• 中文核心期刊
  • CSCD中国科学引文数据库来源期刊
  • 中国科技核心期刊
  • 中国机械工程学会材料分会会刊
Advanced Search
YANG Kun, SHA Chun-peng, XUAN Li-zhuo, TANG Zhi-hui. Comparison on Effects of Zn-Ni Alloy Coating and Cd Coating on Fatigue Properties of Structural Steel 30CrMnSiA[J]. Materials and Mechanical Engineering, 2015, 39(5): 81-84.
Citation: YANG Kun, SHA Chun-peng, XUAN Li-zhuo, TANG Zhi-hui. Comparison on Effects of Zn-Ni Alloy Coating and Cd Coating on Fatigue Properties of Structural Steel 30CrMnSiA[J]. Materials and Mechanical Engineering, 2015, 39(5): 81-84.
shu

Comparison on Effects of Zn-Ni Alloy Coating and Cd Coating on Fatigue Properties of Structural Steel 30CrMnSiA

More Information
  • Received Date: January 25, 2015
    Graphical Abstract
    • Abstract
  • Zn-Ni alloy coating was prepared on 30CrMnSiA structural steel smooth and notched samples via electroplating process.The fatigue limits of the samples with Zn-Ni alloy coating were obtained by staircase method,the fatigue properties of the samples were studied by S-N curves and then to compare with that of the samples with Cd coating.The results indicate that the fatigue limit of the samples with Zn-Ni alloy coating are same with that of the samples with Cd coating under the same cycles,and the samples with differetn coatings own same fatigue life at different stresses.Based on the effects of the coatings on the fatigue proterties of the substrate,the Zn-Ni alloy coating can displace the Cd coating.
    • FullText(HTML)
    • References (13)
  • [1]
    黄攀,裴和中,张国亮,等.碱性锌镍合金电镀的研究现状及展望[J].材料热处理技术,2012,41(2):161-164.
    [2]
    汤新生,杭冬良,周佩佩.含镍量为12%～15%的碱性锌镍合金电镀工艺[J].电镀与涂饰,2012,31(2):10-13.
    [3]
    周长虹,肖洪兵,王超,等.碱性锌镍合金电镀工艺控制要点[J].电镀与涂饰,2013,32(1):21-24.
    [4]
    肖作安,费锡明,邹勇进.锌镍合金镀层耐腐蚀性的研究[J].材料保护,2005(3):15-17.
    [5]
    LI G Y,LIAN J S,NIU L Y,et al.Investigation of nanocrystalline zinc-nickel alloy coatings in fill alkal-inc zincate batch[J].Surface ＆ Coatings Technology,2005,191:59-67.
    [6]
    陈谢辉,谢华.化学镀镍磷镀层对弹簧钢疲劳性能的影响[J].机械工程材料,2007,31(3):20-23.
    [7]
    田伟,谢发勤,吴向清.锌镍合金镀层耐蚀性研究[J].腐蚀与防护,2006,27(11):552-554.
    [8]
    OPASKAR V C,BISHOP C V.Alkaline zinc-nickel alloy plating compositions,processes and articles therefrom:US,20060201820［P］.2006-09-14.
    [9]
    JIANG Y E,WANG L F,ZHAI C Q,et al.Corrosion behavior of pulse-plated Zn-Ni alloy coatingson AZ91 magnesiumalloy in alkalin esolutions[J].Thinsolid Films,2005,484:232-237.
    [10]
    沈品华.现代电镀手册(上册)[M].北京:机械工业出版社,2010:6-83,147-149.
    [11]
    胡遐林,张进军,王宇.锌镍合金镀层三价铬钝化研究[J].材料保护,2009,42(9):27-29.
    [12]
    曹楚南.腐蚀电化学原理[M].北京:化学工业出版社,2004:190-207.
    [13]
    曹楚南,张鉴清.电化学阻抗谱导论[M].北京:科学出版社,2002:46-75.
    • Related Articles

  • Related Articles

    [1]YANG Xiaohui, LI Xingdong, ZHANG Fan, YUE Caixu, LI Haixia. Effect of Heat Treatment on Reverted Austenite Content of 04Cr13Ni8Mo2Al Steel[J]. Materials and Mechanical Engineering, 2018, 42(7): 23-27. DOI: 10.11973/jxgccl201807005
    [2]CHEN Yeqing, WU Yiwen, QIN Ziwei, ZHOU Xiao, WANG Hongbin. Effect of Deep Cryogenic Treatment on Microstructure and Mechanical Properties of GCr15 Bearing Steel[J]. Materials and Mechanical Engineering, 2018, 42(5): 55-58,62. DOI: 10.11973/jxgccl201805011
    [3]CAO Ying, SUN Xiuhua, LU Wei. Influence of Heat Treatment on Microstructure and Hardness of Cr12W Steel[J]. Materials and Mechanical Engineering, 2017, 41(Z2): 85-88.
    [4]XU Wenhui, XU Guifang, LUO Rui, WU Xiaodong, CHENG Xiaonong. Low-Temperature Impact Property of 0Cr17Mn17Mo3NiN Austenitic Stainless Steel after Cryogenic Treatment[J]. Materials and Mechanical Engineering, 2017, 41(5): 27-31. DOI: 10.11973/jxgccl201705006
    [5]CHEN Bing-chuan, LI Guang-fu, YANG Wu. Conversion Relation of Leeb-hardness,Vickers-hardness and Strength of Austenitic Stainless Steels[J]. Materials and Mechanical Engineering, 2009, 33(9): 37-40.
    [6]LI Ping, DU Zhong-ze, FU Han-guang, FENG Zhen-jun. Effect of Heat Treatment Temperature on Microstructure and Hardness of High Vanadium High Speed Steel[J]. Materials and Mechanical Engineering, 2009, 33(6): 93-95.
    [7]BAO Jun-cheng, WANG Zhi-qi, ZHAO Jie, MA Xu. Hardness Decreasing Reason of Airscrew Bush Parts of Helicopter after Heat Treatment[J]. Materials and Mechanical Engineering, 2009, 33(2): 89-91.
    [8]TIAN Xu-hai, QI Xiang-qian. Effect of Heat Treatment on Microstructure and Hardness of T122 Steel Welding Joint[J]. Materials and Mechanical Engineering, 2008, 32(5): 20-22.
    [9]SONG Dong-li, JIAO Si-hai. Validation of Hardness Prediction Mathematic Models[J]. Materials and Mechanical Engineering, 2008, 32(3): 29-31.
    [10]XU Chong-long, CHEN Jiu-bang, WANG Yong-zheng. Influence of Heat Teatment on Hardness of Cu-Zn-Cr Alloys[J]. Materials and Mechanical Engineering, 2007, 31(2): 43-45.

Catalog

    Get Citation
    PDF
    XML
    Article views (5) PDF downloads (0) Cited by()
    Turn off MathJax
    Article Contents
    Abstract
    References
    Related Articles

    Materials and Mechanical Engineering

    Address：99 Handan Road, ShanghaiPost Code: 200437

    Tel：021-65556775-368Email:mem@mat-test.com

    沪ICP备17055736号-5

    Supported by: Beijing Renhe Information Technology Co., Ltd.  Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return