• 中文核心期刊
  • CSCD中国科学引文数据库来源期刊
  • 中国科技核心期刊
  • 中国机械工程学会材料分会会刊
Advanced Search
ZHAN Li-hua, TAN Si-ge, HUANG Ming-hui, XU Hua-yang. Springback for 2124 Aluminum Alloy during Creep Aging Forming[J]. Materials and Mechanical Engineering, 2013, 37(1): 63-67.
Citation: ZHAN Li-hua, TAN Si-ge, HUANG Ming-hui, XU Hua-yang. Springback for 2124 Aluminum Alloy during Creep Aging Forming[J]. Materials and Mechanical Engineering, 2013, 37(1): 63-67.

Springback for 2124 Aluminum Alloy during Creep Aging Forming

More Information
  • Received Date: September 08, 2012
  • Based on variable curvature creep age forming test device, the effects of the aging time, aging temperature and elastic pre-deformation radius on the age-reinforced 2124 aluminum alloy creep age springback were studied, and the influence of pure bending and lateral force bending on springback of pieces was compared, and springback prediction model was established through multiple regression analysis, which was verified by experiments. The results show that, in the same test condition, the springback under the pure bending was larger than the transverse bending, which showed that the influence of the flexural deformation mode on springback could not be ignored. Regression model on the springback prediction results coincided with experimental results, and the maximum deviation was less than 9.62%, which verified the feasibility of the springback prediction model.
  • [1]
    HOLMAN M C. Autoclave age forming large aluminium aircraft panels[J].Journal of Mechanical Working Technology, 1989, 20: 477-488.
    [2]
    SALLAH M, PEDDIESON J, FOROUDASTAN S. A mathe-matical model of autoclave age forming[J].Journal of Materials Processing Technology, 1991, 28(1/2): 211-219.
    [3]
    NARIMET S P, PEDDIESON J, BUNCHANAN G R. A simulation procedure for panel age forming[J].Journal of Engineering Materials and Technology, 1998, 120(3): 183-190.
    [4]
    HO K C, LIN J, DEAN T A. Constitutive modelling of primary creep for age forming an aluminum alloy[J].Journal of Materials Processing Technology, 2004, 153/154(11): 122-127.
    [5]
    LIN J, HO K C, DEAN T A. An integrated process for modelling of precipitation hardening and springback in creep age-forming[J].International Journal of Machine Tools and Manufacture, 2006, 46(11): 1266-1270.
    [6]
    ZHU A W, STARKE E A. Materials aspects of age-forming of Al-xCu alloys[J].Journal of Materials Processing Technology, 2001, 117(3): 354-358.
    [7]
    LEVERS A, PRIOR A. Finite element analysis of shot peening[J].Journal of Materials Processing Technology, 1998, 80/81: 304-308.
    [8]
    WATCHAM K. Airbus A380 takes creep aging forming to new heights[J].Materials Word, 2004, 12(2): 10-11.
    [9]
    PITCHER P D, STYLES C M. Creep age-forming of 2024A, 8090 and 7449 alloys[J]. Journal of Materials Science Forum, 2000, 331/337: 455-460.
    [10]
    JEUNECHAMPS P P, HO K C , LIN J, et al. A closed form technique to predict springback in creep age forming[J].International Journal of Mechanical Sciences, 2006, 48(6): 621-629.
    [11]
    HO K C, LIN J, DEAN T A. Modelling of springback in creep forming thick aluminium sheets[J]. International Journal of Plasticity, 2004, 20: 733-751.
    [12]
    甘忠, 洪江波. LY12CZ铝合金材料的时效成形理论与试验研究[D].西安: 西北工业大学, 2005: 58-80.
    [13]
    曾元松, 黄遐, 黄硕. 蠕变时效成形技术研究现状与发展趋势[J].塑性工程学报, 2008, 15(3): 1-8.
    [14]
    黄遐, 曾元松, 黄硕.铝合金2324蠕变时效成形实验研究[J].塑性工程学报, 2009(3): 136-139.
    [15]
    ZHAN Li-hua, LIN Jian-guo, DEAN T A. A review of the development of creep age forming: Experimentation, modeling and applications[J]. International Journal of Machine Tools & Manufacture, 2010, 51(1): 1-17.
    [16]
    周宪斌, 常和生, 戴美云.时效应力松弛校形原理及其在蒙皮制造中的应用[J].北京航空航天大学学报, 1992(2): 65-71.

Catalog

    Article views (1) PDF downloads (0) Cited by()

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return