Citation: | LIU Xiao, YAN Huansong, KONG Zukai, ZHAO Zhenhua, LIU Lulu, CHEN Wei. Dynamic Mechanical Behavior and Constitutive Relationship of Superalloy GH4169[J]. Materials and Mechanical Engineering, 2019, 43(1): 75-81. DOI: 10.11973/jxgccl201901016 |
[1] |
KONG X, LI B, JIN Z, et al. Broaching performance of superalloy GH4169 based on FEM[J]. Journal of Materials Science & Technology, 2011,27(12):1178-1184.
|
[2] |
WANG Z T, ZHANG S H, CHENG M, et al. Kinematics and dynamics model of GH4169 alloy for thermal deformation[J]. Journal of Iron and Steel Research, International, 2010,17(7):75-78.
|
[3] |
黄新春, 张定华, 姚倡锋,等. 镍基高温合金GH4169磨削参数对表面完整性影响[J]. 航空动力学报, 2013, 28(3):621-628.
|
[4] |
胡壮麒, 刘丽荣, 金涛,等. 镍基单晶高温合金的发展[J]. 航空发动机,2005,31(3):1-7.
|
[5] |
陈刚, 陈忠富, 陶俊林,等. TC4动态力学性能研究[J]. 实验力学, 2005,20(4):605-609.
|
[6] |
陈敏. TC4钛合金力学性能测试及动态材料模型研究[D].南京:南京航空航天大学,2012.
|
[7] |
JOHNSON G R, COOK W H. A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures[C]//Proceedings of the Seventh International Symposium on Ballistics. Netherlands:The American Defense Preparedness Association (ADPA), 1983:5412547.
|
[8] |
张宏建, 温卫东, 崔海涛,等. Z-A模型的修正及在预测本构关系中的应用[J]. 航空动力学报, 2009, 24(6):1311-1315.
|
[9] |
HALLQUIST J O. LS-DYNA keyword user's manual[M].California:Livermore Software Technology Corporation, 2003.
|
[10] |
张锐杰. GH4169镍基高温合金动态力学性能研究[D].北京:北京理工大学, 2016.
|
[11] |
ERICE B, PÉREZ M, MARÍA J, et al. An experimental and numerical study of ductile failure under quasi-static and impact loadings of Inconel 718 nickel-base superalloy[J]. International Journal of Impact Engineering, 2014, 69(7):11-24.
|
[12] |
WANG X, HUANG C, ZOU B, et al. Dynamic behavior and a modified Johnson-Cook constitutive model of Inconel 718 at high strain rate and elevated temperature[J]. Materials Science & Engineering:A, 2013, 580(37):385-390.
|
[13] |
陈弘伟.镍基718超合金在不同温度下之撞击特性与微观结构分析[D].台南:成功大学, 2009.
|
[14] |
王涛, 陈国定, 巨江涛.GH4169高温合金高应变率本构关系试验研究[J].航空动力学报,2013, 34(4):946-953.
|
[15] |
ASM COMMITTEE. Mechanical testing and evaluation[M]//ASM Handbook. Ohio:ASM International, 1998:425-560.
|
[16] |
TENG X, WIERZBICKI T. Evaluation of six fracture models in high velocity perforation[J]. Engineering Fracture Mechanics,2006, 73(12):1653-1678.
|
[17] |
WIERZBICKI T, BAO Y B, LEE Y W, et al. Calibration and evaluation of seven fracture models[J]. International Journal of Mechanical Sciences, 2005,47(4/5):719-743.
|
[18] |
胡时胜.霍普金森压杆技术[J].兵器材料科学工程,1991(11):40-47.
|
[19] |
JOHNSON G R, COOK W H. Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures[J]. Engineering Fracture Mechanics, 1985, 21(1):31-48.
|
[1] | YU Haiyan, WU Hangyu, SHI Huiru. Strength Degradation and Aging Life Prediction for Carbon Fiber Reinforced Polymers Laminates in Hygrothermal Environment[J]. Materials and Mechanical Engineering, 2021, 45(4): 40-45. DOI: 10.11973/jxgccl202104008 |
[2] | WU Shuquan, HAN Tao, JIANG Shikai, ZHANG Zhibo, JIANG Feng. Strength Degradation Behavior of P91 Steel for a Supercritical Unit[J]. Materials and Mechanical Engineering, 2021, 45(1): 28-33,40. DOI: 10.11973/jxgccl202101005 |
[3] | LI Songlin, CAO Luowei, HAN Zhiyuan, CHENG Fangjie. Microstructure and Tensile Properties of Heat Affected Zone bySimulation Welding of Service-Degraded HP40Nb Furnace Tube[J]. Materials and Mechanical Engineering, 2020, 44(12): 33-36. DOI: 10.11973/jxgccl202012006 |
[4] | WANG Wei, JIANG Xiangwei, GAO Zhikun, CHI Qingxin, LI Hui, SHEN Jian, JIANG Sumeng, LOU Langhong. Service Temperature Evaluation Based on Microstructural Degradation of Gas Turbine Blade after Cumulative Operation for 2 700 h[J]. Materials and Mechanical Engineering, 2019, 43(3): 17-23. DOI: 10.11973/jxgccl201903004 |
[5] | LI Yan, LU Jintao, YANG Zhen, HUANG Jinyang, ZHOU Yongli, ZHU Ming. Corrosion Behavior of Aluminide Coating Modified Super304H Steel in Simulated Boiler Coal-Ash/Gas Environments[J]. Materials and Mechanical Engineering, 2017, 41(5): 89-94,99. DOI: 10.11973/jxgccl201705018 |
[6] | XU Shan-hua, WANG Hao, SU Lei. Degradation Law of Mechanical Properties of Q235 Steel Plate in Neutral Salt Spray Corrosion Environment[J]. Materials and Mechanical Engineering, 2016, 40(5): 86-91. DOI: 10.11973/jxgccl201605017 |
[7] | WANG Hong-ju, LI Xiao, ZHANG Pei, ZHAO Chang-li, ZHANG Xiao-nong. Preparation and Properties of Modified Anti-degradation Coating on the Surface of Mg-Zn Alloy Bone Screws[J]. Materials and Mechanical Engineering, 2013, 37(2): 66-70. |
[8] | KANG Qing-shan, HE Yu-ting, ZHANG Hai-wei, SHAO Qing, WU Li-ming. Fatigue Property Degradation Rule of Aircraft Material under Parking Environment[J]. Materials and Mechanical Engineering, 2012, 36(8): 72-74. |
[9] | WU Ming-xia, WANG Shu-lin, DING Hao-ran, HAN Guang-qiang. Preparation of ZnO Nanostructures by Roller Vibration Milling for Photocatalytic Degradation of Methyl Orange[J]. Materials and Mechanical Engineering, 2007, 31(12): 87-90. |
[10] | ZHOU Hong-ming, YI Dan-qing. Cyclic Oxidation Behavior of NiCrAlY Coating Deposited on Co Based High-temperature Alloy by ARC Ion Plating Technology[J]. Materials and Mechanical Engineering, 2007, 31(12): 54-58. |
1. |
邓磊,何志江,殷成凤,王虹,高国强,王娟. 界面氧化对弓网接触副摩擦磨损性能的影响研究. 铁道标准设计. 2024(12): 162-168 .
![]() |