Advanced Search

    Online First

    Articles in press have been peer-reviewed and accepted, which are not yet assigned to volumes/issues, but are citable by Digital Object Identifier (DOI).
    Effect of Continuous Casting Soft Reduction Amount on Segregation and Properties of 55SiCr Spring Steel
    XING Chunqiao, ZHAO Luliang, DING Shengli, YAO Zan
    DOI: 10.11973/jxgccl250463
    Abstract PDF
    Transmission Laser Welding Process and Joint Performance of PEEK Sheet
    LI Qinglin, XIA Zhidong, LU Wei, WANG Yutong, LIN Jian, ZHAI Enxiao
    DOI: 10.11973/jxgccl250465
    Abstract PDF
    Microstructure and Sodium Storage Performance of Biomass-Derived Hard Carbon Materials
    CHENG Xiangzhong, YANG Wei, SUN Baiyang, WU You, YANG Bin, YANG Chunzhen
    DOI: 10.11973/jxgccl250393
    Abstract PDF
    Effect of Sulfate-Reducing Bacteria and Iron Bacteria on Corrosion Behavior of Ductile Iron for Reclaimed Water Pipes
    LONG Yuxuan, LI Wei, BO Guowei, LIU Dashuang, CHEN Jian
    DOI: 10.11973/jxgccl250418
    Abstract PDF
    Multiphase Flow Numerical Simulation of Zinc Vapor Pore Formation In Galvanized Steel Welding and Influence Mechanism of Welding Parameters
    PANG Liehui, ZHANG Chaofeng, LI Jiahao, WANG Shuangli, SUN Shoule, JIAO Zonghang
    DOI: 10.11973/jxgccl250394
    Abstract PDF
    Preparation and Etching Properties of Ternary Layered Ceramic Cr2AlB2
    ZHOU Yaxuan, CHEN Haoyu, DENG Yuxiao, YAN Zhuanlong, LIU Ya, YAN Ming
    DOI: 10.11973/jxgccl250396
    Abstract PDF
    Preparation and Molten Salt Corrosion Behavior of Y2O3 Ceramic Coating on Yttrium Metal Surface
    CHEN Gang, LYU Xuming, SHI Long, WEI Dongbo, ZHANG Pingze
    DOI: 10.11973/jxgccl250492
    Abstract PDF
    Solidification Structure and Macroscopic Uniformity of Second Phase Particles in ODS Nickel-based Alloy by Oxygen Carrier Casting Method
    HAO Long, ZHANG Xiaoxin, MA Yanwei, ZHANG Yifan, LI Junwei, LI Xia, YU Jianbo, XUAN Weidong, REN Zhongming
    DOI: 10.11973/jxgccl250309
    Abstract PDF
    Friction and Wear Performance of 45 Steel/TiC Particle-Reinforced Iron-based Lamellar Composites
    QI Suixiang, BAI Haiqiang, WANG Haitao, WANG Weidong, XIAN Linyun, LI Hongbin
    DOI: 10.11973/jxgccl250268
    Abstract PDF
    Industrial Trial Production and Oxidation Resistance of Si-Cr Microalloyed Hot-Forming Steel
    ZHOU Xianchao, XIONG Xuegang, ZHENG Haoqing, LI Zhengrong, LIU Xing, CHEN Shu, CUI Kaiyu
    DOI: 10.11973/jxgccl250281
    Abstract PDF
    Forming Process Optimization and Mechanical Properties of Bronze/Steel and Steel/Bronze Composite Thin Walls Fabricated by Cold Metal Transfer Arc Additive Manufacturing
    LI Deyini, XU Yulang, ZHANG Cheng, ZHAO Xianrui, LI Zhanjiang, ZHANG Qiangyong, XIAO Dengguang
    DOI: 10.11973/jxgccl250298
    Abstract PDF
    Optimization of Ultrasonic Rolling Process Parameters Based on PSO-BP Neural Network and NSGA-II Algorithm
    LAN Yeshen, RAO Chuchu, CHEN Chao, LYU Yunpeng
    DOI: 10.11973/jxgccl250462
    Abstract PDF
    Microstructure and Wear Resistance of Ni62F Alloy Flux-Cored Wire Surfacing Layer with Different Iron and Chromium Contents
    WU Bin, ZHUANG Lijun, YANG Hao, WU Jing, PAN Fengbo, AN Bingzhou
