Elevated Temperature Tensile Properties and Microstructure of Carbon Nanotubes/ZM5 Alloy Composites

YUAN Qiu-hong; ZENG Xiao-shu; QI Dao-hua; ZHOU Guo-hua

Materials and Mechanical Engineering > 2008 > 32(5): 29-32.

YUAN Qiu-hong, ZENG Xiao-shu, QI Dao-hua, ZHOU Guo-hua. Elevated Temperature Tensile Properties and Microstructure of Carbon Nanotubes/ZM5 Alloy Composites[J]. Materials and Mechanical Engineering, 2008, 32(5): 29-32.

Citation:

PDF (1072 KB)

Elevated Temperature Tensile Properties and Microstructure of Carbon Nanotubes/ZM5 Alloy Composites

More Information

Received Date: September 29, 2007

Graphical Abstract

Abstract

Abstract

Carbon nanotubes(CNTs)/ZM5 alloy composites were fabricated by stirring casting method with the protection of Ar.High temperature tensile properties of the composites were tested and the fracture sections were observed via SEM.The results show that the CNTs/ZM5 alloy composites has good tensile properties at high temperature.When the tensile rate was 1mm/min,the tensile strength of the composites was up to 117.65 MPa at 473 K,increased by 20% to the as-cast ZM5.While the maximum ductility of the composites was 8.32% at the 05% addition of CNTs,enhanced by 21.62% to the as-cast ZM5.And the fracture mode of the composites mainly consisted of dimples and tear edges at the elevated temperature.
- ZM5 magnesium alloy,
- carbon nanotubes,
- composite,
- high temperature performance

FullText(HTML)

References (14)

References

[1]	Michael M.Magnesium and Magnesium Alloys[M].Ohio:Materials Park,2000.
[2]	Dargusch M,Hish M,Caceres C H,et al.Elevated temperature deformation of die cast Mg alloy AZ91[C]//Proc.of the 3rd Int.Mg Conf.LORIMER G W ed.Mancherster:[s n],1996.
[3]	Iijima S.Helical microtubules of graphitic carbon[J].Nature,1991,354:56-58.
[4]	Baughman R H,Zakhidov A A,Heer W A.Carbon nanotubes-the route toward applications[J].Science,2002,297:787-792.
[5]	李四年.铸造法制备纳米碳管增强镁基复合材料的力学性能研究[J].铸造,2004,54(3):31-34.
[6]	Goh C S.Development of novel carbon nanotube reinforced magnesium nanocomposites using the powder metallurgy technique[J].Nanotechnology,2006,17(1):7-12.
[7]	Goh C S,Wei J,Lee L C,et al.Simultaneous enhancement in strength and ductility by reinforcing magnesium with carbon nanotubes[J].Mater Sci Eng,2006,A423:153-156.
[8]	赵云虎,王渠东,丁文江,等.Be对铸造Mg合金组织和力学性能的影响[J].特种铸造及有色合金,2000(3):10-12.
[9]	闵学刚,朱旻,孙扬善,等.Ca对AZ91显微组织及力学性能的影响[J].材料科学与工艺,2002,10(1):93-96.
[10]	Polmear I J.Magnesium alloys and applications[J].Mater Sci Tech,1994,10:1-16.
[11]	Zhou S M,Zhang X B,Ding Z P,et al.Fabrication and tribological properties of carbon nanotubes reinforced Al composites prepared by pressureless infiltration techniqu e[J].Composites,2006,10:1-6.
[12]	Kuzumaki T,Miyazawa K,Ichinose H,et al.Processing of carbon nanotube reinforced aluminum composite[J].J Mater Res,1998,13(9):2445-2449.
[13]	吴安如,董丽君,夏长清,等.稀土元素对镁合金高温力学性能的影响[J].热加工工艺,2006,35(4):26-30.
[14]	陈礼清,郭金花,王继杰,等.原位反应自发渗透法TiC/AZ91D镁基复合材料及AZ91D镁合金的拉伸变形与断裂行为[J].稀有金属材料与工程,2006,35(1):29-33.

Cited By

Get Citation

PDF

XML

Article views (3) PDF downloads (0)

Turn off MathJax

Article Contents

Abstract

References

Elevated Temperature Tensile Properties and Microstructure of Carbon Nanotubes/ZM5 Alloy Composites

Abstract

References

Catalog

Export File

Citation

Format

Content