• 中文核心期刊
  • CSCD中国科学引文数据库来源期刊
  • 中国科技核心期刊
  • 中国机械工程学会材料分会会刊
Advanced Search
XING Zhi-guo, Lv Zhen-lin, CUI Yong. Erosive Wear Resistance of Epoxy Resin/SiC Wear Resistant Coating Modified by Polyurethane[J]. Materials and Mechanical Engineering, 2010, 34(1): 84-87.
Citation: XING Zhi-guo, Lv Zhen-lin, CUI Yong. Erosive Wear Resistance of Epoxy Resin/SiC Wear Resistant Coating Modified by Polyurethane[J]. Materials and Mechanical Engineering, 2010, 34(1): 84-87.
shu

Erosive Wear Resistance of Epoxy Resin/SiC Wear Resistant Coating Modified by Polyurethane

More Information
  • Received Date: September 04, 2009
    Graphical Abstract
    • Abstract
  • The adhesive strength and erosive wear resistance of SiC particles wear resistant coating bonded by polyurethane modified epoxy resin were studied by changing additive content of toughening agent polyurethane (PU).The results show that proper addition of PU could improve the bond behavior of epoxy resin.When PU addition was 15wt%,the bonding strength of SiC wear resistant coating bonded by modified epoxy resin was the highest.The erosion wear properties would be changed as the impact angle changed.The best erosion wear resistance would be obtained at large impact angle when the PU content was 30wt%-35wt%,and at small impact angle when the PU content was 5wt%-15wt%.The erosion wear property of SiC wear resistant coating bonded by modified epoxy resin was better than the white iron under the same impact condition at both small and large impact angles.
    • FullText(HTML)
    • References (15)
  • [1]
    材料耐磨抗蚀及其表面技术丛书编委会编.材料的磨料磨损[M].北京:机械工业出版社,1990.
    [2]
    WANG Yi-san,ZHANG Xin-yuan.Casting sintering techno-logy for producing iron base surface composites[J].Material and Design,2000,21:447-452.
    [3]
    CHAO P C.Tarbela dam-problems solved by novel concretes[J].Civ Eng,1990,50(12):59-62.
    [4]
    马海波,卿宁.聚氦酯互穿网络结构聚合物侧研究进展及应用[J].皮革化学,2003,21(3):4-9.
    [5]
    NUTTALL R J.Selection of abrasion resistant lining materials[J].Bulk Solids Handling,1985,5(5):1053-1055.
    [6]
    ARGARWALV K,MILLS D,MASON J S.A comparison of the erosion wear of steel and rubber in pneumatic conveying system pipelines[C]//Proc 6th Int Conf on Erosion by Liquid and Solid Impact.Cambridge:Cavendish Laboratory,2003.
    [7]
    施利毅,陈伟,陆永生,等.PU/EP共混物中的化学反应及粘接性能的研究[J].中国胶粘剂,1998,7(1):20-22.
    [8]
    徐化兵.金属基环氧/聚氨酯梯度耐磨涂层的制备及性能研究[D].长沙:湖南大学,2005.
    [9]
    WATSON J D,MUTTON D J.Metalographic observations of abrasive wear mechanisms[J].Aust Inst Met,1976,21(4):255-271.
    [10]
    崔佳,曲敏杰,刘伟,等.聚氨酯改性环氧树脂的研究[J].工程塑料应用,2009,37(2):24-27.
    [11]
    呈军,毕曙光,陈雷,等.聚氨酯改性环氧树脂的研究[J].热固性树脂,2009,24(3):25-28.
    [12]
    黄先威,刘竞超,万金涛,等.刚性聚氨酯增韧改性环氧树脂的研究[J].工程塑料应用,2005,33(2):19-22.
    [13]
    WATSON J D,MUTTON D J.Metalographic observations of abrasive wear machanisms[J].Aust Inst Met,1976,21(4):255-271.
    [14]
    周永欣.SiC颗粒增强钢基表面复合材料的制备及冲蚀磨损性能研究[D].西安:西安建筑科技大学,2007.
    [15]
    FINNIE I.Some reflections on the past and furture of erosion[J].Wear,1995,186/187:1-10.
    • Related Articles

  • Related Articles

    [1]WANG Yuanjing, CHEN Jian, ZHOU Libo, LI Chaoying, LIAO Xingyu. Fabrication and Compressive Deformation Behavior of Gradient Porous Ti-15Mo Alloy Material[J]. Materials and Mechanical Engineering, 2023, 47(10): 16-25. DOI: 10.11973/jxgccl202310003
    [2]ZHOU Qiong, DU Junlong, ZHANG Ergeng, HUANG Biao, LIANG Dandan, CHEN Qiang. Progress Review on Preparation of Hard Coating on Cermet Surface and Its Bonding Strength with Substrate[J]. Materials and Mechanical Engineering, 2023, 47(7): 1-6,36. DOI: 10.11973/jxgccl202307001
    [3]ZHOU Liming, WU Mingxia, LIAO Fuqiang, XIONG Ji, LI Yanbo, ZHANG Zhiyin. Finite Element Simulation on Residual Stress of Graphite/Ti(C,N)-Based Cermet Gradient Self-lubricating Composite[J]. Materials and Mechanical Engineering, 2021, 45(8): 91-97. DOI: 10.11973/jxgccl202108017
    [4]YANG Ji-nian, XU Ai-qin. Research Progress in Foaming and Molding Process of Polypropylene[J]. Materials and Mechanical Engineering, 2012, 36(8): 1-5.
    [5]WANG Yan-jun, LIU Zuo-min, WANG Shou-ren. Fabrication and Properties of Infiltration Type High Temperature Self-lubricating Metal Ceramics Composites[J]. Materials and Mechanical Engineering, 2010, 34(7): 42-45.
    [6]LI Jia-ke, LIU Lei, LIU Yi-chun, SHEN Bin, YU Zhi-shui, HU Wen-bin. Development of Brazing Joining Technology of Advanced Structural Ceramics to Metal Materials[J]. Materials and Mechanical Engineering, 2010, 34(4): 1-4.
    [7]LI Hui-jun, XU Li, JIANG Xiao-yu. Finite Element Analysis of Wear-resistance of Epoxy/Polyurethane Functional Gradient Coating[J]. Materials and Mechanical Engineering, 2008, 32(7): 79-81.
    [8]LIU Chang-sheng, FANG Jian-cheng, CHEN Qing-cai. Fabrication and Performance Evaluation of Functionally Graded Materials[J]. Materials and Mechanical Engineering, 2006, 30(10): 1-4.
    [9]YAN Xian-mei, XIONG Wei-hao, ZHENG Li-yun. Preparation of Functionally Graded Ti(C,N)-based Cermets with HIP Technology[J]. Materials and Mechanical Engineering, 2006, 30(5): 36-37.
    [10]LIU Zhan-qiang, WAN Yi, ZHOU Jun. Tool Materials for High Speed Machining and Their Fabrication Technologies[J]. Materials and Mechanical Engineering, 2006, 30(5): 1-4.

Catalog

    Get Citation
    PDF
    XML
    Article views (4) PDF downloads (0) Cited by()
    Turn off MathJax
    Article Contents
    Abstract
    References
    Related Articles

    Materials and Mechanical Engineering

    Address：99 Handan Road, ShanghaiPost Code: 200437

    Tel：021-65556775-368Email:mem@mat-test.com

    沪ICP备17055736号-5

    Supported by: Beijing Renhe Information Technology Co., Ltd.  Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return