    DOI: 10.11973/jxgccl250449
    Abstract PDF
    Effect of Rare Earth La on Microstructure and Mechanical Properties of Fe-Ni-Al Maraging Steel During Isothermal Aging
    YAO Ke, WANG Haiyan, ZHOU Tong, GAO Xueyun, XUE Chunjiang, HAN Yan, ZHANG Renyun
    DOI: 10.11973/jxgccl250445
    Abstract PDF
    Friction and Wear Properties of M2 Steel Composites Synergistically Reinforced with Micro-TiCN and Nano-ZrO2
    ZHOU Zhenyu, HUANG Shiqiang, OU Changjie, ZOU Xinchang, LIU Kang
    DOI: 10.11973/jxgccl250448
    Abstract PDF
    Dynamic Deformation Behavior of UF340 Novel Steel for Automotive Outer Panels
    ZHANG Junping, FANG Gang, ZHOU Jia, ZHOU Zhansong, NIU Liqiang, LI Xiaoyu, LU Hongzhou, JIN Lei, GUAN Jiandong, GUO Aiming
    DOI: 10.11973/jxgccl250424
    Abstract PDF
    Effect of Nb Content on Microstructure and Properties of SA516Gr70 Steel for Pressure Vessel
    SHAO Chunjuan, ZHEN Fan, QU Jinbo, WU Fengjuan
    DOI: 10.11973/jxgccl250284
    Abstract PDF
    High-Temperature Low-Cycle Fatigue Properties of Inconel 617 Alloy at 700 °C
    WU Jun, ZHENG Yexun, LI Bingbing, CHEN Xu, LIU Yuanwen
    DOI: 10.11973/jxgccl250267
    Abstract PDF
    Influence of Ultrasonic Assistance on Microstructure and Tensile Properties of Friction Stir Welded Joints of 2A12/7075 Dissimilar Aluminum Alloys
    WANG Yongqi, WANG Pengyu, BAI Zhihao, ZHANG Yu, ZHOU Dongshuai, WANG Jian
    DOI: 10.11973/jxgccl250421
    Abstract PDF
    Effect of Different Nitride Additions on Microstructure and Mechanical Properties of As-extruded AZ61 Magnesium Alloy
    QIU Wei, YANG Lingfei, CHEN Wei, ZHANG Senmao, LI Cong, CHEN Jian
    DOI: 10.11973/jxgccl250275
    Abstract PDF
    Comparison of Microstructure and Properties of Domestic and Imported T10 Steel Valve Plates
    WU Zhaopeng, TANG Ling, YUAN Xingdong, FU Mingming, JI Yunping, ZHANG Yongsheng, LI Yiming
    DOI: 10.11973/jxgccl250263
    Abstract PDF
    Effects of Intermediate Annealing on Microstructure and Properties of Cu-1.0Ag Alloy with High Strength and High Conductivity
    LI Yongdi, WU Zhenyu, PAN Kai, ZHANG Pengpeng, WEI Yi, LU Tairong
    DOI: 10.11973/jxgccl250255
    Abstract PDF
    Optimization of Heat Treatment Process for 65Mn Tool Steel
    YANG Fanrong, LI Wen, CONG Yuan, WANG Tong, CHEN Liupeng, PEI Xinhua, MAO Xiangyang
    DOI: 10.11973/jxgccl250257
    Abstract PDF
    Microstructure and Sliding Friction and Wear Properties of Hardfacing Layer of High Chromium Bimetallic Wear-Resistant Plate
    LIU Tianjun, LI Xintong, WANG Qingliang
    DOI: 10.11973/jxgccl250250
    Abstract PDF
    Effect of Heat Treatment on Properties of SiCp/Al-Mg-Si-Cu Alloy Composites
    SHI Yuanji, RIZIWANGULI, LI Fangjie, ZHAN Yihui, CHEN Zeyu, ZHOU Xie, YAN Xiangyang, TANG Renhao
    DOI: 10.11973/jxgccl250066
    Abstract PDF
    High Temperature Austenitic Deformation Behavior of X80 Pipeline Steel
    WU Xiaolong, ZHOU Yuqing, YANG Yuhou, WANG Jiaojiao, HOU Wei, ZHAO Linlin, WANG Zhuo, SONG Honglong
    DOI: 10.11973/jxgccl250232
    Abstract PDF
    Life Proportion Laws of Creep Crack Initiation and Propagation of FGH96 Alloy
