Microstructure and Properties of Weld of 06Cr20Ni11 Steel by Submerged Arc Welding

YANG Yue; LI Yajun; GUO Rong; GONG Lihua; WANG Zhengyun

doi:10.11973/jxgccl202002004

Materials and Mechanical Engineering > 2020 > 44(2): 18-21,72. > DOI: 10.11973/jxgccl202002004

YANG Yue, LI Yajun, GUO Rong, GONG Lihua, WANG Zhengyun. Microstructure and Properties of Weld of 06Cr20Ni11 Steel by Submerged Arc Welding[J]. Materials and Mechanical Engineering, 2020, 44(2): 18-21,72. DOI: 10.11973/jxgccl202002004

Citation:

PDF (4680 KB)

Microstructure and Properties of Weld of 06Cr20Ni11 Steel by Submerged Arc Welding

1. Department of Modern Manufacturing Engineering, Yibin Vocational and Technical College, Yibin 644003, China;
2. CNPC Jichai Power Company Limited Chengdu Compressor Branch, Chengdu 610100, China;
3. School of Materials of Science and Engineering, Xihua University, Chengdu 610039, China

More Information

Received Date: January 25, 2019
Revised Date: January 02, 2020

Graphical Abstract

Abstract

Abstract

06Cr20Ni11 steel was welded by submerged arc welding with SJ601A flux and HS308L welding wire. The microstructure and properties of the joint weld were studied by methods such as macroscopic and microscopic observation, chemical composition analysis, tensile test, impact test and intergranular corrosion test. The results show that the weld was well formed, and the surface was free of sticky slag, porosity and pitting defects. The X-ray flaw detection results showed the weld level was level I. The weld metal was solidified in the ferrite-austenite mode, and the microstructure of the weld metal consisted of austenite and a small amount of dendritic δ ferrite. The tensile properties and impact resistance of the weld metal met the standard requirements, the impact fracture mode was ductile fracture and the weld showed excellent resistance to intergranular corrosion.
- 06Cr20Ni11 steel,
- submerged arc welding,
- microstructure,
- mechanical property,
- intergranular corrosion resistance

FullText(HTML)

References (16)

References

[1]	余小斌,刘奋成,陶智俊,等.06Cr25Ni20奥氏体不锈钢钢管焊接接头的组织和性能[J].热加工工艺,2014,43(23):194-195.
[2]	刘海祥,杨莉,葛进国.不同焊接工艺下304不锈钢焊接接头组织及力学性能的研究[J].热加工工艺,2016,45(3):242-244.
[3]	张绍棋,闫焉服,王广欣,等.MnO含量对SJ612焊剂焊接18-8不锈钢接头组织和性能的影响[J].机械工程材料,2017,41(8):54-58.
[4]	杨瑞成,孟威,舒俊,等.热轧410S不锈钢板材钨极氩弧焊焊接接头的组织与性能[J].机械工程材料,2009,33(11):72-75.
[5]	VINOTH K M, BALASUBRAMANIAN V. Microstructure and tensile properties of friction welded SUS 304HCu austenitic stainless steel tubes[J]. International Journal of Pressure Vessels & Piping, 2014, 113:25-31.
[6]	SUN D, HAN G, VAODEE S, et al. Tensile behaviour of type 304 austenitic stainless steels in hydrogen atmosphere at low temperatures[J]. Materials Science and Technology,2001, 17(3):302-308.
[7]	杨秦政, 李晓延,张亮. 厚壁316LN不锈钢管焊接接头中残余应力的有限元模拟[J]. 机械工程材料, 2017, 41(3):93-97.
[8]	李海新, 张琳琳, 张婧,等. 厚板奥氏体不锈钢焊接技术研究现状[J]. 焊接, 2017(6):35-38.
[9]	MARK A F, LI W, SHARPLES S, et al. Comparison of grain to grain orientation and stiffness mapping by spatially resolved acoustic spectroscopy and EBSD[J]. Journal of Microscopy, 2017, 267(1):89-97.
[10]	张帅谋, 张雪峰, 王小平. 时效温度对2205双相不锈钢焊接接头显微组织及冲击性能的影响[J]. 机械工程材料, 2015, 39(3):41-44.
[11]	朱亮, 李敬霞. Cr15Mn9Ni1N不锈钢焊接接头的组织及凝固模式[J]. 热加工工艺, 2009, 38(15):1-4.
[12]	LIPPOLD J C, KOTECKI D J.不锈钢焊接冶金学及焊接性[M]. 陈剑虹,译.北京:机械工业出版社,2008.
[13]	李亚军, 杨飞, 李欣雨,等. 镍基合金埋弧焊焊剂的研制[J]. 金属加工(热加工), 2016(22):26-29.
[14]	董强, 许鸿吉, 谢明,等. 薄板06Cr19Ni10不锈钢焊接接头组织与性能的研究[J]. 制造技术与机床, 2016(4):65-69.
[15]	李亚军,赵太源,肖莉. CO₂压缩机管道用不锈钢的焊接工艺研究[J]. 现代制造工程, 2019(11):90-93.
[16]	黄宗仁,董岱林,冯琳娜. 核电厂主管道手工焊与自动焊工艺对比分析[J]. 电焊机, 2015, 45(11):107-111.

Cited By

Get Citation

PDF

XML

Article views (4) PDF downloads (0)

Turn off MathJax

Article Contents

Abstract

References

Microstructure and Properties of Weld of 06Cr20Ni11 Steel by Submerged Arc Welding

Abstract

References

Catalog

Export File

Citation

Format

Content