- 中文核心期刊
- CSCD中国科学引文数据库来源期刊
- 中国科技核心期刊
- 中国机械工程学会材料分会会刊
| Citation: |
MA Xiaojie, FAN Wei, FENG Yunli, LI Jie. Effect of Annealing Temperature on Microstructure and Tensile Properties of Fe-0.4C-2Mn-4Al High Strength Steel[J]. Materials and Mechanical Engineering, 2024, 48(12): 19-24. DOI: 10.11973/jxgccl230367
|
Fe-0.4C-2Mn-4Al high strength steel was prepared by vacuum induction furnace melting, hot rolling, cold rolling and annealing processes. The influence of annealing temperature (650, 700, 750, 800 °C) on its microstructure and tensile properties was studied. The results show that the microstructure type of test steel after annealing at different temperatures was basically the same as those of the hot-rolled and cold-rolled test steel, all consisting of δ-ferrite, α-ferrite, cementite and fine κ-type carbides. As the annealing temperature increased, the δ-ferrite strips gradually disappeared and its degree of recrystallization increased, the grain size of α-ferrite increased, and the amount of carbides decreased. The distribution of α-ferrite and cementite was the most uniform after annealing at 750 ℃. The tensile curves of the test steel after annealing at different temperatures showed no obvious yield plateau, indicating that the test steel underwent continuous and uniform plastic deformation. With the increase of annealing temperature, the tensile strength and yield strength of the test steel showed an overall decreasing trend, and the percentage elongation after fracture increased. When the annealing temperature was 750 °C, the product of strength and ductility of the test steel was the largest, which was 14.28 GPa · %, and the work hardening ability was the best; the test steel had the best comprehensive performance.
| [1] |
ZHAO J W ,JIANG Z Y. Thermomechanical processing of advanced high strength steels[J]. Progress in Materials Science,2018,94：174-242.
|
| [2] |
YOSHIMASA F ,YASUNOBU N. High strength steel sheets for weight reduction of automobiles[J]. JFE Techinque Report,2018,41（2）：1-8.
|
| [3] |
康永林,丁波,陈其安. 我国轧制学科发展现状与趋势分析及展望[J]. 轧钢,2017,34（6）：1-9.
KANG Y L ,DING B ,CHEN Q A. Analysis and prospect of developing status and trends of rolling discipline in China[J]. Steel Rolling,2017,34（6）：1-9.
|
| [4] |
ZHOU N P ,SONG R B ,LI X ,et al. Dependence of austenite stability and deformation behavior on tempering time in an ultrahigh strength medium Mn TRIP steel[J]. Materials Science and Engineering：A,2018,738：153-162.
|
| [5] |
韩志勇,张明达,徐海峰,等. 高性能汽车钢组织性能特点及未来研发方向[J]. 钢铁,2016,51（2）：1-9.
HAN Z Y ,ZHANG M D ,XU H F ,et al. Research and application of high performance automobile steel[J]. Iron & Steel,2016,51（2）：1-9.
|
| [6] |
SOHN S S ,LEE B J ,LEE S ,et al. Effects of aluminum content on cracking phenomenon occurring during cold rolling of three ferrite-based lightweight steel[J]. Acta Materialia,2013,61（15）：5626-5635.
|
| [7] |
邢梅,林方敏,唐立志,等. Al元素对Fe-Mn-Al-C系低密度钢的影响特性综述[J]. 中国冶金,2022,32（2）：15-26.
XING M ,LIN F M ,TANG L Z ,et al. Effect of Al on properties of Fe-Mn-Al-C low density steel[J]. China Metallurgy,2022,32（2）：15-26.
|
| [8] |
LI Z C ,ZHANG X T ,MOU Y J ,et al. The impact of intercritical annealing in conjunction with warm deformation process on microstructure,mechanical properties and TRIP effect in medium-Mn TRIP steels[J]. Materials Science and Engineering：A,2019,746：363-371.
|
| [9] |
MOU Y J ,LI X J ,LI Z C ,et al. Elevation of impact toughness of medium-manganese trip-steel 0.2% C-6%Mn-3% Al due to evolution of microstructure under heat treatment[J]. Metal Science and Heat Treatment,2021,63（1/2）：26-33.
|
| [10] |
LI Z C ,LI X J ,MOU Y J ,et al. The significance of microstructural evolution on governing impact toughness of Fe-0.2C-6Mn-3Al medium-Mn TRIP steel studied by a novel heat treatment[J]. International Journal of Materials Research,2021,112（4）：271-279.
|
| [11] |
刘春泉,彭其春,薛正良,等. Fe-Mn-Al-C系列低密度高强钢的研究现状[J]. 材料导报,2019,33（15）：2572-2581.
