Citation: | JIANG Wen-juan, ZHONG Wen, ZHANG Xiang-long, GUO-Jun, LIU Qi-yue. The Effect of Rail Hardness on Wear Loss of Wheel-Rail System at Different Axle Loads[J]. Materials and Mechanical Engineering, 2011, 35(6): 80-82. |
[1] |
金学松, 沈志云.轮轨滚动接触疲劳问题研究的最新进展[J].铁道学报, 2001, 23(2):92-108.
|
[2] |
赵雪芹, 王文健, 钟雯.钢轨滚动疲劳裂纹与磨损耦合关系研究[J].铁道学报, 2009, 31(2):84-87.
|
[3] |
CLAYTON P. Predicting the wear of rails on curves from laboratory data[J].Wear, 1995, 181/183(1):11-19.
|
[4] |
DETERS L, PROKSCH M. Friction and wear testing of rail and wheel material[J].Wear, 2005, 258(7/8):981-991.
|
[5] |
CLAYTON P. Tribological aspects of wheel-rail contact: a review of recent experimental research[J].Wear, 1996, 191(1/2):170-183.
|
[6] |
PETER P. High strength rail steels-the importance of material properties in contact mechanics problems[J].Wear, 2008, 265(9/10):1373-1379.
|
[7] |
EADIE D T, ELVIDGE D, OLDKNOW K, et al. The effects of top of rail friction modifier on wear and rolling contact fatigue: Full-scale rail-wheel test rig evaluation, analysis and modeling[J].Wear, 2008, 265(9/10):1222-1230.
|
[8] |
UEDA M, UCHINO K, KOBAYASHI A. Effects of carbon content on wear property in pearlitic steels[J].Wear, 2002, 253(1/2):107-113.
|
[9] |
刘启跃, 王文健.含碳量对车轮材料磨损影响的试验研究[J].润滑与密封, 2005(5):11-13.
|
[10] |
布尚B.摩擦学导论[M].北京: 机械工业出版社, 2007:197.
|