• 中文核心期刊
  • CSCD中国科学引文数据库来源期刊
  • 中国科技核心期刊
  • 中国机械工程学会材料分会会刊
Advanced Search
FENG Yue-hai, WANG Ke-hong, GAO Fei, DU Gang. Microstructure and Tensile Strength of Rust-Proof Aluminum Plate and Zinc-Coated Steel Plates Braze-Weld Joint Prepared by Cold Metal Transfer[J]. Materials and Mechanical Engineering, 2013, 37(6): 89-92.
Citation: FENG Yue-hai, WANG Ke-hong, GAO Fei, DU Gang. Microstructure and Tensile Strength of Rust-Proof Aluminum Plate and Zinc-Coated Steel Plates Braze-Weld Joint Prepared by Cold Metal Transfer[J]. Materials and Mechanical Engineering, 2013, 37(6): 89-92.
shu

Microstructure and Tensile Strength of Rust-Proof Aluminum Plate and Zinc-Coated Steel Plates Braze-Weld Joint Prepared by Cold Metal Transfer

More Information
  • Received Date: December 29, 2012
    Graphical Abstract
    • Abstract
  • The cold metal transfer (CMT) brazing-welding process was used to weld dissimilar metals of LF21 rust-proof aluminum plate and DD51D+Z zinc-coated steel plate, and the microstructure and tensile strength of the joint were studied. The results show that the compound layer of middle interface zone of the braze-weld joint was intermetallic compound FeAl3 with thickness of 4-6 μm. The average transverse tensile strength of the joint was up to 77 MPa and strength coefficient was 0.6.
    • FullText(HTML)
    • References (7)
  • [1]
    张洪涛, 何鹏, 孔庆伟, 等.铝钢异种材料焊接研究现状与发展[J].焊接, 2006(12): 7-11.
    [2]
    PICKIN C G, YOUNG K. Evaluation of cold metal transfer(CMT) press for welding aluminum alloy[J].Science and Technology of Welding and Joining, 2006, 11(5): 583-585.
    [3]
    MARTEN S, SVEN J, UWE F, et al. Joining of steel-aluminum mixed joints with energy-reduced GMA processes and filler materials on an aluminum and zinc basis[J].Welding and Cutting, 2008, 7(1): 45-53.
    [4]
    OZEM E G, CHIRISTOPH G. Effect of filler wire composition and metallic coating on the joint performance of aluminum/steel braze-welds[J].Welding and Cutting, 2008, 7(5): 303-312.
    [5]
    BACHA F, BENIYASHB A. Joining of steel-aluminum hybrid structures with electron beam on atmosphere[J].Advanced Materials Research, 2005, 6/8: 143-156.
    [6]
    MATHIEU A, SHABADI R, DESCHAMPS A, et al. Dissimilar material joining using laser (aluminum to steel using zinc-based filler wire)[J].Optics & Laser Technology, 2007, 39(3): 652-661.
    [7]
    LAUKANT H, WALLMANN C, KORTE M, et al. Flux-less joining technique of aluminum with zinc-coated steel sheets by a dual-spot-laser beam[J].Advanced Materials Research, 2005, 6/8: 163-170.
    • Related Articles

  • Related Articles

    [1]YANG Xiaohui, LI Xingdong, ZHANG Fan, YUE Caixu, LI Haixia. Effect of Heat Treatment on Reverted Austenite Content of 04Cr13Ni8Mo2Al Steel[J]. Materials and Mechanical Engineering, 2018, 42(7): 23-27. DOI: 10.11973/jxgccl201807005
    [2]CHEN Yeqing, WU Yiwen, QIN Ziwei, ZHOU Xiao, WANG Hongbin. Effect of Deep Cryogenic Treatment on Microstructure and Mechanical Properties of GCr15 Bearing Steel[J]. Materials and Mechanical Engineering, 2018, 42(5): 55-58,62. DOI: 10.11973/jxgccl201805011
    [3]CAO Ying, SUN Xiuhua, LU Wei. Influence of Heat Treatment on Microstructure and Hardness of Cr12W Steel[J]. Materials and Mechanical Engineering, 2017, 41(Z2): 85-88.
    [4]XU Wenhui, XU Guifang, LUO Rui, WU Xiaodong, CHENG Xiaonong. Low-Temperature Impact Property of 0Cr17Mn17Mo3NiN Austenitic Stainless Steel after Cryogenic Treatment[J]. Materials and Mechanical Engineering, 2017, 41(5): 27-31. DOI: 10.11973/jxgccl201705006
    [5]CHEN Bing-chuan, LI Guang-fu, YANG Wu. Conversion Relation of Leeb-hardness,Vickers-hardness and Strength of Austenitic Stainless Steels[J]. Materials and Mechanical Engineering, 2009, 33(9): 37-40.
    [6]LI Ping, DU Zhong-ze, FU Han-guang, FENG Zhen-jun. Effect of Heat Treatment Temperature on Microstructure and Hardness of High Vanadium High Speed Steel[J]. Materials and Mechanical Engineering, 2009, 33(6): 93-95.
    [7]BAO Jun-cheng, WANG Zhi-qi, ZHAO Jie, MA Xu. Hardness Decreasing Reason of Airscrew Bush Parts of Helicopter after Heat Treatment[J]. Materials and Mechanical Engineering, 2009, 33(2): 89-91.
    [8]TIAN Xu-hai, QI Xiang-qian. Effect of Heat Treatment on Microstructure and Hardness of T122 Steel Welding Joint[J]. Materials and Mechanical Engineering, 2008, 32(5): 20-22.
    [9]SONG Dong-li, JIAO Si-hai. Validation of Hardness Prediction Mathematic Models[J]. Materials and Mechanical Engineering, 2008, 32(3): 29-31.
    [10]XU Chong-long, CHEN Jiu-bang, WANG Yong-zheng. Influence of Heat Teatment on Hardness of Cu-Zn-Cr Alloys[J]. Materials and Mechanical Engineering, 2007, 31(2): 43-45.

Catalog

    Get Citation
    PDF
    XML
    Article views PDF downloads Cited by()
    Turn off MathJax
    Article Contents
    Abstract
    References
    Related Articles

    Materials and Mechanical Engineering

    Address：99 Handan Road, ShanghaiPost Code: 200437

    Tel：021-65556775-368Email:mem@mat-test.com

    沪ICP备17055736号-5

    Supported by: Beijing Renhe Information Technology Co., Ltd.  Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return