Finite Element Simulation of Temperature Rise and Strain of AISI1015 SteelWorkpiece During Mini Mill Rolling

XU Leqian; GAO Yubo; MENG Xiaoling

doi:10.11973/jxgccl202102014

Materials and Mechanical Engineering > 2021 > 45(2): 78-84. > DOI: 10.11973/jxgccl202102014

XU Leqian, GAO Yubo, MENG Xiaoling. Finite Element Simulation of Temperature Rise and Strain of AISI1015 SteelWorkpiece During Mini Mill Rolling[J]. Materials and Mechanical Engineering, 2021, 45(2): 78-84. DOI: 10.11973/jxgccl202102014

Citation:

PDF (6123 KB)

Finite Element Simulation of Temperature Rise and Strain of AISI1015 SteelWorkpiece During Mini Mill Rolling

Zenith Steel Group Co., Ltd., Changzhou 213000, China

More Information

Received Date: March 16, 2020
Revised Date: January 11, 2021

Graphical Abstract

Abstract

Abstract

A mini mill rolling model was established with Deform software and then was used to simulate temperature rise and strains of the AISI1015 steel workpiece with different specifications (φ8 mm, φ10 mm, φ13 mm) and different initial temperatures (800, 850, 900, 950 ℃) during the rolling process. The reason for the difference in rolling temperature rise was analyzed. The results show that the relative errors were within 13% between the mini mill rolling model simulation and the test results of the surface temperature of the workpiece when exiting the rolling mill. During the rolling process, the temperature rise and accumulated equivalent strains in the core of the workpiece were the largest, and the smaller the rolling specification, the greater the temperature rise and strain in the core. The lower the initial temperature of the workpiece, the greater the temperature rise and the torque. The uneven temperature rise of the workpiece with different specifications was mainly caused by the uneven distribution of equivalent strains; the obvious difference of the temperature rise in the core at different initial temperatures was caused by different rolling loads.
- temperature rise,
- strain,
- finite element simulation,
- mini mill

FullText(HTML)

References (13)

References

[1]	何纯玉, 李建超, 赵宪明, 等. 高速线材轧制过程的温度场分析[J]. 黄金学报, 2001(2):104-106. HE C Y, LI J C, ZHAO X M, et al. Analysis on temperature field of rolling process of high speed wire[J]. Gold Journal, 2001(2):104-106.
[2]	余万华, 陈龙, 周斌斌, 等. 高速线材加热轧制及冷却综合工艺参数模型开发[J]. 中国冶金, 2011, 21(4):8-11. YU W H, CHEN L, ZHOU B B, et al. Development of integrated reheating, rolling and cooling models for Stelmor production line[J]. China Metallurgy, 2011, 21(4):8-11.
[3]	周民, 陈莹卷, 马靳江, 等. 高速线材减定径机组轧件热变形研究[J]. 轧钢, 2013, 30(2):31-34. ZHOU M, CHEN Y J, MA J J, et al. Research on workpiece hot deformation on reducing and sizing mill of high-speed wire rods[J]. Steel Rolling, 2013, 30(2):31-34.
[4]	赵德文, 白雪峰, 王晓文, 等. 热线理论计算线材精轧机组的温升[J]. 钢铁, 2006, 41(10):42-45. ZHAO D W, BAI X F, WANG X W, et al. Calculation of temperature rise in wire finish rolling mills by heat line theory[J]. Iron & Steel, 2006, 41(10):42-45.
[5]	宋强, 倪达. 热机轧制对中碳冷镦钢组织和性能的影响[J]. 中国冶金, 2007, 17(2):5-7. SONG Q, NI D. Effect of TMCP on structure and performance of middle carbon cold heading steel[J]. China Metallurgy, 2007, 17(2):5-7.
[6]	李红斌, 徐树成, 邢满江, 等. 用Gleeble3500测塑性功转热系数的研究[J]. 河北联合大学学报(自然科学版), 2012, 34(1):10-13. LI H B, XU S C, XING M J, et al. Study on conversion coefficient of plastic work to heat with Gleeble3500[J]. Journal of Hebei United University (Natural Science Edition), 2012, 34(1):10-13.
[7]	曹杰, 刘雅政, 阎军, 等. 不同规格高速线材减定径轧制变形和温度分析[J]. 精密成形工程, 2010, 2(2):56-59. CAO J, LIU Y Z, YAN J, et al. Analysis on deformation and temperature of different size of high-speed wire and rod during reducing and sizing rolling[J]. Journal of Netshape Forming Engineering, 2010, 2(2):56-59.
[8]	刘雅政, 孙景宏, 李志强, 等. 有效控制产品质量的轧制技术[J]. 轧钢, 2003, 20(3):19-22. LIU Y Z, SUN J H, LI Z Q, et al. Steel rolling technique with effective control for product quality[J]. Steel Rolling, 2003, 20(3):19-22.
[9]	杨理诚, 刘波, 刘利峰, 等. 基于线材轧制成型的三维热力耦合弹塑性有限元研究[J]. 机械科学与技术, 2006, 25(3):313-316. YANG L C, LIU B, LIU L F, et al. Research on 3-D thermal-mechanical coupled elastoplastic FEM based on rolling molding for wire rods[J]. Mechanical Science and Technology, 2006, 25(3):313-316.
[10]	张德志, 萧纪美. 金属材料在高速形变条件下的温升所引起的效应[J]. 材料科学与工程, 1997, 15(2):67-69. ZHANG D Z, XIAO J M. Effect of rising temperature on metallic materials at a high speed load[J]. Materials Science and Engineering, 1997, 15(2):67-69.
[11]	谢英杰, 赵德文, 韩立涛, 等. 高速线材精轧的等效应变研究及温升计算[J]. 钢铁, 2009, 44(1):47-50. XIE Y J, ZHAO D W, HAN L T, et al. Research on effective strain in wire rod during rolling and calculation of temperature jump[J]. Iron & Steel, 2009, 44(1):47-50.
[12]	龚殿尧, 徐建忠, 薛文颖, 等. 负荷分配对精轧带钢温度的影响[J]. 钢铁研究学报, 2006, 18(6):22-25. GONG D Y, XU J Z, XUE W Y, et al. Effect of load distribution on strip steel temperature in finish rolling process[J]. Journal of Iron and Steel Research,2006,18(6):22-25.
[13]	孙本荣, 赵佩祥, 朱荣林, 等. 控制轧制中板变形抗力的研究[J]. 钢铁, 1986, 21(4):30-35. SUN B R, ZHAO P X, ZHU R L, et al. Study on deformation resistance during plate controlled rolling[J]. Iron & Steel, 1986, 21(4):30-35.

Cited By

Get Citation

PDF

XML

Article views (6) PDF downloads (2)

Turn off MathJax

Article Contents

Abstract

References

Finite Element Simulation of Temperature Rise and Strain of AISI1015 SteelWorkpiece During Mini Mill Rolling

Abstract

References

Catalog

Export File

Citation

Format

Content