Materials and Mechanical Engineering 2015 Vol. 39 No. 12

Electrochemical Properties of Nanocrystalline Al_0.3CoCrFeNi High-entropy Alloy in Alkaline Solution

TANG Qun-hua, DAI Pin-qiang, HUA Neng-bin

2015, 39(12): 1-4. DOI: 10.11973/jxgccl201512001

Abstract PDF

Influences of Process Parameters on Springback of 7075 Aluminum Alloy During Creep Age Forming

LIU Da-hai, XIE Yong-xin, LI Jun-chu, ZONG Chong-wen

2015, 39(12): 5-8. DOI: 10.11973/jxgccl201512002

Abstract PDF

Effect of Molybdenum Content on Microstructure and Properties of Fe-Cu-Mo-C Sintering Alloy

WANG Tian-guo, QIN Qun

2015, 39(12): 9-11. DOI: 10.11973/jxgccl201512003

Abstract PDF

Brittleness of 6.5wt% Si Silicon Steel Prepared by Chemical Vapor Deposition Method

GAO Chao, SU Fang-chen, XIANG Ying-jie, SUN Quan, CHEN Jian-jun

2015, 39(12): 12-16. DOI: 10.11973/jxgccl201512004

Abstract PDF

Microstructure and Wear Resistance of Ti17 Titanium Alloy after Surface Treatment with Composite Strengthening Process

WANG Shao-peng, QIAO Sheng-ru, ZHANG Cheng-yu

2015, 39(12): 17-21. DOI: 10.11973/jxgccl201512005

Abstract PDF

Oxidation and Decarbonization Behaviour of Bearing Steel Wire Rod Annealing under Different Protective Conditions

WANG Yu-fei, REN Feng-zhang, HUANG Sheng-cao

2015, 39(12): 22-24. DOI: 10.11973/jxgccl201512006

Abstract PDF

Tensile and Erosion-wear Properties of Composite Material for Wind Turbine Blade

DONG Xu-xu, LI Xin-mei, DONG Lan-lan, CAO Xiang-hui

2015, 39(12): 25-29. DOI: 10.11973/jxgccl201512007

Abstract PDF

Calculation Formula for Stress Intensity Factors of CT Specimens based on Three Dimensional Finite Element Solutions

JIA Xu, HU Xu-teng, SONG Ying-dong

2015, 39(12): 30-34. DOI: 10.11973/jxgccl201512008

Abstract PDF

Drawing Process Optimization of Thin-walled Aluminum Tube Based on Numerical Simulation

WANG Guan, KOU Lin-yuan, LI Luo-xing

2015, 39(12): 35-42. DOI: 10.11973/jxgccl201512009

Abstract PDF

Constitutive Model of Radial Tyre Tread Compound at High-Speed Impact

SONG Shou-xu, YU De-qiao, WU Shi-qiang

2015, 39(12): 43-46. DOI: 10.11973/jxgccl201512010

Abstract PDF

Extension of Applicable Range of Measuring Residual Stress by Ring-Core Method

CHEN Zhong-an, SUN Guo-chao, ZHAO Yu-jin, JIN Xue-song

2015, 39(12): 47-50. DOI: 10.11973/jxgccl201512011

Abstract PDF

Effect of Rolling Technology on Microstructure and Microhardness of Lowcost X80 Pipeline Steel

DI Yan, WANG Chang-chang, JIA Shu-jun, LIU Qing-you, PENG Ju-bo

2015, 39(12): 51-54. DOI: 10.11973/jxgccl201512012

Abstract PDF

Fatigue Life Prediction of Notched Specimen for 022Cr17Ni12Mo2 Stainless Steel

WU Qi-zhou, LI Jiang-hua, GOU Zhi-fei, JIN Dan

2015, 39(12): 55-58. DOI: 10.11973/jxgccl201512013

Abstract PDF

Compressive Buckling Property of Carbon Fiber Reinforced Epoxy Resin Composite Stiffened Panel

ZHANG Hao-yu, HE Yu-ting, FENG Yu, TAN Xiang-fei, SHAO Qing, YIN Xiang

2015, 39(12): 59-62. DOI: 10.11973/jxgccl201512014

Abstract PDF

Establishment and Verification of Calculation Equation on Pore Size in High Temperature Self-lubricating Microporous Preform with Low Porosity

HAN Tian-tian, WANG Yan-jun, YANG Li-ying

2015, 39(12): 63-66. DOI: 10.11973/jxgccl201512015

Abstract PDF

Numerical Simulation of Welding Residual Stress in Inconel 625 Nickel-based Alloy Tube

JI Li-sen, LING Ze-min, HE Jian

2015, 39(12): 67-70. DOI: 10.11973/jxgccl201512016

Abstract PDF

Instability Behavior and Microstructure Characteristic of TC17 Titanium Alloy Deformation on Two-Phase Region

LIU Ji-xiong, YUE Xu, YANG Jun, WANG Yong-qiang, ZHANG Ping-hui, WANG Ding-chun, GAO Qi

2015, 39(12): 71-74. DOI: 10.11973/jxgccl201512017

Abstract PDF

Three-dimensional Simulation of Plasma Sprayed Molybdenum Splat Formation on Different Substrates

ZHENG Zhen-huan, LI Qiang

2015, 39(12): 75-79. DOI: 10.11973/jxgccl201512018

Abstract PDF

Microstructure and Impact Energy of Heat Affected Zone for X100 Pipeline Steel with High Deformation Resistance

LI Guang, LI Xue-ping, XU Xue-li, ZHANG Xiao-yong, GAO Hui-lin, LIU Yan-ming

2015, 39(12): 80-83. DOI: 10.11973/jxgccl201512019

Abstract PDF

Applicability of Empirical Correlations between Impact Energy and Fracture Toughness for Q345R Steel

CUI Qing-feng, HUI Hu, WANG Hao-yang, LI Pei-ning

2015, 39(12): 84-90. DOI: 10.11973/jxgccl201512020

Abstract PDF

Finite Element Simulation of Shot Peening Effect on Residual Stress in 18Cr2Ni4WA Steel

LU Yun-peng, WANG Chong-jiang

2015, 39(12): 91-94. DOI: 10.11973/jxgccl201512021

Abstract PDF

Finite Element Modeling on Deep Drawing for Truck Oil Tank Cover Plate of Aluminum Magnesium Alloy

LIU Kui-wu, BIAN Wei

2015, 39(12): 95-97. DOI: 10.11973/jxgccl201512022

Abstract PDF

Continuous Cooling Transformation Curves and Microstructures of Copper Bearing Low-Carbon Si-Mn Steel

CHEN Lian-sheng, MI Zhen-peng, TIAN Ya-qiang, SONG Jin-ying, WEI Ying-li, ZHENG Xiao-ping, XU Jing-hui

2015, 39(12): 98-101. DOI: 10.11973/jxgccl201512023

Abstract PDF

Forming Limit Curve for Sheet Plate Obtained by Measurement and Prediction of NADDRG Model

LEI Ze-hong, TU Yuan-qiang, ZHU Hong-chuan, QUAN Fang, ZHANG Wen-ying, YANG Jie

2015, 39(12): 102-106. DOI: 10.11973/jxgccl201512024

Abstract PDF

Failure Analysis of Cracking in Inner Gear Ring Made of 42CrMoA Steel

WANG Rong

2015, 39(12): 107-110. DOI: 10.11973/jxgccl201512025

Abstract PDF

NoticesMore+

Download CenterMore+

LinksMore+

NoticesMore+

Download CenterMore+

LinksMore+

Export File

Citation

Format

Content