高级检索
    颜建辉, 杨艳, 张厚安. 自蔓延原位合成TiC/MoSi2复合材料及其力学性能[J]. 机械工程材料, 2008, 32(10): 10-13.
    引用本文: 颜建辉, 杨艳, 张厚安. 自蔓延原位合成TiC/MoSi2复合材料及其力学性能[J]. 机械工程材料, 2008, 32(10): 10-13.
    shu
    YAN Jian-hui, YANG Yan, ZHANG Hou-an. Mechanical Properties of TiC/MoSi2 Composites Prepared by Self-propagating In-situ Synthesis[J]. Materials and Mechanical Engineering, 2008, 32(10): 10-13.
    Citation: YAN Jian-hui, YANG Yan, ZHANG Hou-an. Mechanical Properties of TiC/MoSi2 Composites Prepared by Self-propagating In-situ Synthesis[J]. Materials and Mechanical Engineering, 2008, 32(10): 10-13.
    shu

    自蔓延原位合成TiC/MoSi2复合材料及其力学性能

    Mechanical Properties of TiC/MoSi2 Composites Prepared by Self-propagating In-situ Synthesis

      摘要
    • 摘要: 以钼、硅、钛和碳粉为原料,采用自蔓延原位合成技术制备了不同体积分数TiC强韧化的MoSi2基复合材料,研究了TiC颗粒对MoSi2基体材料显微组织和力学性能的影响.结果表明:TiC颗粒均匀分布于MoSi2基体中;TiC体积分数为30%时,TiC/MoSi2复合材料硬度、抗弯强度和断裂韧度分别达到15.02 GPa、366 MPa和6.26 MPa·m1/2,比纯MoSi2分别增加61.5%、26.8%和150%;复合材料的断口表现为沿晶断裂和准解理断裂的混合形式,其强化机制是细晶强化和弥散强化,韧化机制为细晶韧化.

       

      Abstract: TiC/MoSi2 composites with different volume fraction of TiC particles were fabricated by self-propagating high temperature synthesis (SHS) with Mo,Si,Ti and C powders as raw materials.Effects of TiC particles on microstructure and mechanical properties of MoSi2 matrix were investigated.The results indicated that TiC particles were uniformly distributed in MoSi2 matrix.The hardness,flexure strength and fracture toughness of 30% TiC/MoSi2 composite reached 15.02 GPa,366 MPa and 6.26 MPa·m1/2 and increased 61.5%,26.8% and 150% respectively compared with monolithic MoSi2.The fracture characteristic of the composites is cleavage and intergranular.The strengthening mechanisms of the composites are grain refinement and dispersion strengthening,while the toughening mechanism is grain refinement toughening.

       

      • HTML全文
      • 参考文献(19)
      • 相关文章
      • 施引文献
    • 资源附件(0)

    /

    返回文章
    返回