- 中文核心期刊
- CSCD中国科学引文数据库来源期刊
- 中国科技核心期刊
- 中国机械工程学会材料分会会刊
| Citation: |
JIA Qi, DU Dongxing, KONG Jinxing, LIU Silai, PENG Zhaobo, YANG Quanwei. Effect of Ultrasonic Rolling Process Parameters on Surface Integrity and Impact Performance of 45 Steel[J]. Materials and Mechanical Engineering, 2024, 48(10): 28-34. DOI: 10.11973/jxgccl230504
|
Ultrasonic rolling orthogonal tests were designed with static pressure (400, 800, 1 200 N), amplitude (3, 5, 7 μm), rolling pass (1, 2, 3) as variables, surface roughness, residual stress, microhardness and impact absorption work as response. The effect of ultrasonic rolling parameters on the surface integrity and impact properties of 45 steel was studied. The results show that with the increase of static pressure and amplitude, the surface roughness of the sample increased,and the effect of rolling pass was small. With the increase of static pressure, amplitude and rolling pass, the surface residual compressive stress of the sample increased slightly. The depth of hardened layer increased with the increase of static pressure and amplitude, and first decreased and then increased with the increase of rolling pass. The impact absorption work first decreased and then increased with the increase of static pressure and amplitude, and increased with the increase of rolling pass. The most influential factors of surface roughness, surface residual stress, hardened layer depth and impact absorption work were amplitude, static pressure, static pressure and rolling pass, respectively. The optimum ultrasonic rolling parameters were as follows: static pressure of 400 N, amplitude of 7 μm, rolling pass of 3. Under the eptimal parameters, the gray correlation degree of the sample was the largest, and the surface integrity and impact performance were good.
| [1] |
刘明涛,汤铁钢. 爆炸加载下金属壳体膨胀断裂过程中的关键物理问题[J]. 爆炸与冲击,2021,41（1）：11-22.
LIU M T ,TANG T G. Key physical problems in the expanding fracture of explosively driven metallic shells[J]. Explosion and Shock Waves,2021,41（1）：11-22.
|
| [2] |
叶想平,李英雷,张祖根. 45钢薄壁圆柱管的冲击膨胀断裂机理研究[J]. 爆炸与冲击,2014,34（3）：322-327.
YE X P ,LI Y L ,ZHANG Z G. Mechanism of expanding fracture of 45 steel cylinder shells driven by modified SHPB[J]. Explosion and Shock Waves,2014,34（3）：322-327.
|
| [3] |
魏琦,贾云飞,杨晓峰,等. 表面超声滚压及渗氧复合强化对纯钛断裂韧性的影响[J]. 压力容器,2022,39（5）：16-25.
WEI Q ,JIA Y F ,YANG X F ,et al. Effects of ultrasonic surface rolling process and combined oxygen boost diffusion treatment on fracture toughness of pure titanium[J]. Pressure Vessel Technology,2022,39（5）：16-25.
|
| [4] |
王兴刚超声波滚压光整加工技术研究沈阳东北大学2015王兴刚. 超声波滚压光整加工技术研究[D]. 沈阳：东北大学,2015.
WANG X GResearch on ultrasonic rolling finishing technologyShenyangNortheastern University2015WANG X G. Research on ultrasonic rolling finishing technology[D]. Shenyang：Northeastern University,2015.
|
| [5] |
唐洋洋,李林波,王超,等. 超声表面滚压纳米化技术研究现状[J]. 表面技术,2021,50（2）：160-169.
TANG Y Y ,LI L B ,WANG C ,et al. Research status of USRP nanocrystallization technology[J]. Surface Technology,2021,50（2）：160-169.
|
| [6] |
ZHANG K M ,LIU Y X ,LIU S ,et al. Coordinated bilateral ultrasonic surface rolling process on aero-engine blades[J]. The International Journal of Advanced Manufacturing Technology,2019,105（10）：4415-4428.
|
| [7] |
ZHANG Q L ,HU Z Q ,SU W W ,et al. Microstructure and surface properties of 17-4PH stainless steel by ultrasonic surface rolling technology[J]. Surface and Coatings Technology,2017,321：64-73.
|
| [8] |
YE H ,SUN X ,LIU Y ,et al. Effect of ultrasonic surface rolling process on mechanical properties and corrosion resistance of AZ31B Mg alloy[J]. Surface and Coatings Technology,2019,372：288-298.
|
| [9] |
WANG Z ,XIAO Z Y ,HUANG C S ,et al. Influence of ultrasonic surface rolling on microstructure and wear behavior of selective laser melted Ti-6Al-4V alloy[J]. Materials,2017,10（10）：1203.
|
| [10] |
REN K ,YUE W ,ZHANG H Y. Surface modification of Ti6Al4V based on ultrasonic surface rolling processing and plasma nitriding for enhanced bone regeneration[J]. Surface and Coatings Technology,2018,349：602-610.
|
| [11] |
ZHANG Y L ,LAI F Q ,QU S G ,et al. Effect of ultrasonic surface rolling on microstructure and rolling contact fatigue behavior of 17Cr2Ni2MoVNb steel[J]. Surface and Coatings Technology,2019,366：321-330.
|
| [12] |
LI L ,KIM M ,LEE S ,et al. Influence of multiple ultrasonic impact treatments on surface roughness and wear performance of SUS301 steel[J]. Surface and Coatings Technology,2016,307：517-524.
|
| [13] |
耿纪龙,闫志峰,张红霞,等. 超声表面滚压处理对AZ31B镁合金组织和性能的影响[J]. 表面技术,2022,51（1）：368-375.
GENG J L ,YAN Z F ,ZHANG H X ,et al. Effect of ultrasonic surface rolling treatment on the structure and properties of AZ31B magnesium alloy[J]. Surface Technology,2022,51（1）：368-375.
|
| [14] |
陈蔚清,徐观明,崔紫依,等. 超声滚压处理7B85合金的显微组织和力学性能[J]. 有色金属科学与工程,2021,12（6）：80-87.
CHEN W Q ,XU G M ,CUI Z Y ,et al. Microstructure and mechanical properties of 7B85 alloy ultrasonic rolling treated 7B85 alloy[J]. Nonferrous Metals Science and Engineering,2021,12（6）：80-87.
|
| [15] |
屈盛官,吴志兵,张亚龙,等. 超声表面滚压加工对20CrMoH钢摩擦磨损性能的影响[J]. 表面技术,2022,51（2）：211-222.
QU S G ,WU Z B ,ZHANG Y L ,et al. Effect of ultrasonic surface rolling on friction and wear properties of 20CrMoH steel[J]. Surface Technology,2022,51（2）：211-222.
|
| [16] |
张飞,赵运才. 超声表面滚压处理对45钢摩擦学性能的影响及机理[J]. 机械工程材料,2017,41（8）：44-48.
ZHANG F ,ZHAO Y C. Influence of ultrasonic surface rolling processing on tribological performance of 45 steel and its mechanism[J]. Materials for Mechanical Engineering,2017,41（8）：44-48.
|
| [17] |
DANG J Q ,AN Q L ,LIAN G H ,et al. Surface modification and its effect on the tensile and fatigue properties of 300M steel subjected to ultrasonic surface rolling process[J]. Surface and Coatings Technology,2021,422：127566.
|
| [18] |
WANG P C ,PAN Y Z ,LIU Y J ,et al. Research on surface properties of Ti-6Al-4V alloy by multi-ultrasonic rolling[J]. Proceedings of the Institution of Mechanical Engineers,Part C：Journal of Mechanical Engineering Science,2021,235（21）：5594-5602.
|
| [19] |
DANG J Q ,ZHANG H ,AN Q L ,et al. Surface integrity and wear behavior of 300M steel subjected to ultrasonic surface rolling process[J]. Surface and Coatings Technology,2021,421：127380.
|
| [20] |
CHENG Y J ,WANG Y S ,WANG Z J ,et al. Ultrasonic surface rolling strengthening and its parameter optimization on bearing raceway[J]. Materials and Design,2023,232：112156.
|
Supported by: Beijing Renhe Information Technology Co., Ltd. 
DownLoad: