• 中文核心期刊
  • CSCD中国科学引文数据库来源期刊
  • 中国科技核心期刊
  • 中国机械工程学会材料分会会刊
Advanced Search
WANG Yu-hua, GAO Lin, WANG Hui, CUI Zhen, ZHANG Qing-lai, XIAO Fu-gui. Hot Incremental Forming of AZ31B Magnesium Alloy[J]. Materials and Mechanical Engineering, 2009, 33(7): 95-97.
Citation: WANG Yu-hua, GAO Lin, WANG Hui, CUI Zhen, ZHANG Qing-lai, XIAO Fu-gui. Hot Incremental Forming of AZ31B Magnesium Alloy[J]. Materials and Mechanical Engineering, 2009, 33(7): 95-97.
shu

Hot Incremental Forming of AZ31B Magnesium Alloy

More Information
  • Received Date: February 08, 2009
    Graphical Abstract
    • Abstract
  • Hot incremental forming technological test of cross-rolled AZ31B magnesium alloy was carried out by using orthogonal experiment method.The hot incremental deformation law of the alloy was investigated at different temperatures and forming parameters.The results show that the optimum conditions were the amount of feed was 0.1 mm,feed rate was 1 800 mm·min-1 at 250℃,the forming limit angle could reach to 61°.It was demonstrated that the thickness distribution along the hot formed part still accorded with the cosine law.
    • FullText(HTML)
    • References (10)
  • [1]
    余琨,黎文献,王日初,等.变形镁合金的研究、开发及应用[J].中国有色金属学报,2003,13(2):277-288.
    [2]
    DWAIN M M.A global review of magnesium parts in automobiles[J].Light Metal Age,1996,54(10):62.
    [3]
    莫健华,叶春生,黄树槐,等.金属板料数控渐进成型技术[J].航空制造技术,2002(12):25-27.
    [4]
    周六如.金属板料数控渐进成型机理及工艺的研究[D].武汉:华中科技大学,2004.
    [5]
    崔震,高霖,陆启建,等.复杂钣金零件渐进成型方法[J].机械工程学报,2007,43(12):235-239.
    [6]
    莫健华,韩飞.金属板材数字化渐进成型技术研究现状[J].中国机械工程,2008,19(4):491-497.
    [7]
    张青来,卢晨,朱燕萍,等.轧制方式对AZ31镁合金薄板组织和性能的影响[J].中国有色金属学报,2004,14(3):391-397.
    [8]
    周六如,莫建华,肖祥芷.板料零件数控渐进成型工艺研究[J].塑性工程学报,2003,10(4):27-29.
    [9]
    曾大本,李培杰.镁合金压铸业现状及发展趋势[J].铸造,2000(12):871-874.
    [10]
    HUSSAIN G,GAO L,DAR N U.An experimental study on some formability evaluation methods in negative incremental forming[J].Journal of Materials Processing Technology,2007,186(13):45-53.欢迎订阅欢迎投稿欢迎刊登广告和信息(下转第页)
    • Related Articles

  • Related Articles

    [1]SHOU Derong, DENG Zhenghua, ZHANG Chaoyang. Effect of Iron Addition on Microstructure and Properties of Cu-10Al-4Ni Powder Metallurgy Alloy[J]. Materials and Mechanical Engineering, 2023, 47(8): 18-22. DOI: 10.11973/jxgccl202308003
    [2]LUO Haiyu, LIU Bo, HUANG Zhihong, YANG Xiaokang. Effect of Sintering Temperature on Structure and Properties of Powder Metallurgy Fe-Cu-C Alloy under Industrial Condition[J]. Materials and Mechanical Engineering, 2020, 44(1): 68-73. DOI: 10.11973/jxgccl202001012
    [3]DENG Zhenghua, ZHANG Cong, WANG Haibao, ZUO Duquan. Effect of Sintering Temperature on Microstructure and Property of Powder Metallurgy Al-24Si Alloy[J]. Materials and Mechanical Engineering, 2019, 43(7): 20-23. DOI: 10.11973/jxgccl201907005
    [4]NIE Xiaoqian, ZHANG Chengcheng, WANG Runzi, ZHANG Xiancheng, TU Shantong. Creep-Fatigue Interaction Behavior of Powder Metallurgy Nickel-Based Superalloy FGH96[J]. Materials and Mechanical Engineering, 2019, 43(6): 8-11,17. DOI: 10.11973/jxgccl201906002
    [5]YUAN Guosen, YANG Zhanyao. Effect of Hot Extrusion on Microstructure and Tensile Strength of Powder Metallurgy 6061 Aluminum Alloy[J]. Materials and Mechanical Engineering, 2018, 42(1): 68-71. DOI: 10.11973/jxgccl201801014
    [6]SUN Fangfang, MA Shaobo, BI Gang, LI Qilong, WANG Feng. Influence of Sintering Temperature on Microstructure and Mechanical Properties of Powder Metallurgy Low-Alloy Steel[J]. Materials and Mechanical Engineering, 2017, 41(10): 48-51. DOI: 10.11973/jxgccl201710011
    [7]JIANG Xiao-dong, LIU Zi-li, ZOU De-hua, LIU Bo-lu. Microstructure and Properties of Fe-1.8Ni-0.5Mo-1.2Cu-0.2C Powders Metallurgy Gear Prepared by Warm Compaction[J]. Materials and Mechanical Engineering, 2012, 36(4): 46-49.
    [8]YANG Ming, LIU Zi-li, LIU Xi-liang, FEI Fei. Microstructure and Properties of Mg-Si-Zr Magnesium Alloy Prepared by Powder Metallurgy[J]. Materials and Mechanical Engineering, 2010, 34(5): 33-35.
    [9]WANG Jian-zhong, QU Xuan-hui, YIN Hai-qing, ZHOU Sheng-yu, YI Ming-jun. Research Progress of High Velocity Compaction Technology for High Densification of Powder Metallurgy[J]. Materials and Mechanical Engineering, 2008, 32(9): 5-8.
    [10]HAI Kun, HU Xue-sheng, GUO Shi-ju. Preparation of Powder Metallurgy Iron-based Friction Materials by Sprinkling Powder Process[J]. Materials and Mechanical Engineering, 2007, 31(1): 35-37.

Catalog

    Get Citation
    PDF
    XML
    Article views (3) PDF downloads (0) Cited by()
    Turn off MathJax
    Article Contents
    Abstract
    References
    Related Articles

    Materials and Mechanical Engineering

    Address：99 Handan Road, ShanghaiPost Code: 200437

    Tel：021-65556775-368Email:mem@mat-test.com

    沪ICP备17055736号-5

    Supported by: Beijing Renhe Information Technology Co., Ltd.  Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return