• 中文核心期刊
  • CSCD中国科学引文数据库来源期刊
  • 中国科技核心期刊
  • 中国机械工程学会材料分会会刊
Advanced Search
LI Jun-xian, SUN Bao-liang, SHAO Guang-jie. Friction and Wear Properties of SiC Particulate Reinforced Aluminum Matrix Composites[J]. Materials and Mechanical Engineering, 2006, 30(5): 62-65.
Citation: LI Jun-xian, SUN Bao-liang, SHAO Guang-jie. Friction and Wear Properties of SiC Particulate Reinforced Aluminum Matrix Composites[J]. Materials and Mechanical Engineering, 2006, 30(5): 62-65.
shu

Friction and Wear Properties of SiC Particulate Reinforced Aluminum Matrix Composites

More Information
  • Received Date: April 23, 2005
    Graphical Abstract
    • Abstract
  • The friction and wear properties of aluminum matrix composites reinforced with SiC particulates with different sizes and contents were studied against HFM605 type nonmetal friction materials under the condition of different friction loads and velocites.The friction factor decreased with increasing load and reached the minimum under high load and high velocity.The size and content of SiC particulates did not show obvious effect on the friction factor.The wear resistance of SiC composite was enhanced with the increase of content and decrease of size of SiC particulates.The friction and wear properties of composites were well improved by heat treatment process.
    • FullText(HTML)
    • References (11)
  • [1]
    Alpas A T,Zhang J.Effect of SiC particulate reinforcement on the dry sliding wear of aluminium-silicon alloys (A356)[J].Wear,1992,155 (1):83-104.
    [2]
    Manish Narayan,Surappa M K,Pramila Bai B N.Dry sliding wear of Al alloy 2024-Al2O3 particle metal matrix composites[J].Wear,1995,181-183:563-570.
    [3]
    Li Xianyao.Wear behaviour and microstructural characterization of worn surfaces and wear debris of a high purity aluminum and an aluminum-silicon alloy and an aluminum-silicon/silicon carbide composite sliding against an M2 steel[D].Canada Ottawa:The University of Manitoba,1999.
    [4]
    Lima S C,Guptaa M,Ren L,et al.The tribological properties of Al-Cu/SiCp metal-matrix composites fabricated using the rheocasting technique[J].Journal of Materials Processing Technology,1999,(89-90):591-596.
    [5]
    Miyajima T,Iwai Y.Effects of reinforcements on sliding wear behavior of aluminum matrix composites[J].Wear,2003,255(1-6):606-616.
    [6]
    许珞萍,邵光杰,李 麟.汽车轻量化用金属材料及其发展动态[J].上海金属,2002,24(3):1-7.
    [7]
    王文龙,吴军华,张国定.铝基复合材料的摩擦磨损性能[J].金属学报,1998,34(11):1179-1182.
    [8]
    黄洁雯.SiCp/ZL102复合材料的耐磨性研究及压铸件制备[D].南京:南京理工大学,2002.
    [9]
    马东辉,张永振,陈 跃,等.速度和压力对SiCp增强铝基复合材料摩擦磨损性能的影响[J].中国表面工程,2004,(1):24-27.
    [10]
    齐海波,樊云昌,丁占来.颗粒增强铝基复合材料在汽车制动盘上的应用[J].河北省科学院学报,2001,18(2):89-92.
    [11]
    马保吉,朱 均.SiCp增强铝基复合材料与Kevlar增强摩擦材料摩擦副摩擦磨损机理研究[J].润滑与密封,2003,(3):36-38.
    • Related Articles

  • Related Articles

    [1]TAN Dong, FU Kangxi, ZHANG Shiqi, XIA Shaohua, ZAN Yuning. Friction and Wear Behavior of Different Volume Fraction SiCp/Al Composites by Stir Casting Combined with Friction Stir Processing[J]. Materials and Mechanical Engineering, 2024, 48(9): 53-60. DOI: 10.11973/jxgccl240135
    [2]CAI Jiakun, WU Jisi, LI Xiaoyang, YANG Chenggang, ZHANG Qiang. Friction and Wear Properties of Copper/Polyimide Resin Matrix Composite Coordinated Modified by SiC and WS2 Particles[J]. Materials and Mechanical Engineering, 2022, 46(3): 19-24. DOI: 10.11973/jxgccl202203004
    [3]GAO Jicheng, SONG Zihao, ZHOU Lang, GU Cheng, GU Peiyang, SHEN Yifu. Effect of Friction Stir Processing Pass on Microstructure and Wear Resistance of PI/7075 Aluminum-base Composite[J]. Materials and Mechanical Engineering, 2019, 43(11): 27-31. DOI: 10.11973/jxgccl201911007
    [4]WANG Hui, WANG Shun-cheng, ZHENG Kai-hong, WANG Jian-hua, CHEN Xue-wen. Effects of SiC Mass Fractions on Microstructure and Properties of SiCp/6061 Aluminum Matrix Composite[J]. Materials and Mechanical Engineering, 2016, 40(3): 52-56. DOI: 10.11973/jxgccl201603013
    [5]YANG Jiao-yuan, HONG Xiao-lu, WEI Xi-cheng, WANG Wu-rong, OUYANG Qiu-bao, GU Hai-lin, FENG Qi. Dry Friction and Wear Characteristics of Al2O3 Continuous-Reinforced Aluminum Based Composites[J]. Materials and Mechanical Engineering, 2015, 39(4): 81-85.
    [6]ZHOU Yong-xin, XU Fei, Lv Zhen-lin, MA Lei, CHENG Cheng, SHENG Kun. Friction and Wear Properties of Cu Matrix Composites Hybrid Reinforced with SiC and Graphite Particles[J]. Materials and Mechanical Engineering, 2015, 39(2): 90-93.
    [7]YANG Xiao-xu, ZHANG Min, HUANG Ye, HU Xiao-gang, PAN Yu-li, CHENG Shi-hong, DU Mu, DING Yong-wen. Preparation and Friction and Wear Resistance of SiC/Ni Nano-Composite Coatings[J]. Materials and Mechanical Engineering, 2014, 38(7): 53-57.
    [8]ZHANG Ping, MA Li-qun, HUA Min, DING Yi, XIA Ming-liu. Damping Capacity of SiC Particulate Reinforced Mg-Zn-Zr Composites[J]. Materials and Mechanical Engineering, 2009, 33(4): 70-72.
    [9]Lv Liang, ZHU Hua, Feng TANG. Friction and Wear Properties of Aluminum Matrix Composites Reinforced by B4C Particulates[J]. Materials and Mechanical Engineering, 2007, 31(10): 64-66.
    [10]FAN Zhou, CHEN Hong, Wang Xia, YANG Mei, HUANG Ben-sheng. Effect of Small Amount of Boron on Microstructure and Wear Resistance of Special Brass[J]. Materials and Mechanical Engineering, 2006, 30(6): 63-65.

Catalog

    Get Citation
    PDF
    XML
    Article views (3) PDF downloads (0) Cited by()
    Turn off MathJax
    Article Contents
    Abstract
    References
    Related Articles

    Materials and Mechanical Engineering

    Address：99 Handan Road, ShanghaiPost Code: 200437

    Tel：021-65556775-368Email:mem@mat-test.com

    沪ICP备17055736号-5

    Supported by: Beijing Renhe Information Technology Co., Ltd.  Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return