• 中文核心期刊
  • CSCD中国科学引文数据库来源期刊
  • 中国科技核心期刊
  • 中国机械工程学会材料分会会刊
Advanced Search
ZHENG Cheng, LU Qi, LI Hongtao. Influence of Staircase Fatigue Test Data Closed or Not onStatistical Estimation of Material Fatigue Strength[J]. Materials and Mechanical Engineering, 2021, 45(1): 41-45. DOI: 10.11973/jxgccl202101007
Citation: ZHENG Cheng, LU Qi, LI Hongtao. Influence of Staircase Fatigue Test Data Closed or Not onStatistical Estimation of Material Fatigue Strength[J]. Materials and Mechanical Engineering, 2021, 45(1): 41-45. DOI: 10.11973/jxgccl202101007

Influence of Staircase Fatigue Test Data Closed or Not onStatistical Estimation of Material Fatigue Strength

More Information
  • Received Date: August 10, 2020
  • Revised Date: November 25, 2020
  • Two types of unclosed staircase chart were cited, and reasonable assumptions were made on the test results that may appear during the staircase fatigue test. The effect of test data closed or not on the fatigue strength was analyzed when the fatigue strength was statistically estimated by the staircase method. The results show that when the last-level stress in the staircase chart of unclosed test data was lower than the first effective stress, the statistically estimated fatigue strength after subsequent supplementary of hypothetical staircase chart was also lower than the statistically estimated fatigue strength from the original unclosed fatigue test staircase chart. When the last-level stress of the staircase chart of unclosed test data was higher than the first effective stress, the statistically estimated fatigue strength after subsequent supplementary of hypothetical staircase chart was also higher than the statistically estimated fatigue strength from the original unclosed fatigue test staircase chart. Even if test data was not closed, the fatigue strength statistically estimated from failure events and non-failure events may be equal.
  • [1]
    机械工业理化检验人员技术培训和资格鉴定委员会.力学性能试验[M].北京:中国计量出版社,2008:167-168.

    Technical Training and Qualification of Physical and Chemical Inspection Personnel in Machinery Industry. Mechanical property test[M]. Beijing:China Metrology Publishing House, 2008:167-168.
    [2]
    陶美娟.材料质量检测与分析技术[M]. 北京:中国质检出版社,2018. TAO M J. Material quality inspection and analysis technology[M]. Beijing:China Quality Inspection Publishing House, 2018.
    [3]
    张冰,陈立伟,陈永祥,等.小子样测定叶片S-N曲线试验方法研究[J].中国测试,2015,41(12):124-127.

    ZHANG B, CHEN L W,CHEN Y X,et al. Studies on small sample test method for blade S-N curve[J]. China Measurement & Test, 2015,41(12):124-127.
    [4]
    余荣镇, 涂永康, 王守信. 小子样升降法[J]. 机械强度, 1985(3):23-27.

    YU R Z, TU H K, WANG S X. Stair method on small sample[J]. Journal of Mechanical strength, 1985(3):23-27.
    [5]
    何雪浤,谢伟涛.几种常用的金属材料疲劳极限试验方法[J].理化检验(物理分册),2015,51(6):388-393.

    HE X H, XIE W T. Several test methods of fatigue limits of metalic materials[J]. Physical Testing and Chemical Analysis (Part A:Physical Testing), 2015,51(6):388-393.
    [6]
    鲍蕊,张建宇,陈勃,等.试验测定DFR的升降法方法[J].北京航空航天大学学报,2004,30(1):47-50.

    BAO R,ZHANG J Y,CHEN B, et al. Up and down method for DFR testing[J]. Journal of Beijing University of Aeronautics and Astronautics,2004,30(1):47-50.
    [7]
    陈玲,周俊.疲劳极限升降法中应力增量选取的讨论[J].天津理工学院学报,1999(3):55-58.

    CHEN L, ZHOU J. The selection of stress increment in up-down method for fatigue limit[J]. Journal of Tianjin Institute of Technology,1999(3):55-58.
    [8]
    傅惠民,殷刚.确定疲劳极限的极小样本方法[J].机械强度,1999,21(2):115-117.

    FU H M,YIN G. A method for determining fatigue limits with small samples[J]. Journal of Mechanical strength, 1999,21(2):115-117.
    [9]
    梁美训, 傅惠民.以最大或然估计量作为随机变量的半子样升降法[J].固体力学学报, 1986(4):383-387.

    LIANG M X, FU H M. A semi-subsample lifting method with the largest probabilistic estimator as a random variable[J]. Journal of Solid Mechanics, 1986(4):383-387.
    [10]
    房永强,杨军红,郑晓斐.TC4棒材室温疲劳寿命测定及S-N曲线的建立[J].中国新技术新产品,2017(21):10-11.

    FANG Y Q, YANG J H, ZHENG X F. Determination of fatigue life of TC4 bar at room temperature and establishment of S-N curve[J]. New Technology and New Products in China, 2017(21):10-11.
    [11]
    边新孝,王小群,谈嘉祯.用三参数威布尔分布求升降法试验的疲劳极限[J].机械设计与制造,2002(1):4. BIAN X X, WANG X Q, TAN J Z. The determination of fatigue stress limits estimated by Weibull distribution of three-parameters in up-down test[J]. Mechinery Design & Manufacture, 2002(1):4.
    [12]
    曾珊,凌树森.关于材料疲劳强度分布函数的实例分析[J].机械强度,1989,11(1):57-60.

    ZENG S, LING S S. An example analysis of material fatigue strength distribution function[J]. Journal of Mechanical Strength, 1989,11(1):57-60.
    [13]
    高镇同, 傅惠民.疲劳强度的频率分布和疲劳强度特征函数[J].机械强度,1985(2):29-36.

    GAO Z T, FU H M. Frequency distribution of fatigue strength and characteristic function of fatigue strength[J]. Journal of Mechanical Strength, 1985(2):29-36.

Catalog

    Article views (3) PDF downloads (2) Cited by()

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return