Materials and Mechanical Engineering 2017 Vol. 41 No. 6

Effects of Solid Solution and Aging Treatment on Microstructure and Dynamic Mechanical Behavior of Extruded 6013 Al Alloy

YE Tuo, LI Luoxing, TANG Xu, HAO Wenjing, TANG Ming, LI Rongqi

2017, 41(6): 1-4. DOI: 10.11973/jxgccl201706001

Abstract PDF

Effects of Ni to Cr Mass Ratio in Flux-Cored Wire Powder on Microstructure and Mechanical Properties of Duplex Stainless Steel Weld Seam

ZHANG Min, ZHANG Ming, LU Xiaokang, SHU Shaoyan, LI Jihong

2017, 41(6): 5-9. DOI: 10.11973/jxgccl201706002

Abstract PDF

Effect of Electroplated Current Density on Voids at Sn/Electroplated Cu Joint Interface

YANG Yang, YU Chun

2017, 41(6): 10-13. DOI: 10.11973/jxgccl201706003

Abstract PDF

Tensile Deformation Behavior of Q235A Steel under Low-Frequency Vibration

JIANG Zhihong, WANG Baoyu, GONG Yaoteng, HUANG Xinjian

2017, 41(6): 14-16. DOI: 10.11973/jxgccl201706004

Abstract PDF

Fatigue Crack Growth Behavior of 300M Steel under Different Conditions

SHENG Wei, LIU Tianqi, MA Shaojun, CHEN Tianyun

2017, 41(6): 17-19. DOI: 10.11973/jxgccl201706005

Abstract PDF

In-situ Raman Observation of Domain Switching near Crack Tip in PLZT Ferroelectric Ceramics

ZHANG Sa

2017, 41(6): 20-24. DOI: 10.11973/jxgccl201706006

Abstract PDF

Evolution of Structure and Texture of Common Grain-Oriented Silicon Steel during Cold Rolling and Annealing

MA Yonglin, ZHAO Nana, LIU Baozhi, ZHANG Hao, ZHAO Jian, ZHANG Lei, XING Shuqing

2017, 41(6): 25-29. DOI: 10.11973/jxgccl201706007

Abstract PDF

Hot Forming Process with Synchronous Cooling for 7075 Aluminum Alloy

CHEN Guoliang, CHEN Minghe, WANG Ning, SUN Jiawei, WANG Chunyan

2017, 41(6): 30-33. DOI: 10.11973/jxgccl201706008

Abstract PDF

Optimization for Liquid Quenching and Isothermal Quenching with Temperature Process of Medium Carbon Alloy Steel

WANG Rong, GAO Hao, WEI Deqiang

2017, 41(6): 34-38. DOI: 10.11973/jxgccl201706009

Abstract PDF

Compression and Recovery Property of Porous Ti-51%Ni Alloy

WANG Chaojie, LU Xiaofeng, LI Gang, LIU Luwei, ZHU Xiaolei, TU Shantung

2017, 41(6): 39-43. DOI: 10.11973/jxgccl201706010

Abstract PDF

Corrosion Fatigue Behavior of S135 Drill Pipe Steel in H₂S Enviornment

LUO Sheji, WEN Ninghua, HAN Lihong

2017, 41(6): 44-48. DOI: 10.11973/jxgccl201706011

Abstract PDF

Structure and Remnant Life of HP40Nb Steel Furnace Tube after Long-Term High-Temperature Service

FAN Zhao, XU Wei, CHEN Weimin, WANG Guanghui

2017, 41(6): 49-54. DOI: 10.11973/jxgccl201706012

Abstract PDF

Fabrication of Copper-based Powder Metallurgy Brake Pad for High-Speed Train and Its Friction and Wear Property

WANG Lei, PAN Qirui, ZHU Song, WU Shezhang

2017, 41(6): 55-58. DOI: 10.11973/jxgccl201706013

Abstract PDF

Thermal Stability of Q235 Steel after Constrained Groove Pressing Deformation

ZHANG Xiumei, PENG Kaiping

2017, 41(6): 59-62. DOI: 10.11973/jxgccl201706014

Abstract PDF

Microstructure and Mechanical Properties of Silver-Loaded Layer on Surface of TC4 Alloy Prepared by Friction Stir Processing

ZHANG Jinkai, CHENG Mengqi, WEI Xingqiao, WU Laizhi, WANG Liqiang, LÜ Weijie

2017, 41(6): 63-68. DOI: 10.11973/jxgccl201706015

Abstract PDF

Finite Element Simulation of Hot Isostatic Pressing Densification Process for W-Cu Alloy Powder

CHEN Haipeng, WANG Fazhan

2017, 41(6): 69-74. DOI: 10.11973/jxgccl201706016

Abstract PDF

Numerical Simulation for Female Die Fillet Radius Effect on Hot Forming Fracture Behavior of High Strength Steel Sheet

WANG Min, ZHANG Chun, XIAO Haifeng, LI Bing, XI Jiansheng

2017, 41(6): 75-78. DOI: 10.11973/jxgccl201706017

Abstract PDF

Main Crack Propagation Behavior of U71Mn Steel Considering Secondary Crack

WEN Lianghua, LI Xiaotao, LI Xu, CAO Shihao, JIANG Xiaoyu

2017, 41(6): 79-83. DOI: 10.11973/jxgccl201706018

Abstract PDF

Microstructures of 35CrMo Steel after High-Temperature Compression Deformation under Different Conditions

HUANG Yuanchun, WANG Sanxing, XIAO Zhengbing, LI Wenjing, HUANG Yutian, LIU Hui

2017, 41(6): 84-89. DOI: 10.11973/jxgccl201706019

Abstract PDF

Numerical Simulation on Stress Field of Cold Metal Transfer (CMT) Welded Joint Aluminum and Steel Dissimilar Metals

LIU Guohui, CHE Hongyan, MA Lei, YU Siliang, CAO Rui

2017, 41(6): 90-94. DOI: 10.11973/jxgccl201706020

Abstract PDF

Fracture Reason of 35CrMo Steel Bolt in Necking Process

ZHANG Benguo, ZHAO Jian, XIA Jiansheng, FAN Lifeng

2017, 41(6): 95-98. DOI: 10.11973/jxgccl201706021

Abstract PDF

Leakage Cause Analysis of Oil Pipeline at Output Terminal of Crude Oil

LIN Yang

2017, 41(6): 99-102. DOI: 10.11973/jxgccl201706022

Abstract PDF

NoticesMore+

Download CenterMore+

LinksMore+

NoticesMore+

Download CenterMore+

LinksMore+

Export File

Citation

Format

Content