LIU C Q ,PENG Q C ,XUE Z L ,et al. Research situation of Fe-Mn-Al-C system low-density high-strength steel[J]. Materials Reports,2019,33（15）：2572-2581.
|
| [12] |
YI H L ,LEE K Y ,LIM J H ,et al. Spot weldability of δ-TRIP steel containing 0.4 wt-%C[J]. Science and Technology of Welding and Joining,2010,15（7）：619-624.
|
| [13] |
宋宏伟,李慧蓉,高建新,等. 合金元素对Fe-Mn-Al-C系轻质钢组织和性能影响的研究现状[J]. 热加工工艺,2019,48（6）：19-22.
SONG H W ,LI H R ,GAO J X ,et al. Research status on effect of alloying elements on microstructure and properties of Fe-Mn-Al-C based lightweight steel[J]. Hot Working Technology,2019,48（6）：19-22.
|
| [14] |
杨丽芳,魏焕君,孙力,等. 退火温度对冷轧中锰钢组织性能和断裂行为的影响[J]. 钢铁,2019,54（11）：80-87.
YANG L F ,WEI H J ,SUN L ,et al. Effect of annealing temperatures on microstructures,mechanical properties and fracture behavior of a cold-rolled medium-Mn steel[J]. Iron & Steel,2019,54（11）：80-87.
|
| [15] |
余鹏飞,胡钱钱,夏培康,等. Fe15Mn0.8C-Al-Si热轧轻质高强钢的组织与性能[J]. 上海金属,2017,39（1）：33-37.
YU P F ,HU Q Q ,XIA P K ,et al. Microstructure and mechanical properties of hot rolled Fe15Mn0.8C-Al-Si light-weight high strength steel[J]. Shanghai Metals,2017,39（1）：33-37.
|
| [16] |
严玲,唐荻,米振莉,等. 不同加工工艺对高强高塑性TWIP钢组织与性能的影响[J]. 热加工工艺,2005,34（8）：15-17.
YAN L ,TANG D ,MI Z L ,et al. Effect of working processes on microstructure and mechanical property of TWIP steel with high strength and high plasticity[J]. Hot Working Technology,2005,34（8）：15-17.
|
| [17] |
王宇辰,冯运莉,郭雪霏. Mn含量对Mn-Al系TRIP钢组织和力学性能的影响[J]. 华北理工大学学报（自然科学版）,2019,41（2）：31-36.
WANG Y C ,FENG Y L ,GUO X F. Effect of Mn content on microstructure and mechanical properties of Mn-Al TRIP steel[J]. Journal of North China University of Science and Technology（Natural Science Edition）,2019,41（2）：31-36.
|
| [18] |
CHOI K ,SEO C H ,LEE H ,et al. Effect of aging on the microstructure and deformation behavior of austenite base lightweight Fe-28Mn-9Al-08C steel[J]. Scripta Materialia,2010,63（10）：1028-1031.
|
| [19] |
YOO J D ,PARK K T. Microband-induced plasticity in a high Mn-Al-C light steel[J]. Materials Science and Engineering：A,2008,496（1/2）：417-424.
|
| [20] |
PARK K T. Tensile deformation of low-density Fe-Mn-Al-C austenitic steels at ambient temperature[J]. Scripta Materialia,2013,68（6）：375-379.
|
| [21] |
谢钊远,林关强,王定峰,等. Fe-C-Mn-Si-Al双相钢两相区加热过程中的奥氏体相变行为研究[J]. 热加工工艺,2024,53（17）：127-130.
XIE Z Y ,LIN G Q ,WANG D F ,et al. Research on austenite transformation behavior of Fe-C-Mn-Si-Al dual-phase steel during heating in two-phase region[J]. Hot Working Technology,2024,53（17）：127-130.
|
| [22] |
卢云,高杰,刘剑辉. 基于热加工图的双相不锈钢热成形机制及工艺优化[J]. 上海金属,2023,45（1）：58-67.
LU Y ,GAO J ,LIU J H. Hot forming mechanism and process optimization of duplex stainless steel based on hot working map[J]. Shanghai Metals,2023,45（1）：58-67.
|
| [23] |
HAN D ,XU Y ,LIU R ,et al. Improving Mn partitioning and mechanical properties through carbides-enhancing pre-annealing in Mn-reduced transformation-induced plasticity steel[J]. Scripta Materialia,2020,187：274-279.
|
| [24] |
LIU G L ,LIU K ,ZHANG M H ,et al. Effect of cold rolling reduction ratio on microstructure and mechanical properties of Fe-10Mn-4Al-0.4C steel containing δ ferrite[J]. Materials Science and Engineering：A,2023,867：144715.
|
| [25] |
LI M ,YIN T ,WANG Y ,et al. Study of biocompatibility of medical grade high nitrogen nickel-free austenitic stainless steel in vitro[J]. Materials Science and Engineering：C,2014,43：641-648.
|
Supported by: Beijing Renhe Information Technology Co., Ltd. 
DownLoad: