| Citation: |
GU Yanglang, ZHAO Yuncai, SUN Jiachen, ZOU Yaoping, WAN Shaochen. Effects of Rare Earth Mixed Nanoparticles Modification on Mechanical and Tribological Properties of Phenolic Resin-Based Friction Materials[J]. Materials and Mechanical Engineering, 2024, 48(10): 71-77. DOI: 10.11973/jxgccl230506
|
The rare earth CeO2 (1.0%, 1.5%, 2.0%) and Y2O3 (1.0%, 1.5%, 2.0%) mixed Nano-SiO2 (2.0%, 3.0%, 4.0%) with different mass fraction modified phenolic resin-based friction material was prepared. The formula was designed through orthogonal tests, and the effects of the modified material on mechanical properties and friction and wear properties were studied by combining range analysis. The optimal addition was obtained. The wear mechanism of modified friction material was analyzed. The results show that the rare earth CeO2 and Y2O3 mixed Nano-SiO2 modification significantly improved the mechanical properties and friction and wear properties of the friction materials. The Rockwell hardness of the rare earth CeO2 and Y2O3 mixed Nano-SiO2 modified friction material was 62–78 HRL, and the shear strength was 31.4–34.5 MPa. The optimal mass fraction of CeO2, Y2O3 and Nano-SiO2 was 2.0%, 2.0% and 3.0%, respectively. In this case, the wear rate of the sample at the medium temperature stage (200–250 ℃) was small and stable, the friction coefficient and hardness was large, and the shear strength reached maximum. Under the optimal addition, the packing structure in sample was evenly distributed, small in size, and firmly bonded with the resin matrix. The graphite formed a continuous friction platform. The shear section presented an irregular tearing shape, and there were many smooth areas in the wear surface, without obvious soratches and grooves. The wear mechanism of the modified friction material at the medium temperature stage was mainly thermal fatigue wear and abrasive wear.
| [1] |
CHAN D ,STACHOWIAK G W. Review of automotive brake friction materials[J]. Proceedings of the Institution of Mechanical Engineers,Part D：Journal of Automobile Engineering,2004,218（9）：953-966.
|
| [2] |
徐祥,杨明. 有机复合摩擦材料及其研究现状[J]. 材料导报,2015,29（21）：81-86.
XU X ,YANG M. Research situation of the organic brake friction materials[J]. Materials Reports,2015,29（21）：81-86.
|
| [3] |
申荣华,何林. 摩擦材料及其制品生产技术[M]. 北京：北京大学出版社,2010.
SHEN R H ,HE L. Production technology of friction materials and their products[M]. Beijing：Peking University Press,2010.
|
| [4] |
KUMAR K N ,SUMAN K N S. Review of brake friction materials for future development[J]. Journal of Mechanical and Mechanics Engineering,2017,3（2）：1-2.
|
| [5] |
王艳志,马勤,冯辉霞. 酚醛树脂的复合改性研究进展[J]. 应用化工,2009,38（2）：286-288.
WANG Y Z ,MA Q ,FENG H X. Development of phenolic resin modified compositely[J]. Applied Chemical Industry,2009,38（2）：286-288.
|
| [6] |
CONG P H ,WANG H Q ,WU X Y ,et al. Braking performance of an organic brake pad based on a chemically modified phenolic resin binder[J]. Journal of Macromolecular Science,Part A,2012,49（6）：518-527.
|
| [7] |
周元康,戴圣海,王满力,等. 酚醛树脂的SiO2纳米复合对摩擦材料性能的影响[J]. 润滑与密封,2006,31（8）：61-64.
ZHOU Y K ,DAI S H ,WANG M L ,et al. Influence on rubing material performance of SiO2 nanometer compounds of phenol aldehyde resin[J]. Lubrication Engineering,2006,31（8）：61-64.
|
| [8] |
武伟红,冷晶晶,王峥,等. 环氧树脂/双酚S硼酚醛树脂/纳米SiO2复合材料的制备[J]. 合成树脂及塑料,2015,32（2）：19-22.
WU W H ,LENG J J ,WANG Z ,et al. Preparation of epoxy/boron-containing bisphenol-S formaldehyde/nano-SiO2 composites[J]. China Synthetic Resin and Plastics,2015,32（2）：19-22.
|
| [9] |
王满力,王佳佳,周元康,等. 纳米坡缕石增强PF复合材料研究[J]. 非金属矿,2008,31（1）：62-64.
WANG M L ,WANG J J ,ZHOU Y K ,et al. Study on PF complex materials reinforced by nano-palygorskite[J]. Non-Metallic Mines,2008,31（1）：62-64.
|
| [10] |
黎明发,范端,孙振亚,等. 高压下制备的累托石/酚醛树脂复合材料微结构和热性能研究[J]. 高压物理学报,2008,22（1）：57-61.
LI M F ,FAN D ,SUN Z Y ,et al. The microstructure and thermal performance of phenolic resin (PF)/rectorite（REC）nanocomposites produced by high pressure method[J]. Chinese Journal of High Pressure Physics,2008,22（1）：57-61.
|
| [11] |
李明天,王娜,魏薇,等. PF/MCM-41纳米复合材料的制备及其耐热性[J]. 材料研究学报,2006,20（3）：314-318.
LI M T ,WANG N ,WEI W ,et al. Preparation and heat-resistance of PF/MCM-41 nanocomposite[J]. Chinese Journal of Materials Research,2006,20（3）：314-318.
|
| [12] |
PENG G G ,ZHENG D Y ,CHENG C ,et al. Effect of rare-earth addition on morphotropic phase boundary and relaxation behavior of the PNN-PZT ceramics[J]. Journal of Alloys and Compounds,2017,693：1250-1256.
|
| [13] |
ZHANG S H ,WANG S X ,HUANG Z H ,et al. A kinetic analysis of thermal decomposition of polyaniline and its composites with rare earth oxides[J]. Journal of Thermal Analysis and Calorimetry,2015,119（3）：1853-1860.
|
| [14] |
方科,任永杰,张洋. 高性能摩阻材料用酚醛树脂[J]. 北京化工大学学报,1999,26（4）：33-35.
FANG K ,REN Y J ,ZHANG Y. Phenolic resin for high-quality friction-material[J]. Journal of Beijing University of Chemical Technology（Natural Science Edition）,1999,26（4）：33-35.
|
| [15] |
林娇,高诚辉,郑开魁,等. 稀土增强树脂基摩擦材料的摩擦磨损性能研究[J]. 润滑与密封,2018,43（4）：53-56.
LIN J ,GAO C H ,ZHENG K K ,et al. Study on friction and wear properties of rare earth reinforced resin-based friction materials[J]. Lubrication Engineering,2018,43（4）：53-56.
|
| [16] |
HE J ,LILLEY C M. Surface effect on the elastic behavior of static bending nanowires[J]. Nano Letters,2008,8（7）：1798-1802.
|
| [17] |
BUFFAT P ,BOREL J P. Size effect on the melting temperature of gold particles[J]. Physical Review A,1976,13（6）：2287-2298.
|
| [18] |
SONG S H ,XU Y W ,CHEN X M ,et al. Effect of rare earth cerium and impurity tin on the hot ductility of a Cr-Mo low alloy steel[J]. Journal of Rare Earths,2016,34（10）：1062-1068.
|
| [19] |
WU C ,YANG K ,CHEN Y ,et al. Investigation of friction and vibration performance of lithium complex grease containing nano-particles on rolling bearing[J]. Tribology International,2021,155：106761.
|
| [20] |
BAHADUR S ,GONG D L. The action of fillers in the modification of the tribological behavior of polymers[J]. Wear,1992,158（1/2）：41-59.
|
Supported by: Beijing Renhe Information Technology Co., Ltd. 
DownLoad: