Advanced Search

    column
    Microstructure and Tensile Properties at Room Temperature of 5052 Aluminum Alloy Processed by Groove Pressing Deformation
    YANG Kai-huai, ZENG Jian-min, ZOU Ze-chang, CHEN Wen-zhe
    2016, 40(4): 1-4. DOI: 10.11973/jxgccl201604001
    Abstract PDF
    In-Situ Produced Second Phase Particles and Grain Size in Weld Nugget Zone of Aluminum Plate after Friction Stir Processing
    CHEN Ji, DENG Mu-yang, CHEN Ke, ZHANG Lan-ting, SHAN Ai-dang
    2016, 40(4): 5-8. DOI: 10.11973/jxgccl201604002
    Abstract PDF
    Very High Cycle Fatigue Properties of GH4169 Ni-based Superalloy
    YAN Nu, HAN Xiao-qi, YU Yong-hua, YOU Min, PENG Wen-jie
    2016, 40(4): 9-12. DOI: 10.11973/jxgccl201604003
    Abstract PDF
    Chemical Composition and Manufacturing Process Optimization of D36 Offshore Platform Steel
    HUA Hao, CHEN Rong, LI Shu-jian, ZHAO Liang
    2016, 40(4): 13-17. DOI: 10.11973/jxgccl201604004
    Abstract PDF
    Combined Hot Pressing Sintering Technology for SiC Ceramic with High Density and Complex Shape
    LIU Xiu, QI Long-hao, HE Zhi-yong, ZHANG Qi-fu
    2016, 40(4): 18-20. DOI: 10.11973/jxgccl201604005
    Abstract PDF
    Effects of Heat Treatment on Microstructure and Low Cycle Fatigue Life of GH4169 Alloy
    ZENG Xu, ZHANG Xian-cheng, TU Shan-tung, XUAN Fu-zhen
    2016, 40(4): 21-24. DOI: 10.11973/jxgccl201604006
    Abstract PDF
    High-Temperature Low-Cycle Fatigue Properties of GH4169 Ni-based Superalloy
    YAO Liang-liang, ZHANG Xian-cheng, LIU Feng, TU Shan-tung, MA Cong
    2016, 40(4): 25-29. DOI: 10.11973/jxgccl201604007
    Abstract PDF
    Testing and Comparison of True Yield Ratio and Engineering Yield Ratio of Different Steels
    YAO Ting-zhen, XIAO Mei-xia, XU Tian-han, WANG Dang-hui
    2016, 40(4): 30-33. DOI: 10.11973/jxgccl201604008
    Abstract PDF
    Effect of Y2O3 Content on High Temperature Oxidation Resistance of Ni-20Cr-5Al Alloy
    SUN Duan-jun, LIANG Chun-yuan, SHANG Jin-long, LAI Can-wei, YIN Ji-hui, SONG Ya-ru, ZHANG Xiu-hai
    2016, 40(4): 34-37. DOI: 10.11973/jxgccl201604009
    Abstract PDF
    Numerical Simulation for Welding Sequence Optimization of Gymnastic Bicycle Frame
    ZHANG Hua, ZHOU Guang-tao, WANG Fei
    2016, 40(4): 38-42. DOI: 10.11973/jxgccl201604010
    Abstract PDF
    Grinding Force Model for the Axial Ultrasonic Assisted Ceramic Grinding
    LI Sha, ZANG Rui, CHAO Jun-chuang
    2016, 40(4): 43-47. DOI: 10.11973/jxgccl201604011
    Abstract PDF
    Calibration and Plastic Correction on Strain Release Coefficients in Welding Residual Stress Measurement of LY12 Aluminum Alloy by Blind-Hole Method
    SU Li-ji, ZHOU Guang-tao, LIU Hong-sheng
    2016, 40(4): 48-53. DOI: 10.11973/jxgccl201604012
    Abstract PDF
    Low Temperature Creep Model Selection and Verification of 316L and 2205 Stainless Steels for Oil Pipeline
    LI Jing-bo, JIN Xue-jun
    2016, 40(4): 54-58. DOI: 10.11973/jxgccl201604013
    Abstract PDF
    Numerical Simulation of Three-Point Bending Behavior of 6N01 Aluminum Alloy Plate with Medium Thickness
    CHEN Can-long, LI Jian-liang, KONG Jian
    2016, 40(4): 59-64. DOI: 10.11973/jxgccl201604014
    Abstract PDF
    Effects of Hot Extrusion on Microstructures and Hot Deformation Behavior of Powder Metallurgy Ni-base Superalloy PM-0002
    HE Guo-ai, YANG Chuan, LIU Feng, SI Jia-yong, LIU Chen-ze, JIANG Liang
    2016, 40(4): 65-70. DOI: 10.11973/jxgccl201604015
    Abstract PDF
    Finite Element Analysis of Precision Forging Process for 2Cr18Ni8W2 Stainless Steel Bar
    XIAO Qiang
    2016, 40(4): 71-74. DOI: 10.11973/jxgccl201604016
    Abstract PDF
    Effects of Material Mechanical Properties on Wall Thickness Variation in Numerical Control Rotary Draw Bending Process of Tubes
    FANG Jun, LU Shi-qiang, WANG Ke-lu, MIN Xu-guang
    2016, 40(4): 75-79. DOI: 10.11973/jxgccl201604017
    Abstract PDF
    Effect of Heating Rate on Austenitization of 22MnB5 Ultra High Strength Steel
    JIN Yong-ming, ZHANG Yi-sheng, LIANG Wei-kang, ZHENG Xu-yu, LI Yang
    2016, 40(4): 80-83. DOI: 10.11973/jxgccl201604018
    Abstract PDF
    Hot Deformation Behavior of Fe-Mn-Al-C Low Density Steel
    ZHANG Xiao-feng, YANG Hao, LENG De-ping, ZHANG Long, HUANG Zhen-yi, CHEN Guang
    2016, 40(4): 84-88. DOI: 10.11973/jxgccl201604019
    Abstract PDF
    Parameter Determination of Mooney-Rivlin Model and Finite Element Simulation of the Compression Deformation of Rubber Rail Fastener
    CHEN Kan, SHEN Jing-feng, YU Guan-ren, ZHU Wei-feng, LI Wei, ZHANG Shi-yue
    2016, 40(4): 89-92. DOI: 10.11973/jxgccl201604020
    Abstract PDF
    Finite Element Simulation and Optimization for Low Pressure Casting of Automobile Aluminum Alloy Wheel
    DING Jian, FAN Wei, ZHAO Nai-qin, ZHAO Wei-min, WANG Zhi-feng, LIU Li-hua
    2016, 40(4): 93-98. DOI: 10.11973/jxgccl201604021
    Abstract PDF
    Finite Element Simulation for Hot Stamping of Car Rear Axle Beam Made of 22MnB5 Steel
    JIN Xiao-chun, SONG Jia-nan, ZHANG Mei, XUE Yong-shen
    2016, 40(4): 99-103. DOI: 10.11973/jxgccl201604022
    Abstract PDF
    Hot Deformation Behavior of Duplex Stainless Steel UNS S32750
    ZHAO Xin, CHEN Lei
    2016, 40(4): 104-106. DOI: 10.11973/jxgccl201604023
    Abstract PDF
    Fracture Analysis of Butterfly Valve Clack for Nuclear Power Plant
    BIAN Chun-hua, ZHANG Wei, WANG Yun-wei
    2016, 40(4): 107-110. DOI: 10.11973/jxgccl201604024
    Abstract PDF