Influence of Carbon Content on Crack Sensitivity of TiC/Ni Coatings Prepared by In-situ Fabrication through Laser Cladding

HE Qing-kun; WANG Yong; TAO De-can; MENG Fan-gang; CHENG Yi-yuan

Materials and Mechanical Engineering > 2009 > 33(2): 67-70.

HE Qing-kun, WANG Yong, TAO De-can, MENG Fan-gang, CHENG Yi-yuan. Influence of Carbon Content on Crack Sensitivity of TiC/Ni Coatings Prepared by In-situ Fabrication through Laser Cladding[J]. Materials and Mechanical Engineering, 2009, 33(2): 67-70.

Citation:

PDF (955 KB)

Influence of Carbon Content on Crack Sensitivity of TiC/Ni Coatings Prepared by In-situ Fabrication through Laser Cladding

More Information

Received Date: November 13, 2008

Graphical Abstract

Abstract

Abstract

In order to decrease the crack sensitivity of TiC/Ni coatings prepared by in-situ fabrication through laser cladding,the effect of carbon content on crack senstivity of the coating was studied by optical microscope,scanning electronic microscope and X ray diffraction.The results indicated that the microstructure of the coatings can be improved and the crack sensitivity of coatings can be reduced through decreasing carbon content in the coatings.When the mass ratio of graphite and titanium powders was 1∶5,coatings without cracks were obtained.
- laser cladding,
- in-situ fabrication,
- crack sensitivity,
- Ni base coating

FullText(HTML)

References (10)

References

[1]	Lewisa G K,Schlienger E.Practical considerations and capabilities for laser assisted direct metal deposition[J].Materials and Design,2000,21:417-423.
[2]	Schwendner K I,Banerjee R,Collins P C,et al.Direct laser deposition of alloys from elemental powder blends[J].Scripta Materialia,2001,45:1123-1129.
[3]	赵亚凡,陈传忠.激光熔覆金属陶瓷涂层开裂的机理及防止措施[J].激光技术,2006,30(1):16-19,22.
[4]	时海芳,胡世菊,侯柏松,等.25SiMnMoV钢粒状贝氏体回火过程研究[J].煤矿机械,2000(1):28-30.
[5]	ZHONG Minlin,LIU Wenjin.Comparative research on cracking tendency in powder feeding laser cladding sttellite and NiCrSiB alloys[J].Chinese Journal of Lasers,2002,29(11):1032-1036.
[6]	CHEN Jing,YANG Haiou,LI Yanmin,et al.The research on two kinds of cracking behavior and mechanism of cladding in rapid laser forming process[J].Applied Lasers,2002,22(3):300-304.
[7]	孙一唐.工具钢及其热处理[M].北京:机械工业出版社,1986:65-69.
[8]	Liu Xiubo,Yu Gang,Pang Ming.Dissimilar autogenous full penetration welding of superalloy K418 and 42CrMo steel by a high power CW Nd: YAG[J].Laser Applied Surface Science,2007,253(17):7281-7289.
[9]	宋武林,朱蓓蒂,甘翠华,等.激光熔覆层结晶方向对覆层裂纹方向和开裂敏感性的影响[J].中国激光,1995,22(4):309-312.
[10]	董建新,张麦仓,曾燕屏.新型Ni-Cr基GH648合金成分对热力学平衡相析出行为的影响[J].稀有金属材料与工程,2005,34(1):51-55.

Cited By

Get Citation

PDF

XML

Article views PDF downloads

Turn off MathJax

Article Contents

Abstract

References

Influence of Carbon Content on Crack Sensitivity of TiC/Ni Coatings Prepared by In-situ Fabrication through Laser Cladding

Abstract

References

Catalog

Export File

Citation

Format

Content