin Sheets Based on Small Punch Test
    WANG Haibo, SUN Haisheng, MA Yiming, LI Chang, GUAN Kaishu, HAO Kaikai, QI Xing
    DOI: 10.11973/jxgccl250065
    Abstract PDF
    Fluid-Elastic Instability of Heat-Transfer Tubes with Small Mass Damping Parameters in Two-Phase Flow Environment
    HAN Peize, MA Penghui, CHEN Zhengqiao, TAN Wei, ZHU Guorui
    DOI: 10.11973/jxgccl240374
    Abstract PDF
    Influence of Tool Convex Hull Structure on Cold Expansion Strengthening Effect of Non-Round Holes
    CHEN Jiasheng, LEI Xuelin, WANG Jiachen, ZHU Defu, TIAN Yongjun, CHENG Lyuyi, ZHANG Xiancheng
    DOI: 10.11973/jxgccl250067
    Abstract PDF
    Effect of Annealing Process on Intrinsic Point Defects and Electrical Properties of ZnO Varistor Ceramics
    YUE Yinghu, ZHAO Hongfeng, LIU Wei
    DOI: 10.11973/jxgccl250050
    Abstract PDF
    Impact-Resistant Metamaterials Design: Synergistic Innovation of Machine Learning and Additive Manufacturing
    FENG Zhixia, ZHANG Liang, WU Wenheng, ZHANG Jianfeng
    2026, 50(2): 1-10. DOI: 10.11973/jxgccl250208
    Abstract PDF
    Tribological Properties of Cashew Nut Shell Liquid Modified Phenolic Resin Matrix Composites Synergistically Reinforced with SiC and ZnO Particles
    MA Xun, WU Jisi, ZHOU Zhe, LI Man, LI Zhi
    2026, 50(2): 11-18, 26. DOI: 10.11973/jxgccl240619
    Abstract PDF
    Effect of La Addition Amounts on Microstructure Refinement and Properties of Al-9Si-1Fe Alloy
    JU Jianglan, ZHANG Ziqi, WANG Chengjie, LI Qinglin
    2026, 50(2): 19-26. DOI: 10.11973/jxgccl250245
    Abstract PDF
    Influence of WC Content on Microstructure and Properties of WC/15-5PH Stainless Steel Composite Coating by Laser Cladding
    WANG Zhiqiang, WU Hui, ZHAO Hanqing
    2026, 50(2): 27-35. DOI: 10.11973/jxgccl250505
    Abstract PDF
    High-Temperature Compressive Properties and Deformation Mechanisms of Hot-Pressing Sintered Nb-23Ti-15Al Ultra-high Temperature Alloy
    SHI Zhiwu, WANG Lei, YAN Fubin, LI Yulong, DAI Rongze, ZHANG Hongyu, ZHENG Qi
    2026, 50(2): 36-41, 60. DOI: 10.11973/jxgccl250187
    Abstract PDF
    Effect of Scanning Speed on Microstructure and Mechanical Properties of GH4169 Alloy Formed by Selective Laser Melting
    CAI Zhenqing, XIE Zhihao, ZHANG Qin, YANG Ling, LIU Lulu, CHEN Wei
    2026, 50(2): 42-48. DOI: 10.11973/jxgccl240532
    Abstract PDF
    Preparation and Performance of Shear-Thinning Organogel Based Magnetorheological Fluid
    ZHANG Hansong, HU Zhide, JIANG Haoyang, CHEN Xiaoyun, XU Chunxia, LI Zhixia
    2026, 50(2): 49-54. DOI: 10.11973/jxgccl250011
    Abstract PDF
    Comparison of Friction and Wear Properties of SiCP/6092 Aluminum Alloy Composite with 45% Volume Fraction SiC Against Different Counterparts
    WANG Dongliang, MA Furong, YIN Wenwei, ZHANG Jilin
    2026, 50(2): 55-60. DOI: 10.11973/jxgccl250174
    Abstract PDF
    Effect of Temperature on Friction and Wear Behavior of 24CrNiMo Steel for High-Speed Train Brake Discs
    FENG Gangzhen, KANG Hao, LIU Ning, JIA Yubo
    2026, 50(2): 61-65. DOI: 10.11973/jxgccl250003
    Abstract PDF
    Effect of Aluminum Addition Amount on Microstructure and Impact-Abrasion Resistance of ZGMn18Cr2 Lightweight High-Manganese Steel
    YANG Yi, ZHENG Zhibin, LONG Jun, LU Wei, CHEN Zhiqiang, HU Xidong, CHEN Shengqian
    2026, 50(2): 66-72. DOI: 10.11973/jxgccl250248
    Abstract PDF
    Effect of Surface Mechanical Rolling on Microstructure and Wear Resistance of 7075 Aluminum Alloy
    LIAN Junmao, HUANG Liangshun, CHEN Junyuan, HUANG Xuqi, ZHANG Changqing, HUANG Hai
    2026, 50(2): 73-79, 98. DOI: 10.11973/jxgccl250226
    Abstract PDF
    Effect of Solidification Cooling Rate on Microstructure and Element Segregation Behavior of Cu-9Ni-6Sn alloy
    LI Huiling, CHEN Chen, WEI Yafeng, JIA Fei
    2026, 50(2): 80-86. DOI: 10.11973/jxgccl250479
    Abstract PDF
    Corrosion Behavior of Chrome-Plated 30CrMnSiNi2A Ultra-high Strength Steel Piston Rod in SO2/Salt Spray Combined Environment
    YAN Fuhua, DONG Boxing, WANG Hai, XU Jiaxin, ZHAN Shaohui
    2026, 50(2): 87-93. DOI: 10.11973/jxgccl250242
    Abstract PDF
    Influence of Different Doping Amounts of Ni2O3 on Alternating Current Aging Characteristics of ZnO Varistor
    DENG Tao, XIE Shijun, HE Yu, ZHAO Xinghong, CHEN Zhengxiong, CHENG Xin, MENG Pengfei
    2026, 50(2): 94-98. DOI: 10.11973/jxgccl250237
    Abstract PDF
    Simulation Analysis of Temperature Field During Vacuum Brazing for Plate-Fin Aluminum Alloy Heat Sink
    WANG Hongqiao, FAN Yuhao, YAN Chongjing, WU Yong
    2026, 50(2): 99-105. DOI: 10.11973/jxgccl250198
    Abstract PDF
    Numerical Simulation of Failure Behavior of B1500HS Hot-Stamped Steel Spot Weld
    ZHANG Tianyang, ZHANG Jichao
    2026, 50(2): 106-112. DOI: 10.11973/jxgccl240524
    Abstract PDF
    Simulation of Welding Residual Stress Evolution of SAF2205 Duplex Steel Cruciform Joints During Fatigue Process by Different Models
    ZHANG Yiting, XIE Xuefang, DONG Zhilong, LI Shaohua, WANG Shengkun, WAN Yu
    2026, 50(2): 113-119. DOI: 10.11973/jxgccl240499
    Abstract PDF
    Fracture Causes of 38CrMoAl Nitriding Steel Valve Stem in a Thermal Power Plant
    PENG Bo, WANG Zhichun, WANG Jianguo, LI Xiaojie, SONG Zibo
    2026, 50(2): 120-126. DOI: 10.11973/jxgccl250192
    Abstract PDF