• 中文核心期刊
  • CSCD中国科学引文数据库来源期刊
  • 中国科技核心期刊
  • 中国机械工程学会材料分会会刊
Advanced Search
TIAN Lin-hai, ZONG Rui-lei, ZHU Xiao-dong, TANG Bin, HE Jia-wen. Structure and Properties of Cr-Cu-N Composite Films Prepared by Ion Beam Assisted Magnetron Sputtering[J]. Materials and Mechanical Engineering, 2006, 30(5): 30-32.
Citation: TIAN Lin-hai, ZONG Rui-lei, ZHU Xiao-dong, TANG Bin, HE Jia-wen. Structure and Properties of Cr-Cu-N Composite Films Prepared by Ion Beam Assisted Magnetron Sputtering[J]. Materials and Mechanical Engineering, 2006, 30(5): 30-32.
shu

Structure and Properties of Cr-Cu-N Composite Films Prepared by Ion Beam Assisted Magnetron Sputtering

More Information
  • Received Date: March 29, 2005
    Graphical Abstract
    • Abstract
  • Cr-Cu-N films were deposited using low energy ion beam assisted magnetron sputtering (IBAMS).The effects of copper and bombardment energy on structure,hardness and fracture toughness of the films were studied.The added copper had no obvious effects on the film structure and hardness at same bombardment energy of 400eV.But added copper was beneficial to improvement of the film fracture toughness.When the ion bombardment energy was increased from 400eV to 800eV,the film structure was changed remarkably and its fracture toughness and hardness were improved further.
    • FullText(HTML)
    • References (14)
  • [1]
    Veprek S,Reiprich S.A concept for the design of novel superhard coatings[J].Thin Solid Films,1995,268:64-71.
    [2]
    Musil J,Vlcek J.Magnetron sputtering of hard nanocomposite coatings and their properties[J].Surf Coat Technol,2000,142-144:557-566.
    [3]
    Musil J.Hard and superhard nanocomposite coatings[J].Surf Coat Technol,2000,125:322-330.
    [4]
    赵红雨,范秋林,宋力昕,等.纳米超硬复合薄膜的研究现状[J].无机材料学报,2004,19(1):9-16.
    [5]
    Baker M A,Kench P J,Joseph M C,et al.The nanostructure and mechanical properties of PVD CrCu (N) coatings[J].Surf Coat Technol,2003,162:222-227.
    [6]
    Karvánková P,Mnnling H-D,Eggs C,et al.Thermal stability of ZrN-Ni and CrN-Ni superhard nanocomposite coatings[J].Surf Coat Technol,2001,146-147:280-285.
    [7]
    Leyland A,Matthews A.Design criteria for wear-resistant nanostructured and glassy-metal coatings[J].Surf Coat Technol,2004,177-178:317-324.
    [8]
    Musil J,Leipner I,Kolega M.Nanocrystalline and nanocomposite CrCu and CrCu-N films prepared by magnetron sputtering[J].Surf Coat Technol,1999,115:32-37.
    [9]
    黄鹤,王学刚,朱晓东,等.离子束辅助磁控溅射沉积TiN薄膜的研究[J].稀有金属材料与工程,2002,31(3):205-208.
    [10]
    何家文.等离子体中生成薄膜及其强度[J].机械工程材料,1996,20(2):1-3.
    [11]
    刘福田,李兆前,王志,等.涂层材料性能测试技术[J].机械工程材料,2002,26(3):1-4.
    [12]
    Mehrotra P K,Quinto D T.Techniques for evaluating mechanical properties of hard coatings[J].J Vac Sci Technol,1985,A3(6):2401-2405.
    [13]
    Myung Hyun S,Lee Hyuk M,Shaginyan Leonid R,et al.Microstructure and mechanical properties of Cu doped TiN superhard nanocomposite coatings[J].Surf Coat Technol,2003,163-164:591-596.
    [14]
    Espinoza-Beltrán F J,Che-Soberanis O,García-González L,et al.Effect of the substrate bias potential on crystalline grain size,intrinsic stress and hardness of vacuum arc evaporated TiN/c-Si coatings[J].Thin Solid Films,2003,437:170-175.
    • Related Articles

  • Related Articles

    [1]CHEN Xiangyang, ZHANG Jin, MA Shengli, HU Haixia. Effect of Nitrogen Content on Microstructure and Properties of Ti-B-C-N Films[J]. Materials and Mechanical Engineering, 2024, 48(5): 62-66. DOI: 10.11973/jxgccl202405010
    [2]ZHENG Guohua, ZHANG Xinyao, CHEN Pei, SHAN Jianjun, TIAN Qingnian. Research Progress on Fracture Toughness Testing Technology of Ductile Cast Iron[J]. Materials and Mechanical Engineering, 2021, 45(10): 22-28. DOI: 10.11973/jxgccl202110003
    [3]LI Bin, SHI Tai-he, GUO Xi-shui, REN Jian. Relation between Fracture Toughness and Sample Thickness of High Strength X140 Casing Steel[J]. Materials and Mechanical Engineering, 2016, 40(10): 94-99. DOI: 10.11973/jxgccl201610021
    [4]CUI Qing-feng, HUI Hu, WANG Hao-yang, LI Pei-ning. Applicability of Empirical Correlations between Impact Energy and Fracture Toughness for Q345R Steel[J]. Materials and Mechanical Engineering, 2015, 39(12): 84-90. DOI: 10.11973/jxgccl201512020
    [5]HUI Hu, WANG Jia-huan, WANG Xian-he, CAO Yu-peng, YANG Fan. Determination of Fracture Toughness of 2.25Cr-1Mo Steel in Transition-Temperature Region Based on Master Curve Method[J]. Materials and Mechanical Engineering, 2015, 39(1): 98-101.
    [6]YAN Fang-fang, LI Wen-xing. Estimation of Aluminium Alloy Fracture Toughness by Fatigue Crack Growth Rate[J]. Materials and Mechanical Engineering, 2014, 38(12): 105-108.
    [7]LI Yue-bing, GAO Zeng-liang, LEI Yue-bao. Characterization Methods and Statistical Models of Fracture Toughness of Reactor Pressure Vessel Steels[J]. Materials and Mechanical Engineering, 2014, 38(4): 91-95.
    [8]WANG Han-ying, YANG Yan-qing, HANG Rui-qiang, WU Zhong, CHEN Yan. Effect of In-situ SiC Particle on Room-temperature Fracture Toughness of SiCP/MoSi2[J]. Materials and Mechanical Engineering, 2007, 31(8): 42-44.
    [9]WANG Yong-dong, LIU Rui-tang, GUO Chun-huan. Dynamic Fracture Toughness of Low Carbon Alloy Steel and Welding Joint[J]. Materials and Mechanical Engineering, 2007, 31(4): 40-42.
    [10]WANG Li-min, TAI Qing-an, YANG Gang, LIU Zheng-dong, BAO Han-sheng, WANG Chang, CHENG Shi-chang. Effect of the Cooling Speed on the Impact Toughness and Microstructure of 0Cr11Ni2MoVNb Steel[J]. Materials and Mechanical Engineering, 2006, 30(8): 31-33.

Catalog

    Get Citation
    PDF
    XML
    Article views (6) PDF downloads (0) Cited by()
    Turn off MathJax
    Article Contents
    Abstract
    References
    Related Articles

    Materials and Mechanical Engineering

    Address：99 Handan Road, ShanghaiPost Code: 200437

    Tel：021-65556775-368Email:mem@mat-test.com

    沪ICP备17055736号-5

    Supported by: Beijing Renhe Information Technology Co., Ltd.  Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return