Citation: | HUI Lin-hai, GENG Hao-ran, WANG Shou-ren, XU Jie. Progress on the Research of Al3Ti Intermetallics[J]. Materials and Mechanical Engineering, 2007, 31(9): 1-3. |
[1] |
张永刚,韩雅芳,陈国良,等.金属间化合物结构材料[M].北京:国防工业出版社,2001.
|
[2] |
陈国良,林均品.有序金属间化合物结构材料物理金属学基础[M].北京:冶金工业出版社,1999.
|
[3] |
Tohru Takahashi,Koji Tominaga,Yasuhiko Tsuchida,et al.Mechanical properties of L12 modified titanium trialuminides alloyed with chromium,iron and vanadium[J].Materials Science and Engineering,2002,A329/331:474-480.
|
[4] |
Varin R A,Zbroniec L.High-temperature ordered intermetallic alloys VII[C]//Koch CC,Liu CT,Stoloff NS,MRS Symp Proc.Pittsburgh,USA:MRS,1997:121-126.
|
[5] |
Varin R A,Zbroniec L,Czujko T,et al.Fracture toughness of intermetallic compacts consolidated from nanocrystalline powders[J].Materials Science and Engineering,2001,A300:1-11.
|
[6] |
Varin R A,Zbroniec L,Wang Z G.Fracture toughness and yield strength of boron-doped,high (Ti+Mn) L12 titanium trialuminides[J].Intermetallics,2001,9:195-207.
|
[7] |
傅云义,张津徐,胡庚祥,等.高能球磨对复相Al3Ti基金属间合金组织和性能的影响[J].金属学报,2000,36(6):561-566.
|
[8] |
张津徐,傅云义,孙坚,等.复相Al3Ti基合金的高温强化[J].材料工程,2000(11):26-31.
|
[9] |
Heilmaier M,Saage H,Eckert J.Formation of ODS L12–(Al,Cr)3Ti by mechanical alloying[J].Materials Science and Engineering,1997,A239/240:652-657.
|
[10] |
惠林海,耿浩然,王守仁,等.Al3Ti及其L12型变异合金的制备[J].济南大学学报,2007,21(2):188-191.
|
[11] |
张俊善,汪涛,祝美丽,等.燃烧合成TiA13化学反应动力学研究[J].金属学报,2002(10):1027-1030.
|
[12] |
Kumar K S,Dipietro M S,Whittenberger J D.Compression response of monolithic and particulate-reinforced composites of Al67Ti25Cr8 and Al66Ti25Mn9[J].Acta Metallurgica et Materialia,1993,41:1379-1389.
|
[13] |
Li Tiezheng,Grignon F,Benson D J,et al.Modeling the elastic properties and damage evolution in Ti–Al3Ti metal-intermetallic laminate (MIL) composites[J].Materials Science and Engineering,2004,A374:10-26.
|
[14] |
Wang Xiaoming,Jha Animesh,Brydson Rik.In situ fabrication of Al3Ti particle reinforced aluminium alloy metal-matrix composites[J].Materials Science and Engineering,2004,A364:339-345.
|
[15] |
赵玉厚,严文,苗瑞霞,等.原位增强体Al3Ti形成热力学及合金元素对其形貌影响[J].铸造技术,2005,26(6):481-485.
|
[16] |
王守仁,耿浩然,王英姿,等.金属基复合材料中网络结构陶瓷增强体的制备及研究进展[J].机械工程材料,2005,29(12):1-3.
|
[17] |
Toshio Matsubara,Tomohide Shibutani,Keisuke Uenishi,et al.Fabrication of TiB2 reinforced Al3Ti composite layer on Ti substrate by reactive-pulsed electric current sintering[J].Materials Science and Engineering,2002,A329/331:84-91.
|
[18] |
Keisuke Uenishi,Toshio Matsubara,Tomohide Shibutani,et al.Wear and oxidation resistance of Al2O3 particle dispersed Al3Ti composite with a nanostructure prepared by pulsed electric current sintering of mechanically alloyed powders[J].Intermetallics,2002,10:105-111.
|