• 中文核心期刊
  • CSCD中国科学引文数据库来源期刊
  • 中国科技核心期刊
  • 中国机械工程学会材料分会会刊
Advanced Search
ZHU Yongbo, YANG Xiangjie, GUI Yunpeng. Effect of Hot Extrusion and Heat Treatment on Microstructure and Tensile Properties of 7075 Aluminum Alloy Prepared by Semi-Solid Method[J]. Materials and Mechanical Engineering, 2018, 42(1): 39-43. DOI: 10.11973/jxgccl201801008
Citation: ZHU Yongbo, YANG Xiangjie, GUI Yunpeng. Effect of Hot Extrusion and Heat Treatment on Microstructure and Tensile Properties of 7075 Aluminum Alloy Prepared by Semi-Solid Method[J]. Materials and Mechanical Engineering, 2018, 42(1): 39-43. DOI: 10.11973/jxgccl201801008
shu

Effect of Hot Extrusion and Heat Treatment on Microstructure and Tensile Properties of 7075 Aluminum Alloy Prepared by Semi-Solid Method

  • 1. School of Mechanical and Electrical Engineering, Nanchang University, Nanchang 330031, China;

  • 2. Key Lab of Near Net Forming in Jiangxi Province, Nanchang University, Nanchang 330031, China;

  • 3. Jiangxi Xiongying Aluminum Co., Ltd., Nanchang 330500, China

More Information
  • Received Date: January 17, 2017
  • Revised Date: December 24, 2017
    Graphical Abstract
    • Abstract
  • 7075 aluminum alloy casting rod was prepared by using semi-solid slurry preparation process of low superheat pouring with a shear field (LSPSF), and homogenization treatment, hot extrusion and T6 heat treatment were carried out in sequence. The effect of hot extrusion and heat treatment on microstructure and tensile properties of the aluminum alloy was investigated. The results show that the near spherical grains in the as-cast aluminum alloy changed into irregular shapes in the process of hot extrusion. The relatively obvious grain boundary in the structure of the aluminum alloy was formed after T6 treatment. (110) crystal plane in the microstructure of the aluminum alloy had preferred orientation after treated by hot extrusion and T6 heat treatment. The tensile strength and yield strength of the aluminum alloy treated by hot extrusion increased by 136% and 140% comparing with those of the aluminum alloy in as-cast state, respectively. After T6 heat treatment, the tensile strength and yield strength were further improved. The fracture mode of the aluminum alloy in as-cast state was brittle fracture, and the fracture modes after hot extrusion and T6 heat treatment were both ductile fracture.
    • FullText(HTML)
    • References (23)
  • [1]
    曲展鸿,邵鹿峰. 中国铝加工业市场及发展浅析[J].有色金属加工,2014,43(4):7-9.
    [2]
    HUO W, HOU L, CUI H, et al. Fine-grained AA 7075 processed by different thermo-mechanical processings[J]. Materials Science & Engineering A, 2014, 618:244-253.
    [3]
    DURSUN T, SOUTIS C. Recent developments in advanced aircraft aluminium alloys[J]. Materials & Design, 2014, 56(4):862-871.
    [4]
    CHAYONG S, ATKINSON H V, KAPRANOS P. Multistep induction heating regimes for thixoforming 7075 aluminium alloy[J].Metal Science Journal, 2013, 20(4):490-496.
    [5]
    陈小明,宋仁国, 李杰. 7xxx系铝合金的研究现状及发展趋势[J]. 材料导报,2009, 23(3):67-70.
    [6]
    WU X H, ZHAO G Q, LUAN Y G, et al. Structure optimization of porthole die based on aluminum profile extrusion process numerical simulation[J].Transactions of Nonferrous Metals Society of China, 2006,16(s3):1261-1264.
    [7]
    YU C D, ZHANG X X, ZHANG W F, et al. Numerical simulation and experiment of internal cracks of 7050 aluminum alloy during cold extrusion[J].Journal of Plasticity Engineering, 2015, 22(1):29-33.
    [8]
    杨湘杰. 半固态成形技术最新进展——第11届合金与复合材料半固态成形国际会议技术报告综述[J]. 特种铸造及有色合金,2010,30(10):918-922.
    [9]
    黄持伟,杨湘杰,刘旭波,等. 转管倾斜角度对半固态A356合金组织的影响[J]. 铸造,2014,63(1):30-33.
    [10]
    王扬虎. A356合金半固态流变挤压过程中组织分析[D]. 兰州:兰州理工大学,2013.
    [11]
    马国睿. Mg-Al-Si合金半固态组织演变及其影响因素[D]. 哈尔滨:哈尔滨工程大学,2011.
    [12]
    刘旭波,杨湘杰,郭洪民. 铝合金半固态浆料LSPSF法在线制备[J]. 特种铸造及有色合金,2008,28(10):762-765.
    [13]
    郭洪民. 半固态铝合金流变成形工艺与理论研究[D]. 南昌:南昌大学, 2007.
    [14]
    朱会, 杨湘杰, 郭洪民. A356铝合金近球晶组织三维重构及空间结构表征[J]. 热加工工艺, 2013, 42(17):27-31.
    [15]
    郭洪民, 杨湘杰. LSPSF流变铸造工艺及其应用[J]. 特种铸造及有色合金, 2008(增刊1):355-359.
    [16]
    李春晓,郑小平,赵丹,等. 预变形量对7075合金半固态组织与性能的影响[J]. 金属热处理,2016,41(2):127-131.
    [17]
    周冰. 强制对流搅拌制备7075铝合金半固态组织性能研究及数值模拟[D].北京:北京科技大学,2015.
    [18]
    林高用, 彭大暑, 魏圣明,等. 强化固溶处理对7075铝合金组织的影响[J]. 金属热处理, 2002, 27(11):30-33.
    [19]
    陈丹丹, 张海涛, 蒋会学,等. DC铸造7075铝合金微观偏析的量化分析[J]. 材料与冶金学报, 2011, 10(3):220-225.
    [20]
    赵青. 热处理工艺对7075铝合金组织和力学性能的影响[D].郑州:郑州大学,2012.
    [21]
    王海军. 7075合金大直径铸锭均匀化技术研究[D].北京:北京科技大学,2015.
    [22]
    张丁非,耿青梅,胡红军,等.挤压-剪切AZ61镁合金组织和织构的演变[J].材料热处理学报, 2014,35(2):39-42.
    [23]
    刘继华,李荻,刘培英. 热处理对7075铝合金应力腐蚀及断口形貌的影响[J].材料热处理学报,2010, 31(7):109-113.
    • Related Articles

Catalog

    Get Citation
    PDF
    XML
    Article views (6) PDF downloads (1) Cited by()
    Turn off MathJax
    Article Contents
    Abstract
    References

    Materials and Mechanical Engineering

    Address：99 Handan Road, ShanghaiPost Code: 200437

    Tel：021-65556775-368Email:mem@mat-test.com

    沪ICP备17055736号-5

    Supported by: Beijing Renhe Information Technology Co., Ltd.  Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return