Advanced Search

    column
    Effect of Welding Material and Heat Input on Tensile Property of Welded Joint of Q460 Steel Thick Plate
    FENG Xiangli, WANG Lei, LIU Yang
    2019, 43(3): 1-6,16. DOI: 10.11973/jxgccl201903001
    Abstract PDF
    Thermal Stability of Low Temperature Gas Carburized Layer on Surface of 316L Austenitic Stainless Steel
    SUN Ning, JIANG Yong, CHEN Jinyan, PENG Yawei, GONG Jianming
    2019, 43(3): 7-12,66. DOI: 10.11973/jxgccl201903002
    Abstract PDF
    Effect of Si to Mn Mass Ratio in Weld Metal on Droplet Transfer and Arc Stability of Stainless Steel Flux-cored Wire During Low-current Welding
    WANG Ning, LI Zhuoxin, TILLMANN Wolfgang, LI Guodong
    2019, 43(3): 13-16. DOI: 10.11973/jxgccl201903003
    Abstract PDF
    Service Temperature Evaluation Based on Microstructural Degradation of Gas Turbine Blade after Cumulative Operation for 2 700 h
    WANG Wei, JIANG Xiangwei, GAO Zhikun, CHI Qingxin, LI Hui, SHEN Jian, JIANG Sumeng, LOU Langhong
    2019, 43(3): 17-23. DOI: 10.11973/jxgccl201903004
    Abstract PDF
    Discussion on Upper Temperature Limit of 12Cr2MoWVTiB Steel Tube in Superheater for Power Plant
    JU Guangyu, WANG Ti, SONG Li, YUAN Hongyu, LIU Wensheng, XIE Zhaozeng, WANG Zhiwu
    2019, 43(3): 24-28. DOI: 10.11973/jxgccl201903005
    Abstract PDF
    Effect of Mn and Cr Addition on Microstructure and Tensile Property of Al-Mg-Si-Cu Aluminum Alloy for Vehicles
    LIU Jia, MA Zhimin
    2019, 43(3): 29-32,38. DOI: 10.11973/jxgccl201903006
    Abstract PDF
    Chemical Bath Deposition of ZnO Nanowires on Indium Tin Oxide Conductive Glass
    YANG Wenting
    2019, 43(3): 33-38. DOI: 10.11973/jxgccl201903007
    Abstract PDF
    Corrosion Resistance of Sensitized 430 Stainless Steel in Food Simulation Solution
    SHEN Lifeng, CAO Yanbin
    2019, 43(3): 39-43. DOI: 10.11973/jxgccl201903008
    Abstract PDF
    Microstructure and Mechanical Properties of Laser Tailor-Welded Joint of Dissimilar Thickness DP1180/DP590 Dual-Phase Steels
    SHANG Qinghui, SHU Ying, WANG Guodong, XING Fei, LI Yaxin, GUO Xuepeng
    2019, 43(3): 44-49. DOI: 10.11973/jxgccl201903009
    Abstract PDF
    Friction and Wear Behaviors of WC-Al2O3 Composite Paired with Si3N4 Ceramics and YG6 Cemented Carbide
    SU Qingde, ZHU Shigen, DING Hao, BAI Yunfeng, DI Ping
    2019, 43(3): 50-54. DOI: 10.11973/jxgccl201903010
    Abstract PDF
    Exponential Aging Model of Polymeric Materials for Nuclear Cables under γ-Ray Irradiation
    XU Jianfeng, GONG Yi, BAO Yichen
    2019, 43(3): 55-59. DOI: 10.11973/jxgccl201903011
    Abstract PDF
    Simulation of Residual Stress in Butt Girth Welding of Ultra-Thick 13MnNiMoR Steel Cylinder by Different Material Hardening Models
    GENG Luyang, TU Shantung, GONG Jianming, ZHANG Wei
    2019, 43(3): 60-66. DOI: 10.11973/jxgccl201903012
    Abstract PDF
    Deformation Amount and Grain Size of Inconel 625 Ni-based Supperalloy during Forging at Different Heating Temperatures
    WEI Zhenhua, LI Zhuguo, DURAND Camille
    2019, 43(3): 67-71. DOI: 10.11973/jxgccl201903013
    Abstract PDF
    Finite Element Simulation of Ultimate Internal Pressure of Pipes Containing Crack with Different Size and Its Calculation Equation Modification
    CHU Ruifeng, MA Tingxia, LIU Weiyang, GUO Yangliu, CHONG Zhewen
    2019, 43(3): 72-77. DOI: 10.11973/jxgccl201903014
    Abstract PDF
    Reason for Corrosion Perforation of Heat Exchanger Bundle of S31803 Duplex Stainless Steel
    LU Xiang, WANG Weize
    2019, 43(3): 78-81,86. DOI: 10.11973/jxgccl201903015
    Abstract PDF
    Reason for Fracture of 316L Austenitic Stainless Steel Shaft Head of Stabilizing Roll
    SHI Hao, WANG Weize
    2019, 43(3): 82-86. DOI: 10.11973/jxgccl201903016
    Abstract PDF