Microstructure and Wear Resistance of (Cr,Fe)<sub>7</sub>C<sub>3</sub>/γ-Fe Alloy Cladding Layer Synthetized by VEB

LU Bin-feng; LU Feng-gui; TANG Xin-hua; YAO Shun

Materials and Mechanical Engineering > 2009 > 33(9): 10-12.

LU Bin-feng, LU Feng-gui, TANG Xin-hua, YAO Shun. Microstructure and Wear Resistance of (Cr,Fe)₇C₃/γ-Fe Alloy Cladding Layer Synthetized by VEB[J]. Materials and Mechanical Engineering, 2009, 33(9): 10-12.

Citation:

PDF (868 KB)

Microstructure and Wear Resistance of (Cr,Fe)₇C₃/γ-Fe Alloy Cladding Layer Synthetized by VEB

More Information

Received Date: May 15, 2009

Graphical Abstract

Abstract

Abstract

Cr3C2 and Fe powder mixtures were employed as raw material to prepare on the surface of a low alloy steel substrate with vacuum electron beam scanning.The alloy layer was analyzed by using optical microscopy,XRD,SEM,microhardness tesing and wear resistance testing under dry sliding condition.The results show that the alloy layer had a uniform and refined microstructure.It was mainly composed of eutectic carbide phase and dendritic austenite phase.Microhardness of the layer reached 950-1 050 HV,about 2.6-3.2 times higher than that of the substrate(360 HV).The relative wear resistance of alloy layer was increased 5.2 time of substrate.There were only shallow friction in the worn surface of allooy layer,indicating an abrasive wear mechanism.While there were exfoliations in the worn surface of substrate,indicating adhesive wear.
- surface alloy layer,
- vacuum electron beam(VEB) cladding,
- (Cr,Fe)7C3,
- relative wear resistance

FullText(HTML)

References (7)

References

[1]	MORIMOTO J,SASAKI Y,FUKUHARA S,et al.Surface modification of Cr3C2-NiCr cermet coatings by direct diode laser[J].Vacuum,2006,80(11/12):1400-1405.
[2]	ZHUK H V,KOBRYN P A,SEMIATIN S L.Influence of heating and solidification conditions on the structure and surface quality of electron-beam melted Ti-6Al-4V ingots[J].Journal of Materials Processing Technology,2007,190:387-392.
[3]	LIN Yuan-ching,WANG Shi-wei,LIN Yu-chang.Analysis of microstructure and wear performance of WC-Ti clad layers on steel produced by gas tungsten arc[J].Welding Surface & Coatings Technology,2005,200:2106-2113.
[4]	SINGH A,DAHOTRE N B.Laser in-situ synthesis of mixed carbide coating on steel[J].Journal of Materials Science,2004,39:4553-4560.
[5]	ATAMERT S,BHADESHIA H K D H.Microstructure and stability of Fe-Cr-C Hardfacing alloys[J].Materials Science and Engineering A,1990,130:101-111.
[6]	YUN E,LEE S.Correlation of microstructure with hardness and wear resistance in Cr3C2/stainless steel surface composites fabricated by high-energy electron beam irradiation[J].Materials Science and Engineering A,2005,405:163-172.
[7]	WANK A,WIELAGE B,POKHMURSKA H,et al.Comparison of hard metal and hardchromium coatings under different tribological conditions[J].Surface and Coatings Technology,2006,201(5):1975-1980.

Cited By

Get Citation

PDF

XML

Article views (3) PDF downloads (0)

Turn off MathJax

Article Contents

Abstract

References

Microstructure and Wear Resistance of (Cr,Fe)7C3/γ-Fe Alloy Cladding Layer Synthetized by VEB

Abstract

References

Catalog

Export File

Citation

Format

Content

Microstructure and Wear Resistance of (Cr,Fe)₇C₃/γ-Fe Alloy Cladding Layer Synthetized by VEB