• 中文核心期刊
  • CSCD中国科学引文数据库来源期刊
  • 中国科技核心期刊
  • 中国机械工程学会材料分会会刊
Advanced Search
CHEN Yong, LU Dai-ding, KONG Wei-hai. Cryogenic Impact Toughness of Strain Strengthened Austenitic Stainless Steel[J]. Materials and Mechanical Engineering, 2015, 39(6): 73-78. DOI: 10.11973/jxgccl201506015
Citation: CHEN Yong, LU Dai-ding, KONG Wei-hai. Cryogenic Impact Toughness of Strain Strengthened Austenitic Stainless Steel[J]. Materials and Mechanical Engineering, 2015, 39(6): 73-78. DOI: 10.11973/jxgccl201506015
shu

Cryogenic Impact Toughness of Strain Strengthened Austenitic Stainless Steel

More Information
  • Received Date: April 19, 2015
    Graphical Abstract
    • Abstract
  • S30408 and S31603 austenitic stainless steel were strengthened with different strain degrees 10%-20% at room temperature. The effect of stain degree on cryogenic impact toughness of austenitic stainless steel was investigated through impact tests from room temperature to -269 ℃. The results show that impact toughness of two steels decreased with increasing stain degree. The impact absorbed energy of S30408 steel and S31603 steel after strain strengthening decreased with the decrease of temperature. When the temperature was lower than -196℃ (77K), the impact absorbed energy became stable showing a platform. Both austenitic stainless steels had good cryogenic toughness after strain strengthening in large stain degree (20%), which could conform to the requirements in technical standards.
    • FullText(HTML)
    • References (23)
  • [1]
    韩豫, 陈学东, 刘全坤, 等. 奥氏体不锈钢应变强化工艺及性能研究[J]. 机械工程学报, 2012, 48(2): 87-92.
    [2]
    韩豫, 陈学东, 刘全坤, 等.基于应变强化技术的奥氏体不锈钢压力容器轻型化设计探讨[J]. 压力容器, 2010, 27(9): 16-20.
    [3]
    舒翔宇, 郑津洋, 寿比南, 等.应变强化奥氏体不锈钢焊接接头冲击试验研究[J]. 浙江大学学报:工学版, 2012, 46(7): 1162-1167.
    [4]
    陈挺, 王步美, 徐涛, 等. 奥氏体不锈钢压力容器应变强化技术的发展及国外标准比较[J]. 机械工程材料, 2012, 36(3): 1-4.
    [5]
    JOSHUA A, LICHTENFELD, MARTIN C, et al. Effect of strain rate on stress-strain behavior of alloy 309 and 304L austenitic stainless steel[J]. Metallurgical and Materials Transactions: A, 2006, 37: 147-150.
    [6]
    JUHO T, PERTTI N, GERSOM P, et al. Effect of strain rate on the strain-induced -martensite transformation and mechanical properties of austenitic stainless steels[J]. Metallurgical and Materials Transactions: A, 2005, 36:421-426.
    [7]
    KYUNG-TAE P. On the Transitions of deformation modes of fully austenitic steels at room temperature[J]. Met Mater Int, 2010, 16 (1):1-6.
    [8]
    王松涛, 杨柯, 单以银, 等.高氮奥氏体不锈钢与316L不锈钢的冷变形行为研究[J].金属学报, 2007, 43(2): 171-176.
    [9]
    WOONG S P, SEONG W Y, MYUNG H K. Strain-rate effects on the mechanical behavior of the AISI 300 series of austenitic stainless steel under cryogenic environments[J]. Materials & Design, 2010, 31(8): 8-11.
    [10]
    杨卓越, 王建, 陈嘉砚.304奥氏体不锈钢热诱发马氏体相变研究[J].材料热处理学报, 2008, 29(1): 98-101.
    [11]
    GB 24511—2009 承压设备用不锈钢钢板及钢带[S].
    [12]
    刘伟, 李强, 焦德志.冷轧301L奥氏体不锈钢的变形和应变硬化行为[J].金属学报, 2008, 44(7): 775-780.
    [13]
    TALONEN J, HANNINEN H. Formation of shear bands and strain-induced martensite during plastic deformation of metastable austenitic stainless steels[J]. Acta Materialia, 2007, 55:6108-6118.
    [14]
    MILAD M, ZREIBA N, ELHALOUANI F, et al. The effect of cold work on structure and properties of AISI 304 stainless steel[J]. Journal of Materials Processing Technology, 2008, 203:80-85.
    [15]
    徐祖耀.马氏体相变与马氏体[M].北京: 科学出版社, 1999: 16.
    [16]
    MORRIS L A, PECKNER D, BERNSTEIN I M. Handbook of stainless steels[M]. New York: McGraw Hill Book Corporation, 1977:17-19.
    [17]
    EICHELMAN A H, HULL F C. The effect of composition on the temperature of spontaneous transformation of austenite to martensite in 18-8 type stainless steel[J]. Transactions of the ASM, 1953, 45:77-81.
    [18]
    NOHARA K, ONO Y, OHASI N. Composition and grain size dependence of stain-induced martensitic transformation in metastable austenitic stainless steel[J]. Journal of the Iron and Steel Institute, 1977, 63:772-778.
    [19]
    SCHRAMM R E, REED R P. Stacking fault energy of seven commercial austenitic stainless steels[J]. Metallurgical Transactions:A, 1975, 6:1345-1351.
    [20]
    EN 13445-4-2009 Unfired pressure vessels-part4: Fabrication[S].
    [21]
    ASME boiler and pressure vessel code VIII dividion 1: rules for construction of pressure vessels[S].
    [22]
    GB 150—2011压力容器[S].
    [23]
    EN 13458-2-2002 Cryogenic vessels-static vacuum insulated vessels—part 2: design, fabrication, inspection and testing[S].
    • Related Articles

Catalog

    Get Citation
    PDF
    XML
    Article views (34) PDF downloads (1) Cited by()
    Turn off MathJax
    Article Contents
    Abstract
    References

    Materials and Mechanical Engineering

    Address：99 Handan Road, ShanghaiPost Code: 200437

    Tel：021-65556775-368Email:mem@mat-test.com

    沪ICP备17055736号-5

    Supported by: Beijing Renhe Information Technology Co., Ltd.  Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return