高级检索
    王习术, 汤彬, 陶沙. 铸造镁铝合金的微观破坏机理原位观测技术与应用[J]. 机械工程材料, 2006, 30(2): 1-5.
    引用本文: 王习术, 汤彬, 陶沙. 铸造镁铝合金的微观破坏机理原位观测技术与应用[J]. 机械工程材料, 2006, 30(2): 1-5.
    shu
    WANG Xi-shu, TANG Bin, TAO Sha. In-situ Observation Technology and Application of Fatigue Crack Initiation and Propagation for Cast Magnesium Alloys[J]. Materials and Mechanical Engineering, 2006, 30(2): 1-5.
    Citation: WANG Xi-shu, TANG Bin, TAO Sha. In-situ Observation Technology and Application of Fatigue Crack Initiation and Propagation for Cast Magnesium Alloys[J]. Materials and Mechanical Engineering, 2006, 30(2): 1-5.
    shu

    铸造镁铝合金的微观破坏机理原位观测技术与应用

    In-situ Observation Technology and Application of Fatigue Crack Initiation and Propagation for Cast Magnesium Alloys

      摘要
    • 摘要: 通过SEM原位观测方法试验研究了铸造镁铝系列合金的微观破坏机理,得到了α-Mg颗粒大小、形状、β(Mg17Al12)相分布对破坏机理的贡献与微结构的改性对其强度韧度的影响.结果表明:微裂纹主要萌生于晶界并沿界面扩展,其中由于铸造镁铝合金的“准脆性”,疲劳裂纹稳态扩展范围在微米量级,疲劳裂纹扩展平面微观尺度下与外力方向不完全垂直,裂纹扩展机理表现为Mode Ⅰ+ Mode Ⅱ的耦合结果.因此,线性破坏力学中的应力强度因子ΔK不能有效地评价铸造镁铝合金的疲劳扩展.

       

      Abstract: The micro-fracture mechanism of cast magnesium alloys was investigated based on in-situ observation with scanning electron microscope (SEM).The effects of the α-Mg grain size and shape as well as the β phases (Mg17Al12) distribution on the fatigue crack initiation and propagation,and effect of the addition of Ca to magnesium alloy on the mechanical properties were examined.The fatigue cracks mainly initiated and propagated at the α-Mg boundaries.These cracks stably propagated in a scale of micrometers and did not absolutely propagate perpendicularly to the maximal principal stress direction.The fatigue crack propagating mechanism was dependant on the coupling of mode I and mode Ⅱ.Therefore,the stress intensity factor ΔK was not suitable for estimating the fatigue crack growth rate in microscope.

       

      • HTML全文
      • 参考文献(19)
      • 相关文章
      • 施引文献
    • 资源附件(0)

    /

    返回文章
    返回