高级检索
    董春明, 张红梅, 刘振宇, 王国栋. 终轧温度对热轧双相钢微观形貌的影响[J]. 机械工程材料, 2007, 31(3): 17-19.
    引用本文: 董春明, 张红梅, 刘振宇, 王国栋. 终轧温度对热轧双相钢微观形貌的影响[J]. 机械工程材料, 2007, 31(3): 17-19.
    DONG Chun-ming, ZHANG Hong-mei, LIU Zhen-yu, WANG Guo-dong. Effect of Finishing Temperature on Microstructure of Hot Rolled Dual-phase Steel[J]. Materials and Mechanical Engineering, 2007, 31(3): 17-19.
    Citation: DONG Chun-ming, ZHANG Hong-mei, LIU Zhen-yu, WANG Guo-dong. Effect of Finishing Temperature on Microstructure of Hot Rolled Dual-phase Steel[J]. Materials and Mechanical Engineering, 2007, 31(3): 17-19.

    终轧温度对热轧双相钢微观形貌的影响

    Effect of Finishing Temperature on Microstructure of Hot Rolled Dual-phase Steel

    • 摘要: 利用实验室轧机、光学显微镜、透射电镜等研究了终轧温度对高强热轧双相钢微观形貌的影响.结果表明:得到的双相钢的显微组织主要是纤维状双相混合型组织;随终轧温度的降低,过冷度加大,铁素体的形核驱动力加大,形核率增加,使晶粒明显细化.

       

      Abstract: The effect of the finishing temperature on the microstructure of hot rolled dual-phase steel was studied by means of OM,TEM at laboratory rolling mill.The microstructure of fiber mixed dual-phase could be obtained.The results show microstructure was refined and the degree of under-cooling increased,nucleation driving force was improved,nucleation rate increased with the decreasing of the finishing temperature.

       

    /

    返回文章
    返回