• 中文核心期刊
  • CSCD中国科学引文数据库来源期刊
  • 中国科技核心期刊
  • 中国机械工程学会材料分会会刊
Advanced Search
WANG Peng, CHENG Dong-feng, NIU Ji-tai. Vacuum Brazing with Pressure of High-Volume-Fraction SiCp Reinforced 6063 Al-based Composite[J]. Materials and Mechanical Engineering, 2014, 38(9): 34-38.
Citation: WANG Peng, CHENG Dong-feng, NIU Ji-tai. Vacuum Brazing with Pressure of High-Volume-Fraction SiCp Reinforced 6063 Al-based Composite[J]. Materials and Mechanical Engineering, 2014, 38(9): 34-38.
shu

Vacuum Brazing with Pressure of High-Volume-Fraction SiCp Reinforced 6063 Al-based Composite

More Information
  • Received Date: July 30, 2014
    Graphical Abstract
    • Abstract
  • One soldering paste of aluminum based ball-grinding powders containing 22.3wt.%Cu, 6.1wt.%Si, 1.6wt.%Mg was used to brazing the 60vol.%SiCp/6063Al composite under the brazing condition of 580 ℃, holding for 40 min and pressure of 4 kPa. Via SEM and shearing test, the wetting mechanism of soldering paste on the composite matrix and SiC particles, and the shear fracture morphology and microstructure of soldered joints were investigated. The results reveal that this solder alloy had a good wettability to the composite, the average shear strength was 71.6 MPa because of forming metallurgical bonding and mechanical interlocking respectively by diffusion and mechanical penetration. What′s more, the interface between the solder and the matrix alloy disappeared, and the solder had common wetting on bigger SiC particles for some small gaps between them. The fracture surface indicated the fracture occurred inside the solder alloy and the base material side of the joining interface between the solder and the composite.
    • FullText(HTML)
    • References (20)
  • [1]
    LLOYD D J. Particle reinforced aluminum and magnesium matrix composites［J］.International Materials Reviews,1994,39(1):1-23.
    [2]
    牛济泰,卢金斌,穆云超,等.SiCp/ZL101复合材料与可伐合金4J29钎焊的分析［J］.焊接学报,2010,31(5):37-40.
    [3]
    徐峰.SiC增强铝基复合材料焊接特性及其储能焊［J］.轻合金加工技术,2010,48(4):48-51.
    [4]
    LENG Xue-song, WANG Chang-wen, ZHANG Yang, et al. Strengthening mechanism of ceramic particle reinforced bonds by ultrasonic brazing of AlMMCs ［J］.Tranctions of Nonferrous Metals Society of China,2011,12:290-294.
    [5]
    陈茂爱, 陆皓, 唐逸民.SiCp/LD2Al合金复合材料电弧焊的焊接性［J］.金属学报, 2000, 36(7): 770-774.
    [6]
    LEI Yu-cheng, ZHANG Zhen, NIE Jia-jun, et al. Effect of Ti-Al on microstructures and mechanical properties of plasma arc in-situ welded joint of SiCp/Al MMCs ［J］.Transactions of Nonferrous Metals Society of China,2008,18(4):809-813.
    [7]
    HAN Zong-jie, JU Jin-long, XUE Song-bai, et al. Microstructures of Sn-Ag-Cu lead-free soldered joints with diode-laser soldering ［J］.Journal of Central South University: Science and Technology,2006,37(2):229-234.
    [8]
    李杏瑞, 牛济泰, 杨顺成. SiCp/6061铝基复合材料电阻电焊接头中的缺陷分析［J］.机械工程材料, 2013,37(4):14-16,21.
    [9]
    季小辉, 王少刚, 董桂萍. SiCp/101Al复合材料电子束焊接接头温度场对其显微组织的影响［J］.机械工程材料, 2009,33(5):97-100.
    [10]
    MAITYA J, PALB T K, MAITIC R. Transient liquid phase diffusion bonding of 6061-15wt% SiCp in argon environment ［J］.Journal of Materials Processing Technology,2009,209(7):3568-3580.
    [11]
    张新平, 魏巍, 权高峰.SiCp增强Al基复合材料的真空扩散焊接［J］.金属学报, 1999, 35(2): 198-202.
    [12]
    HUANG Ji-hua, DONG Yue-ling, WAN Yun, et al. Investigation on reactive diffusion bonding of SiCp/6063 MMC by using mixed powders as interlayers［J］.Journal of Materials Processing Technology,2007,190(1/3):312-316.
    [13]
    ZHANG Yang, YAN Jiu-chun, CHEN Xiao-guang, et al. Ultrasonic dissolution of brazing of 55％SiCp/A356 composites［J］.Transactions of Nonferrous Metals Society of China,2010,20(5):746-750.
    [14]
    NIU Ji-tai, LUO Xiang-wei, TIAN Hao, et al. Vacuum brazing of aluminum metal matrix composite (55vol.% SiCP/A356) using aluminum-based filler alloy ［J］.Materials Science and Engineering: B,2012,177(19):1707-1711.
    [15]
    LU Jin-bin, MU Yun-chao, LUO Xiang-wei, et al. A new method for soldering particle-reinforced aluminum metal matrix ［J］.Materials Science and Engineering: B,2012,177(20):1759-1763.
    [16]
    冯波,雷玉成,冯波.铝-钛-镍-硅合金填料对SiCp6061Al基复合材料等离子弧焊接接头组织与性能的影响［J］.机械工程材料, 2010,34(3):23-26.
    [17]
    雷玉成,王志伟,冯波.电弧超声对SiCp/6061Al复合材料等离子弧焊缝组织与接头性能的改善性能［J］.机械工程材料, 2009,33(12):9-11,15.
    [18]
    ALONSO A, PAMIES A, NARCISO J, et al. Evalution of the wettability of liquid aluminium with ceramic particulates(SiC, TiC, Al2O3)by means of pressure infiltration［J］.Metallurgical Transactions: A,1993,24(6):1423-1432.
    [19]
    李杏瑞, 杨涤心, 肖宏滨. 碳化硅铝基复合材料的钎焊［J］.洛阳工学院学报, 2002,23(1):19-22.
    [20]
    ZHANG Gui-fang, SU Wei, ZHANG Jian-xun, et al. Wetting behavior of a novel Al-Si-Ti active filler metal fiol on aluminium matrix composite［J］.Journal of Materials Engineering and Performance,2013,22(7):1982-1994.
    • Related Articles

