高级检索
    吕仁江, 张福祥, 李英杰, 侯学功. 阳极氧化铝模板合成介孔ZrO2纳米线及其光致发光性能[J]. 机械工程材料, 2013, 37(10): 83-86.
    引用本文: 吕仁江, 张福祥, 李英杰, 侯学功. 阳极氧化铝模板合成介孔ZrO2纳米线及其光致发光性能[J]. 机械工程材料, 2013, 37(10): 83-86.
    shu
    Lv Ren-jiang, ZHANG Fu-xiang, LI Ying-jie, HOU Xue-gong. Mesoporous ZrO2 Nanowire Synthesis by Anodic Alumina Template and Its Photoluminescence Property[J]. Materials and Mechanical Engineering, 2013, 37(10): 83-86.
    Citation: Lv Ren-jiang, ZHANG Fu-xiang, LI Ying-jie, HOU Xue-gong. Mesoporous ZrO2 Nanowire Synthesis by Anodic Alumina Template and Its Photoluminescence Property[J]. Materials and Mechanical Engineering, 2013, 37(10): 83-86.
    shu

    阳极氧化铝模板合成介孔ZrO2纳米线及其光致发光性能

    Mesoporous ZrO2 Nanowire Synthesis by Anodic Alumina Template and Its Photoluminescence Property

      摘要
    • 摘要: 以P123为致孔剂, 氧氯化锆为锆源, 无水乙醇为溶剂合成前驱体, 采用压力诱导的方法将前驱体注入到阳极氧化铝(AAO)模板的纳米孔道内, 经加热处理后, 在模板的纳米孔道内合成了具有介孔结构的一维ZrO2纳米材料; 并用SEM、TEM、XRD、EDS和氮气吸附-脱附等方法对ZrO2进行了表征。结果表明: 所合成的ZrO2 纳米线直径约为60 nm, 各纳米线单元由分布均一、孔径约为8 nm的介孔结构构成, 比表面积为121.6 m2·g-1, 并且具有良好的光致发光性能。

       

      Abstract: The precursor was prepared using P123 as porogen, ZrOCl as zirconium source and ethanol as solvent, then assembled into nano-channels of anodic aluminum oxide (AAO) templates by vacuuming and pressure-induced technology. After heat treatment, one-dimensional ZrO2 nanomaterials with mesoporous structure were fabricated within the nano-holes of AAO templates. The obtained samples were characterized in detail by SEM, TEM, XRD, EDS and N2 sorption and desorption. The results show that the synthesized ZrO2 nanowires were 60 nm in diameter, 121.6 m2·g-1 in specific surface area, had a homogeneously distributed mesoporous structure with pore diameter of 8 nm, and owned good photoluminescence property.

       

      • HTML全文
      • 参考文献(14)
      • 相关文章
      • 施引文献
    • 资源附件(0)

    /

    返回文章
    返回