高级检索
    平琳, 王志成. PSR/E51/BC共混体系弹性磨具的性能[J]. 机械工程材料, 2006, 30(3): 38-40.
    引用本文: 平琳, 王志成. PSR/E51/BC共混体系弹性磨具的性能[J]. 机械工程材料, 2006, 30(3): 38-40.
    shu
    PING Lin, WANG Zhi-cheng. Elastic Abrasive Performance for Alloying System of Polysulfide Rubber/Epoxy Resin/Brown Corundum[J]. Materials and Mechanical Engineering, 2006, 30(3): 38-40.
    Citation: PING Lin, WANG Zhi-cheng. Elastic Abrasive Performance for Alloying System of Polysulfide Rubber/Epoxy Resin/Brown Corundum[J]. Materials and Mechanical Engineering, 2006, 30(3): 38-40.
    shu

    PSR/E51/BC共混体系弹性磨具的性能

    Elastic Abrasive Performance for Alloying System of Polysulfide Rubber/Epoxy Resin/Brown Corundum

      摘要
    • 摘要: 研究了PSR(聚硫橡胶)/E51(环氧树酯)/BC(棕刚玉)三元共混体系的网络互穿和环氧树脂与棕刚玉的加入量对45钢磨光表面粗糙度的影响.试验表明：连续的网络结构对金属表面粗糙度的影响极大,采用E51和BC控制三元共混体系的硬度在90HRA时,弹性磨具对金属的磨光表面粗糙度值可达到0.8μm.

       

      Abstract: The network interpenetrating of ternary alloying system of PSR(polysulfide rubber)/E51(epoxy resin)/BC(brown corundum) and its high accuracy wearing mechanism against metal were studied.The polishing coarseness of elastic abrasive tools to metal could reach Ra=0.8μm.

       

      • HTML全文
      • 参考文献(5)
      • 相关文章
      • 施引文献
    • 资源附件(0)

    /

    返回文章
    返回