• 中文核心期刊
  • CSCD中国科学引文数据库来源期刊
  • 中国科技核心期刊
  • 中国机械工程学会材料分会会刊
Advanced Search

Effect of Carburizing on Microstructure and Tensile Properties of EthyleneCracking Furnace Tube after Service
CHEN Weiqing, HAN Zhiyuan, WU Jianping, CAO Luowei, LIU Wenbin
2020, 44(11): 1-6. DOI: 10.11973/jxgccl202011001
Abstract PDF
Damage Mechanism of GH4169 Alloy under Creep-Fatigue Interaction
BAO Xiaoguang, WANG Runzi, WANG Ji, GUO Sujuan, ZHANG Xiancheng
2020, 44(11): 7-14,20. DOI: 10.11973/jxgccl202011002
Abstract PDF
Compatibility of Structure Materials of Primary Loop in Reactor and Decontamination Solution
ZHAO Yuxiang, KANG Wu, WU Fangyun, WEN Jie, PANG Peng
2020, 44(11): 15-20. DOI: 10.11973/jxgccl202011003
Abstract PDF
Leakage Causes of Fin Tube of Middle Pressure Evaporator for Heat Recovery Steam Generator of Gas-Steam Combined Cycle Unit
WU Yue
2020, 44(11): 21-24,28. DOI: 10.11973/jxgccl202011004
Abstract PDF
Reason for Cracking of an Intercity Train Gearbox
ZHAO Lijuan
2020, 44(11): 25-28. DOI: 10.11973/jxgccl202011005
Abstract PDF
Research Status on Powder Recycling of Metal Powder BedFusion Additive Manufacturing
HE Yanli, LEI Liming, HOU Huipeng
2020, 44(11): 29-34. DOI: 10.11973/jxgccl202011006
Abstract PDF
Applications of Laser Cladding Technique in Remanufacturing of Shaft Parts
WANG Zhengqiang, LI Wenge, DU Xu, ZHAO Yuantao
2020, 44(11): 35-40. DOI: 10.11973/jxgccl202011007
Abstract PDF
Effect of Scanning Speed on Internal Defects and Mechanical Properties ofTi-6Al-4V Alloy Processed by Selective Laser Melting
JIANG Xiyi, XIA Weilong, LOU Dianjun, REN Xuepeng, SHAO Shuai, LI Haoqing, LIU Shuyu, FANG Xiaoying
2020, 44(11): 41-45. DOI: 10.11973/jxgccl202011008
Abstract PDF
Research Progress and Prospects of Metal Powder Preparation Technique for Additive Manufacturing
HE Jie, MA Shizhou, ZHANG Xinggao, GAI Xiqiang, CHEN Houhe, ZHANG Kaichuang
2020, 44(11): 46-52,58. DOI: 10.11973/jxgccl202011009
Abstract PDF
Analytical Solutions of Thermal Residual Stress and Deformation of 3D Printed Parts
ZHANG Zhaoshen, SHU Xiaoping
2020, 44(11): 53-58. DOI: 10.11973/jxgccl202011010
Abstract PDF
Laser Cladding Process of Flow Channel in 316L Stainless SteelBipolar Plate for Fuel Cells
XIAO Gang, LI Shichun, XIE Zhiyi, HUANG Guandi, ZHAN Zhuangchao, QUAN Sichang
2020, 44(11): 59-65. DOI: 10.11973/jxgccl202011011
Abstract PDF
Effect of Solid Solution and Aging Treatment on Microstructure and Hardness of Selective Laser Melting GTD222 Nickel-Based Alloy
PAN Weitao, ZHU Guoliang, WANG Rui, WANG Donghong, DONG Anping, SHU Da, SUN Baode
2020, 44(11): 66-71. DOI: 10.11973/jxgccl202011012
Abstract PDF
Ultrahigh Cycle Fatigue Performance of GH4169 Alloy by Selective Laser Melting
SONG Zongxian, WANG Dongpo, WU Zhisheng, SUN Ke, WU Han, LIU Xinming
2020, 44(11): 72-77. DOI: 10.11973/jxgccl202011013
Abstract PDF
Prediction of Single Weld Bead Size of TIG Welding Arc Additive Manufacturing
ZHAO Peng, LÜ Yanming, ZHOU Wenjun, PAN Yu, BAI Shaoyun
2020, 44(11): 78-82,91. DOI: 10.11973/jxgccl202011014
Abstract PDF
Preparation and Performance of GNPs-MWCNT Conductive PolymerComposite Materials by Direct Writing 3D Printing
CHEN Xiaojun, HU Cuiwen, CUI Ziyi, MO Deyun, LIAN Haishan, JIANG Shuzhen, GONG Manfeng, LUO Yihui
2020, 44(11): 83-91. DOI: 10.11973/jxgccl202011015
Abstract PDF
Effect of Ceramic Shot Peening on Fatigue Properties of TC18 TitaniumAlloy by Laser Additive Manufacturing
FENG Kangtun, ZHAI Jiayou, YANG Kai, ZHANG Pingze, GAO Di
2020, 44(11): 92-96,101. DOI: 10.11973/jxgccl202011016
Abstract PDF
Feasibility and Mechanical Properties of Ultra-thin Aluminum Alloy Sheet Prepared by Selective Laser Melting
LIU Zhengwu, SHI Yun, WANG Yi, HAO Yunbo, CUI Yutao, ZHU Xiaogang
2020, 44(11): 97-101. DOI: 10.11973/jxgccl202011017
Abstract PDF
Effect of Pressure Infiltration on Properties of 3D Printed Al2O3 Ceramics
PEI Wei, CAO Shu, YU Jinghu
2020, 44(11): 102-105. DOI: 10.11973/jxgccl202011018
Abstract PDF
Flatness Change of Titanium Alloy Thin-Walled Parts by Laser Cladding and Milling Remanufacturing
YU Fen, ZHANG Jin, WANG Ning, WANG Tao
2020, 44(11): 106-110. DOI: 10.11973/jxgccl202011019
Abstract PDF
Effect of Solid Content on PLZT Ceramic Slarry Flowability in 3D Printing by Single Screw Extrusion Mode
LI Bin, GU Hai, ZHANG Jie, JIANG Jie, SUN Jianhua
2020, 44(11): 111-114. DOI: 10.11973/jxgccl202011020
Abstract PDF

Materials and Mechanical Engineering

Address：99 Handan Road, ShanghaiPost Code: 200437

Tel：021-65556775-368Email:mem@mat-test.com

沪ICP备17055736号-5

Supported by: Beijing Renhe Information Technology Co., Ltd.  Baidu Analytics