  • Related Articles

    [1]YAO Yongqiang, LIN Chen, SHEN Jingyi, LIU Jia, XU Huanhuan. Effect of Vacuum Environment and Substrate Preheating on Microstructure and Properties of Laser Cladding WC Reinforced Nickel-Based Alloy Coating[J]. Materials and Mechanical Engineering, 2020, 44(5): 49-53. DOI: 10.11973/jxgccl202005010
    [2]WANG Peng, GAO Zeng, LI Qiang, CHENG Dong-feng, TIAN Jin-feng, NIU Ji-tai. Effects of Copper Plating and Nickel Plating on Shear Strength of Vacuum Brazed Joints of SiCp/6063Al Composites[J]. Materials and Mechanical Engineering, 2015, 39(6): 1-6. DOI: 10.11973/jxgccl201506001
    [3]LIU Hong-tao, WANG Lu-ping, DENG Chang-cheng. Friction and Wear Characteristics of Nickel Plating Coating on Titanium Alloy Surface[J]. Materials and Mechanical Engineering, 2013, 37(2): 46-48.
    [4]YIN Ming-yong, MA Li-qun, WANG Juan, JIN Rong-rong, DING Yi. Technology Improvement of Electroless Plating Ni-P Alloy Coating on SiCP/Al Composite Surface[J]. Materials and Mechanical Engineering, 2012, 36(9): 47-49.
    [5]YU Zhi-shui, SHI Kun, LI Rui-feng. Effect of Brazing Clearance on Microstructure and Properties of Vacuum Brazing Lap Joint of Ni-Based Alloys[J]. Materials and Mechanical Engineering, 2010, 34(7): 5-7.
    [6]BAI Dong-mei, HUANG Ming-liang. Effects of pH Value and Concentration of Solution on P Content and Deposition Rate during Electroless Ni-P Plating on Aluminum Substrate Surface[J]. Materials and Mechanical Engineering, 2010, 34(6): 28-32.
    [7]XU Ting, TAN Ye-fa, LI Hua-bing, TAN Hua, CAI Bin. Effects of Brush Plating Technological Parameters on Microstructure and Wear Resistance of Nickel Coatings[J]. Materials and Mechanical Engineering, 2010, 34(4): 26-28.
    [8]LIANG Xu, LONG Shi-guo, LING Li-zeng, PAN Yong. Stamping Forming Performance of Nickel Plated Steel Strip[J]. Materials and Mechanical Engineering, 2009, 33(7): 26-28.
    [9]SU Yi-xiang, MEN Zhi-hui, HUANG Zhong-jia. Microstructure and Anti-wear Property of a Nickel Base Powder Coating Prepared by Means of Melting in Non-vacuum Stove[J]. Materials and Mechanical Engineering, 2008, 32(5): 45-47.
    [10]DU Chun-kuan, YIN Yan-guo, LIU Kun, ZHENG Zhi-xiang. Surface Globuling and Interfacial Combination with Copper Matrix of Graphite Coated with Nickel[J]. Materials and Mechanical Engineering, 2007, 31(4): 25-28.

Catalog

    Get Citation
    PDF
    XML
    Article views (5) PDF downloads (1) Cited by()
    Turn off MathJax
    Article Contents
    Abstract
    References
    Related Articles

    Materials and Mechanical Engineering

    Address：99 Handan Road, ShanghaiPost Code: 200437

    Tel：021-65556775-368Email:mem@mat-test.com

    沪ICP备17055736号-5

    Supported by: Beijing Renhe Information Technology Co., Ltd.  Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return