Microstructure, Tensile Properties and Micromorphology EvolutionDuring Tensile of 22MnB5 Steel after Hot Stamping

YUAN Changwang; HUANG Jiajin; ZHONG Huilong; LI Shengci

doi:10.11973/jxgccl202105008

Materials and Mechanical Engineering > 2021 > 45(5): 45-49. > DOI: 10.11973/jxgccl202105008

YUAN Changwang, HUANG Jiajin, ZHONG Huilong, LI Shengci. Microstructure, Tensile Properties and Micromorphology EvolutionDuring Tensile of 22MnB5 Steel after Hot Stamping[J]. Materials and Mechanical Engineering, 2021, 45(5): 45-49. DOI: 10.11973/jxgccl202105008

Citation:

PDF (4308 KB)

Microstructure, Tensile Properties and Micromorphology EvolutionDuring Tensile of 22MnB5 Steel after Hot Stamping

Faculty of Materials Metallurgy and Chemistry, Jiangxi University of Science and Technology, Ganzhou 341000, China

More Information

Received Date: June 14, 2020
Revised Date: April 01, 2021

Graphical Abstract

Abstract

Abstract

The microstructure and tensile properties of 22MnB5 steel before and after hot stamping at 890 ℃ were studied and compared. The micromorphology evolution during uniaxial tensile of the test steel after hot stamping was investigated by in-situ tensile tests. The results show that the microstructure of the test steel before hot stamping was composed of ferrite and pearlite. After hot stamping, the microstructure changed to martensite, and the strength and the volume of strength and plasticity of the steel increased, while the plasticity decreased. During tensile, the test steel first underwent necking, then the original austenite grain boundaries were destroyed, leading to the initiation of microcracks, and the hole-type cracks were formed by debonding of inclusions. As the tensile continued, the cracks propagated and connected to each other, resulting in the fracture of the steel. A large number of dimples were observed on the tensile fracture surface of the hot stamped test steel, and the fracture form was microvoid coalescence fracture.
- hot stamping steel,
- in-situ tensile,
- crack propagation,
- martensite

FullText(HTML)

References (15)

References

[1]	杨洪林,张深根,洪继要,等.22MnB5热冲压钢的研究进展[J].锻压技术,2014,39(1):1-5. YANG H L,ZHANG S G,HONG J Y,et al.Development research on 22MnB5 hot stamping steel[J].Forging & Stamping Technology,2014,39(1):1-5.
[2]	薛克敏,孙大智,李萍,等.22MnB5超高强钢热冲压成形工艺及试验[J].中国机械工程,2017,28(12):1498-1503. XUE K M,SUN D Z,LI P,et al.Hot stamping forming processes and experiments of 22MnB5 ultra-high strength steels[J].China Mechanical Engineering,2017,28(12):1498-1503.
[3]	薛戬.热成型技术的应用现状和发展趋势[J].汽车工艺与材料,2018(11):25-31. XUE J.Application status and development trend of thermal forming technology[J].Automobile Technology & Material,2018(11):25-31.
[4]	姜超,单忠德,庄百亮,等.热冲压成形22MnB5钢板的组织和性能[J].材料热处理学报,2012,33(3):78-81. JIANG C,SHAN Z D,ZHUANG B L,et al.Microstructure and properties of hot stamping 22MnB5 steel[J].Transactions of Materials and Heat Treatment,2012,33(3):78-81.
[5]	杨柳,费炜杰,吴健敏,等.热处理工艺对22MnB5车用超高强度马氏体钢的组织性能影响[J].现代冶金,2017,45(6):8-10. YANG L,FEI W J,WU J M,et al.Effect of heat treatment process on microstructure and properties of ultra-high strength martensitic steel 22MnB5 for automotive[J].Modern Metallurgy,2017,45(6):8-10.
[6]	BAMBACH M,BUHL J,HART-RAWUNG T,et al.Towards virtual deformation dilatometry for the design of hot stamping process[J].Procedia Engineering,2017,207:1821-1826.
[7]	MERKLEIN M,LECHLER J.Investigation of the thermo-mechanical properties of hot stamping steels[J].Journal of Materials Processing Technology,2006,177(1/2/3):452-455.
[8]	TURETTA A,BRUSCHI S,GHIOTTI A.Investigation of 22MnB5 formability in hot stamping operations[J].Journal of Materials Processing Technology,2006,177(1/2/3):396-400.
[9]	GUO E Y,WANG M Y,JING T,et al.Temperature-dependent mechanical properties of an austenitic-ferritic stainless steel studied by in situ tensile loading in a scanning electron microscope (SEM)[J].Materials Science and Engineering:A,2013,580:159-168.
[10]	宇文龙,李声慈,康永林.780 MPa级热镀锌冷轧双相钢断裂过程的原位观察[J].中南大学学报(自然科学版),2016,47(10):3341-3346. YUWEN L,LI S C,KANG Y L.In-situ observation of fracture process for 780 MPa grade galvanized cold rolled dual phase steel[J].Journal of Central South University (Science and Technology),2016,47(10):3341-3346.
[11]	ZHAO Y G,TAN Y B,JI X M,et al.In situ study of cementite deformation and its fracture mechanism in pearlitic steels[J].Materials Science and Engineering:A,2018,731:93-101.
[12]	江海涛,米振莉,唐荻,等.TWIP钢拉伸变形过程中微观组织的原位观察[J].材料工程,2008,36(1):38-41. JIANG H T,MI Z L,TANG D,et al. In-situ observation of microstructure in TWIP steel during tensile deformation[J].Journal of Materials Engineering,2008,36(1):38-41.
[13]	仝珂,卫尊义,朱丽霞,等.夹杂物特征参数对拉伸载荷下X80管线钢中裂纹萌生及扩展影响的原位观测[J].钢铁,2012,47(5):64-68. TONG K,WEI Z Y,ZHU L X,et al.SEM in situ observation for influence of characteristic inclusion parameters on crack initiation and propagation in X80 pipeline steel under tensile load[J].Iron & Steel,2012,47(5):64-68.
[14]	HADDAD M,IVANISENKO Y,COURTOIS-MANARA E,et al. In-situ tensile test of high strength nanocrystalline bainitic steel[J].Materials Science and Engineering:A,2015,620:30-35.
[15]	ZHAO P J,CHEN Z H,DONG C F.Failure analysis based on microvoids damage model for DP600 steel on in situ tensile tests[J].Engineering Fracture Mechanics,2016,154:152-168.

Cited By

Get Citation

PDF

XML

Article views (4) PDF downloads (2)

Turn off MathJax

Article Contents

Abstract

References

Microstructure, Tensile Properties and Micromorphology EvolutionDuring Tensile of 22MnB5 Steel after Hot Stamping

Abstract

References

Catalog

Export File

Citation

Format

Content