    FU Zehuan, ZHAO Xinyuan, ZHENG Dong, ZHUANG Shuying, ZHAO Xinyu, HU Xuteng
    DOI: 10.11973/jxgccl250223
    Abstract PDF
    Influencing Factors and Mechanism of Impact Toughness of G115 Steel Joint Welded by CHW-SG115 Wire Submerged Arc Welding
    HUO Xilong, CAO Rui, LONG Haixiao, JIA Xingwang, YANG Fei, XU Xiaolong, LIAO Jianrong
    DOI: 10.11973/jxgccl250168
    Abstract PDF
    Microstructure and Properties of Traditional and Rapid Cooling Friction Stir Welded Joints of High Strength Automotive Steel
    QIU Kai, ZHANG Lu
    DOI: 10.11973/jxgccl250308
    Abstract PDF
    Low Cycle Fatigue Properties of Laser Selective Melting Ti-6Al-4V alloy after direct aging treatment
    GONG Lichao, YAO Zhenhua, LIN Zhixiong, XIE Yunqi, HANG Song, CHEN Hailong
    DOI: 10.11973/jxgccl250169
    Abstract PDF
    Abrasive Design and Material Removal Performance of Aluminum Chemical Mechanical Polishing
    YIN Chao, ZHANG Ronghua, WAN Junxi, XIE Wenjun, HU Xiaokai
    DOI: 10.11973/jxgccl250345
    Abstract PDF
    Life Analysis of Nickel-base Single Crystal Alloy Porous Plates under High Temperature Creep-Fatigue Interaction
    XIANG Shouliang, SHI Duoqi, LI Nina, ZHAO Ya, ZHU Kangjie, YANG Xiaoguang
    DOI: 10.11973/jxgccl250324
    Abstract PDF
    Microstructure and Mechanical Properties of GTD-111 Superalloy First-Stage Turbine Blade Repaired by Laser Welding
    SHANGGUAN Xingang, WANG Guang, SUN Yasong, HAO Chen, LIU Wenbo
    DOI: 10.11973/jxgccl250350
    Abstract PDF
    Evaluation of High Strain Rate Sensitivity in Single Crystal Aluminum via Laser Induced Projectile Impact
    YOU Yulin, CHEN Jiayu, LUO Guohu, HU Yongxiang
    DOI: 10.11973/jxgccl250148
    Abstract PDF
    Effects of Argon Shielding Condition on Surface Microstructure and Phase of Weld of 316L Stainless Steel Pipe
    DENG Shen, CHEN Genbao, ZHU Xiongming, YAO Liang, TANG Mingqi, ZHANG Qingke, SONG Zhenlun
    DOI: 10.11973/jxgccl250332
    Abstract PDF
    Effect of rolling rate on microstructure, mechanical properties and damping properties of Mg-0.5% Al alloy
    HAN Qianyue, SUN Youping, HE Jiangmei, LU Yuwei, ZHANG Kaifei
    DOI: 10.11973/jxgccl250338
    Abstract PDF
    Superplasticity and Its Stability of Rolled TC4 Titanium Alloy Thick Plates for Deep-Sea Application
    QIU Yu, LU Zichuan, YANG Jianhui, WU Yong
    DOI: 10.11973/jxgccl250262
    Abstract PDF
    Microstructure Evolution and Mechanical Properties of a Ni-Cr-Al Superalloy During Aging
    LI Ang, WANG Mingyang, TAN Yi, LI Pengting
    DOI: 10.11973/jxgccl250179
    Abstract PDF
    Microstructure and Properties of Laser-Cladded FeCoNiCrMnNdx High-Entropy Alloy Coating
    FANG Jie, XU Jianwei, WANG Wenjie, LYU Peng, LIU Shibin
    DOI: 10.11973/jxgccl250491
    Abstract PDF
    Numerical Simulation of Welding Residual Stress in Butt Multi-Pass Welded Steel Plate
    WANG Yanxiang, LI Yuanrui, JIAO Yang, WANG Xiaopeng, ZHANG Genhua, LIU Haishun
    DOI: 10.11973/jxgccl250203
    Abstract PDF
    Fluid-Elastic Instability of Heat-Transfer Tubes with Small Mass Damping Parameters in Two-Phase Flow Environment
    HAN Peize, MA Penghui, CHEN Zhengqiao, TAN Wei, ZHU Guorui
    DOI: 10.11973/jxgccl240374
    Abstract PDF