Advanced Search

    column
    Development of Brazing Joining Technology of Advanced Structural Ceramics to Metal Materials
    LI Jia-ke, LIU Lei, LIU Yi-chun, SHEN Bin, YU Zhi-shui, HU Wen-bin
    2010, 34(4): 1-4.
    Abstract PDF
    Research Progress on Preparation Technology of Tritium Penetration Barrier on Special-Shaped Pieces of Stainless Steel
    ZHANG Gui-kai, LI Ju, CHEN Chang-an, DOU San-ping
    2010, 34(4): 5-10.
    Abstract PDF
    Research Progress on Surface Oxidation Resistant Technology of Titanium Alloys
    ZHENG Ting, LUO Xin-yi, SUN Xiao-bing, CUI Hong, TAO Jie
    2010, 34(4): 11-13.
    Abstract PDF
    Microstructure and Mechanical Properties of Ti-15-3 Alloy after Cold Rolling and Aging Treatment
    GUO Qiang, WANG Qing, HAN Xiu-li, SUN Dong-li, WU Gao-hui, SUN Tao
    2010, 34(4): 14-17.
    Abstract PDF
    Hot Deformation Behavior and Processing Maps of AZ31 Magnesium Alloy
    XIAO Mei, ZHOU Zheng, HUANG Guang-jie, WANG Bing-shu
    2010, 34(4): 18-21.
    Abstract PDF
    Effects of Reduction and Finishing Temperature on Microstructure and Mechanical Properties of Nb Bearing Si-Mn Hot-Rolled Dual-phase Steel
    SHAO Yuan-yuan, SONG Zhi-chao, ZHANG Hong-mei
    2010, 34(4): 22-25.
    Abstract PDF
    Effects of Brush Plating Technological Parameters on Microstructure and Wear Resistance of Nickel Coatings
    XU Ting, TAN Ye-fa, LI Hua-bing, TAN Hua, CAI Bin
    2010, 34(4): 26-28.
    Abstract PDF
    Elimination of Banded Structure Defects in Hot-Rolled SNCM 220 Steel Plates
    LU Yu-tao, YANG Feng
    2010, 34(4): 29-30.
    Abstract PDF
    Band Structure Formation Mechanism in Directionally Solidified Al-38.5%Cu Alloy
    TANG Ling, LI Shuang-ming, AI Tao-tao, LI Wen-hu, FENG Xiao-ming
    2010, 34(4): 31-34.
    Abstract PDF
    Effect of Working Pressure on Microstructure and Properties of Plasma Nitrided Layer of H13 Steel
    ZHANG Jiao-jiao, YU Zhi-ming, HONG Rui-jiang, HOU Hui-jun
    2010, 34(4): 35-37.
    Abstract PDF
    Densification Mechanism and Wear Resistance of Fe Matrix Surface Composite Produced by Cast Sintering Technology
    YANG Shi-zhou, DING Yi-chao
    2010, 34(4): 38-41.
    Abstract PDF
    Structure of Si-Base BiFe0.95Mn0.05O3/Pb(Zr0.4Ti0.6)O3/BiFe0.95Mn0.05O3 Integrated Thin Film and Its Platinum Electrode Capacitor Properties
    MA Wen-liang, LIU Bao-ting, WANG Kuan-mao, BIAN Fang, LI Xiao-hong, ZHAO Qing-xun
    2010, 34(4): 42-46.
    Abstract PDF
    Microstructure and Properties of High Strength X100 Pipeline Steel with Dual Phase Through Controlled Rolling and Cotrolled Cooling
    ZHOU Min, DU Lin-xiu, YI Hai-long, LIU Xiang-hua
    2010, 34(4): 47-50.
    Abstract PDF
    Wear Resistance of High Speed Steel with DLC Surface Coating
    DAI Bing, WANG Bo, ZHANG Heng-hua, HUANG Bo, GAO Guo-qiang
    2010, 34(4): 51-54.
    Abstract PDF
    High Cycle Fatigue Property of EA4T Axle Steel with Different Components
    MENG Yang, LIANG Yi-long
    2010, 34(4): 55-57.
    Abstract PDF
    Bend-Bend Fatigue Crack Propagation Characteristics of PD3 and U71Mn Rail Steels
    HU Jia-jie, ZHONG Wen, LIU Qi-yue
    2010, 34(4): 58-61.
    Abstract PDF
    Microstructure and Properties of Nickel Coatings after Laser Cladding
    LIU Yan-hui, CHEN Zhen-yu, ZHOU Xi-ying
    2010, 34(4): 62-64.
    Abstract PDF
    Microstructure and Wear Resistance of Al-12%Sn Alloy Prepared by Mechanical Alloying
    LAI Qu-fang, ZENG Mei-qin, LU Zhong-chen
    2010, 34(4): 65-68.
    Abstract PDF
    Microstructure and Properties of Nanocrystalline Ni Coatings after Laser Cladding
    CHEN Jin-song, HUANG Yin-hui, TIAN Zong-jun, QIAO Bin, YANG Jian-ming
    2010, 34(4): 69-71.
    Abstract PDF
    Application Progress of Nano-reinforcement to Magnesium Matrix Composites
    BIAN Song-gang, LI Zi-quan, CHEN Ke, LIU Jin-song, ZHOU Heng-zhi, YANG Ji-nian
    2010, 34(4): 72-75.
    Abstract PDF
    Preparation and Anti-Coagulant Property of TiO2 Film Deposited on Nanocrystalline Titanium Substrate Surface
    ZHAO Guang-wei, SHAO Hong-hong, YU Chun-hang, XU Xiao-jing, DU Hong, ZHAI Rui, ZHENG Qian-wen
    2010, 34(4): 76-78.
    Abstract PDF
    Hot Rolling Cracking Causes of 200 Series Austenitic Stainless Steels and Correlative Process Improvement
    ZHONG Zheng-ye, SHENG Guang-min
    2010, 34(4): 79-83.
    Abstract PDF
    Failure Analysis of Fixed Bolts in Tobacco Machinery Fixed Blade
    WANG Wei-ze, LIANG Jia-chun, WANG Bo, XUAN Fu-zhen
    2010, 34(4): 84-86.
    Abstract PDF
    Finite Element Analysis of Small Punch Test for Ti Matrix Composites
    ZHU Cong-cong, J.MAK, W.Y.YEUNG, QIN Ji-ning, Lv Wei-jie, ZHANG Di
    2010, 34(4): 87-91.
    Abstract PDF
    Temperature Simulation of Single Pass Hot Rolling Process of Aluminum Alloy
    KANG Yu-hua, LIU Yi-lun, HE Yu-hui
    2010, 34(4): 92-96.
    Abstract PDF