Page 28 - 机械工程材料2024年第十一期
P. 28
龚 芹，等：高温下碳纤维复合材料动态力学性能及相关失效准则的研究进展
behavior of 2D-C/SiC composites at elevated ［54］ HOFFMAN O. The brittle strength of orthotropic
temperatures：Experiment and modeling［J］. Journal of materials［J］. Journal of Composite Materials，1967，1（2）：
the European Ceramic Society，2017，37（4）：1281-1290. 200-206.
［43］ WEN J J，WU Y，HOU X，et al. Effect of high ［55］ TSAI S W，WU E M. A general theory of strength
temperature on mechanical properties and porosity of for anisotropic materials［J］. Journal of Composite
carbon fiber/epoxy composites［J］. Journal of Reinforced Materials，1971，5（1）：58-80.
Plastics and Composites，2023，42（19/20）：990-1005. ［56］ LI S G，XU M M，SITNIKOVA E. The formulation of
［44］ TANAKA K，HOSOO N，KATAYAMA T，et al. the quadratic failure criterion for transversely isotropic
Effect of temperature on the fiber/matrix interfacial materials：Mathematical and logical considerations［J］.
strength of carbon fiber reinforced polyamide model Journal of Composites Science，2022，6（3）：82.
composites［J］. Mechanical Engineering Journal，2016， ［57］ HASHIN Z. Failure criteria for unidirectional fiber
3（6）：16-00158. composites［J］. Journal of Applied Mechanics，1980，47
［45］ TANAKA K，NISHIO J，KATAYAMA T，et al. （2）：329-334.
Effect of high temperature on fiber/matrix interfacial ［58］ PUCK A，SCHÜRMANN H. Failure analysis of FRP
properties for carbon fiber/polyphenylenesulfide model laminates by means of physically based phenomenological
composites［J］. Key Engineering Materials，2014，627： models［J］. Composites Science and Technology，2002，
173-176. 62（12/13）：1633-1662.
［46］ LI L B. Temperature-dependent proportional limit stress ［59］ PINHO S，VYAS G，ROBINSON P. Material and
of carbon fiber-reinforced silicon carbide ceramic-matrix structural response of polymer-matrix fibre-reinforced
composites［J］. Ceramics Silikáty，2019，63（3）：1-9. composites：Part B［J］. Journal of Composite Materials，
［47］ PANERAI F，COCHELL T，MARTIN A，et al. 2013，47（6/7）：679-696.
Experimental measurements of the high-temperature ［60］ DE LUCA A，DI CAPRIO F，MILELLA E，et al. On
oxidation of carbon fibers［J］. International Journal of the tensile behaviour of CF and CFRP materials under
Heat and Mass Transfer，2019，136：972-986. high strain rates［J］. Key Engineering Materials，2017，
［48］ MAHIEUX C A，REIFSNIDER K L. Property 754：111-114.
modeling across transition temperatures in polymers：A ［61］ COWPER G，SYMONDS P. Strain-hardening and
robust stiffness‒temperature model［J］. Polymer，2001， strain-rate effects in the impact loading of cantilever
42（7）：3281-3291. beams［R］. Providence：Brown University，1957
［49］ HAWILEH R A，ABU-OBEIDAH A，ABDALLA J ［62］ KARIM M. Constitutive modeling and failure criteria
A，et al. Temperature effect on the mechanical properties of carbon-fiber reinforced polymers under high strain
of carbon，glass and carbon‒glass FRP laminates［J］. rates［D］. Akron：University of Akron，2005.
Construction and Building Materials，2015，75：342-348. ［63］ 蒋邦海，张若棋. 动态压缩下一种碳纤维织物增强复合
［50］ SATO M，SHIRAI S，KOYANAGI J，et al. Numerical 材料的各向异性力学性能实验研究［J］. 复合材料学报，
simulation for strain rate and temperature dependence of 2005，22（2）：109-115.
transverse tensile failure of unidirectional carbon fiber- JIANG B H，ZHANG R Q. Dynamic compressive
reinforced plastics［J］. Journal of Composite Materials， mechanical properties of a carbon fiber woven reinforced
2019，53（28/29/30）：4305-4312. composite：Experimental study［J］. Acta Materiae
［51］ MAHIEUX C A，REIFSNIDER K L. Property Compositae Sinica，2005，22（2）：109-115.
modeling across transition temperatures in polymers： ［64］ 蒋邦海，张若棋. 一种碳纤维织物增强复合材料应变速
Application to thermoplastic systems［J］. Journal of 率相关的各向异性强度准则［J］. 爆炸与冲击，2006，
Materials Science，2002，37（5）：911-920. 26（4）：333-338.
［52］ MACHADO J J M，MARQUES E A S，CAMPILHO JIANG B H，ZHANG R Q. Strain rate-dependent Tsai-
R D S G，et al. Mode II fracture toughness of CFRP as Hill strength criteria for a carbon fiber woven reinforced
a function of temperature and strain rate［J］. Composites composite［J］. Explosion and Shock Waves，2006，26（4）：
Part B：Engineering，2017，114：311-318. 333-338.
［53］ ISAI S W. Strength characteristics of composite ［65］ 谈炳东，郑健，许进升，等. 短纤维增强三元乙丙薄膜
materials NASA/CR-22A［R］. Washington D. C.： 拉伸破坏率相关Tsai-Hill强度准则 ［J］. 复合材料学报，
NASA，1965. 2018，35（6）：1646-1651.
20
