高级检索
    徐建华, 涂杰松, 王鼎, 孙华亮, 吴仪敏, 段海涛, 李健. 一种评价可转位涂层刀片切削加工性能的方法[J]. 机械工程材料, 2013, 37(6): 78-83.
    引用本文: 徐建华, 涂杰松, 王鼎, 孙华亮, 吴仪敏, 段海涛, 李健. 一种评价可转位涂层刀片切削加工性能的方法[J]. 机械工程材料, 2013, 37(6): 78-83.
    shu
    XU Jian-hua, TU Jie-song, WANG Ding, SUN Hua-liang, WU Yi-min, DUAN Hai-tao, LI Jian. An Approach to Evaluating Cutting Performance of Indexable Coating Tools[J]. Materials and Mechanical Engineering, 2013, 37(6): 78-83.
    Citation: XU Jian-hua, TU Jie-song, WANG Ding, SUN Hua-liang, WU Yi-min, DUAN Hai-tao, LI Jian. An Approach to Evaluating Cutting Performance of Indexable Coating Tools[J]. Materials and Mechanical Engineering, 2013, 37(6): 78-83.
    shu

    一种评价可转位涂层刀片切削加工性能的方法

    An Approach to Evaluating Cutting Performance of Indexable Coating Tools

      摘要
    • 摘要: 尝试用自主设计的可转位涂层刀片(下简称涂层刀片)夹具, 使涂层刀片固定于UMT-2型摩擦磨损试验机上, 通过摩擦磨损试验模拟涂层刀片车削加工过程, 评价了TiAlSiN和TiAlCrN/TiAlN、刀尖圆弧半径0.4 mm和0.8 mm涂层刀片的切削加工性能。结果表明: 采用以上方法可有效评价涂层刀片的切削加工性能。

       

      Abstract: An indexable coating tool clamping fixture fixing the tools on the fiction and wear test machine UMT-2 was designed. The process of lathe tool cutting was simulated by fiction and wear test to evaluate the cutting performance of coating tools with coating TiAlSiN and TiAlCrN/TiAlN, tools corner radius of 0.4 mm and 0.8 mm. The results revealed that the cutting performance of coating tools could be evaluated efficiently using above approach.

       

      • HTML全文
      • 参考文献(14)
      • 相关文章
      • 施引文献
    • 资源附件(0)

    /

    返回文章
    返回